Datasheet
• 457 mm (18 in) long, vinyl coated
• Works with cabled and quick-disconnect models of WL50,
WL50S, and LED..S50L
• Various mounting options
• Hex nut and o-ring are included (with 1/2-14 NPSM Base
connection models)
Models
Model Base Connection Light Connection Used with
FLX18-1212
1/2 - 14 NPSM
1/2 - 14 NPSM (Male)
WL50
WL50PB
WL50-2
WL50-2PB
(cabled and QD models)
FLX18-F12
3-Hole Flange
FLX18-12M30
1/2 - 14 NPSM
M30 x 1.5 (Female)
WL50
WL50PB
WL50S
WL50-2
WL50-2PB
LED..S50
(cabled and QD models)
FLX18-DM30
2 x 1/4-20W 1.375 spacing
FLX18-FM30
3-Hole Flange
Flex Arm Mounts
Original Document
170238 Rev. B 3 March 2014
170238
Base Dimensions
34.9
[1.38]
8.6
[.34]
2X 7.1 [.28]
10.7 [4.22]
6.35 [.25]
Accessories
Brackets
SMB22A
• Right-angle bracket with curved slot
for versatile orientation
• 12-ga. stainless steel
• Mounting hole for 22 mm sensor
32
41
46
A
B
C
Hole center spacing: A to B = 26.0
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2
· Use with Flex Arm Mount models with 1/2-14 NPSM Base Connection
SMBFLXCLAMPD
• Use with Flex Arm Mount
FLX18-DM30 model
64
43
51
A
B
SMBFLXMAG
• Use with Flex Arm Mount models
with 1/2-14 NPSM Base
Connection
49
38
ø22
ø81
SMBFLXMAGD
• Use with Flex Arm Mount
FLX18-DM30 model
13
ø9.5
ø85
2X 1/4-20
UNC
Bracket Protective Cover
SMBFLXMAGR
• Protective magnet cover
• Prevents scratches to painted
surfaces
• Used with SMBFLXMAG and
SMBFLXMAGD
Flex Arm Mounts
2 www.bannerengineering.com - tel: 763-544-3164 P/N 170238 Rev. B
LMB Sealed Right-Angle Bracket
Use with Flex Arm Mount models with 1/2-14 NPSM Base Connection
Model Description Construction
LMBE12RA
Pipe-Mount Models: Bracket kit with base,
½-14 pipe adapter, set screw, fasteners, o-
rings, and gaskets. For use with stand-off pipe
(listed and sold separately)
Black polycarbonate
LMBE12RAC Gray polycarbonate
Power Supply
Model Voltage Connection Description
PS24W 24 V dc at 1A 4-pin Euro QD Non-industrial (not sealed) power supply,
converts 100 - 240 V ac to 24 V dc
Field Wireable Connector
Model Style Pinout Dimensions
FIC-M12M4 4-Pin Male
Straight
1
4
3
2
1 = Brown
2 = Not used
3 = Blue
4 = Not used
M12 x 1
10 mm
60 mm
15.0 mm
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Flex Arm Mounts
www.bannerengineering.com - tel: 763-544-3164
