Surface Conditioning Wheels
TM
Convolute,
Unitized & Molded
Wheels
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Convolute / Molded Wheels . . . . . . . . . . . . . . . . 2 –12
Mineral and Density Charts . . . . . . . . . . . . . . . . . . . . . . . . . 2
Convolute Wheel Diameters and Standard Core Sizes . . . . . 2
Scotch-Brite Wheels for Deburring . . . . . . . . . . . . . . . . . . . 3
Scotch-Brite Wheels for Polishing . . . . . . . . . . . . . . . . . . . 4
Scotch-Brite Wheels for Finishing . . . . . . . . . . . . . . . . . . . 5
Scotch-Brite Wheels for Blending . . . . . . . . . . . . . . . . . . . . 6
Scotch-Brite EXL, EX2, EX3 Deburring Wheels . . . . . . . . . . 7
Scotch-Brite Light Deburring Wheel . . . . . . . . . . . . . . . . . . 7
Scotch-Brite SST Deburring Wheel . . . . . . . . . . . . . . . . . . . 8
Scotch-Brite SF Finishing and Deburring Wheel . . . . . . . . . 8
Scotch-Brite Cut and Polish / CPM Wheels . . . . . . . . . . . . . 9
Scotch-Brite Metal Finishing Wheel . . . . . . . . . . . . . . . . . . 9
Scotch-Brite Multi-Finishing Wheel . . . . . . . . . . . . . . . . . 10
Scotch-Brite General Purpose Wheel . . . . . . . . . . . . . . . . 10
Scotch-Brite Clean and Strip Rim Wheel . . . . . . . . . . . . . 11
Scotch-Brite Woodworking Wheel . . . . . . . . . . . . . . . . . . 11
3M XR Metalworking Wheel . . . . . . . . . . . . . . . . . . . . . . . 12
Unitized Wheels . . . . . . . . . . . . . . . . . . . . . . . . 13 19
Density and Mineral Charts . . . . . . . . . . . . . . . . . . . . . . . . 13
Scotch-Brite Wheels for Deburring . . . . . . . . . . . . . . . . . . 14
Scotch-Brite Wheels for Polishing,
Finishing and Blending . . . . . . . . . . . . . . . . . . . . . . . . . 15
Scotch-Brite EXL Unitized Wheel . . . . . . . . . . . . . . . . . . . 16
Scotch-Brite Roloc EXL Unitized Wheel . . . . . . . . . . . . . 16
Scotch-Brite SST Unitized Wheel . . . . . . . . . . . . . . . . . . . 17
Scotch-Brite Cut and Polish Unitized Wheel . . . . . . . . . . . 17
Scotch-Brite Metal Finishing Unitized Wheel . . . . . . . . . . 18
Scotch-Brite Clean and Strip
Unitized Wheel / Cup Wheel . . . . . . . . . . . . . . . . . . . . . . 18
Scotch-Brite General Purpose Unitized Wheel . . . . . . . . . 19
Scotch-Brite Buff and Polish Unitized Wheel . . . . . . . . . . 19
Factors Affecting Performance . . . . . . . . . . . . 2022
Product Surface Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Recommended Operating Speeds . . . . . . . . . . . . . . . . . . . 20
Lubricant–Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Product Hardness (Density) . . . . . . . . . . . . . . . . . . . . . . . . 20
Surface Speed Conversion Chart . . . . . . . . . . . . . . . . . . . . 20
Maximum Operating Speeds (Convolute Wheels and
Unitized Wheels) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Unitized Wheels with Dual Rating and Higher Maximum
Operating Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 2324
Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Mandrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Convolute and Unitized Equivalency Chart . . . . . . .25
1
11
1
1
1
Wheels
Today, 3M develops wheels with new and advanced technology
while continuously improving its existing product line.
Customers choose Scotch-Brite surface conditioning wheels
because of their ease of use and consistent results. In addition,
to assist in increasing productivity, customers are supported by
dedicated Technical Service teams and 3M Innovation Centers
around the world.
Scotch-Brite Wheels
Can improve surfaces without signifi cantly changing the
shape or dimension of the workpiece.
Are well-suited for an array of cleaning, blending, deburring,
nishing and polishing applications.
Help prevent undercutting or gouging through their controlled
abrasive action.
Provide consistent, uniform fi nishes as fresh abrasives are
continually exposed to the work surface.
Run cool and resist loading due to their open web
construction, which reduces the risk of part discoloration and
warping, while extending the life of the wheel.
Factors to consider when choosing a
starting point for your application
• Composition of workpiece and material type
• Material hardness
• Desired results to be achieved
• Size and shape of the work piece (area to be conditioned)
• Part variability
Tool/machinery type, including speed capability
• Previous and possible subsequent abrasive steps
Selecting Convolute vs. Unitized
This choice will often be determined by the part confi guration,
wheel size availability, tool speed or other fi xed circumstances.
Convolute is a wrapped construction on a standard sized core
and the “fl at” of the web becomes the cutting tool. The wheels
are one directional, which is indicated by an arrow on the side of
the wheel and arrows printed in the core.
Unitized is a layered construction with a selection of center hole
sizes and no core. The “edge” of the web becomes the cutting
tool. The wheels are non-directional.
See Convolute and Unitized equivalency chart on page 25.
Basic Performance Differences
Scotch-Brite wheels, one of the most complete selections
of surface conditioning wheels, continue to raise the bar for
performance even after fi ve decades.
Construction Finish Density Size
Convolute
Wrapped
construction
on a standard
sized core.
One directional
Finer finish
(grade for grade)
Softer and more
conformable*
4"–24" dia.
1/2"–36" wide
Unitized
Layered
construction
with no core.
Non-directional.
More aggressive
and durable
(grade for grade)
Harder and less
conformable
1/2"–14" dia.
1/8"–1" wide
Exceptions depend on product type. Refer to the specific description page for availability.
* When comparing same density numbers
2
22
2
2
More
Aggressive
Harder
Less
Aggressive
Softer
Convolute / Molded Wheels
Scotch-Brite Convolute Wheel performance differences can be attributed to mineral (aggressiveness) and
density (hardness). The combination of these two characteristics and subtle variations determine if the wheel
will cut more aggressively or will be more durable and less conformable (See depiction below).
Convolute Wheel Diameters and Standard Core Sizes
Wheel Diameter 4" 6" 8" 10" 12" 14" 16" 18" 20" 24"
Standard Core Size 1" 1", 1-1/4" 3" 5" 5" 8" 10" 10" 12" 12"
Legend
CP Cut and Polish Wheel GP General Purpose Wheel SF SF Finishing and Deburring Wheel
CPM CPM Wheel LDW Light Deburring Wheel SST SST Deburring Wheel
CS Clean and Strip Rim Wheel MF Metal Finishing Wheel XR XR Metalworking Wheel
EXL EXL Deburring Wheel MU Multi-Finishing Wheel
* Numeric designators (8/9) represent mineral aggressiveness; not density.
** XR Wheel Grades: 2410 = 240/100 Grade Mineral; 1208 = 120/80 Grade Mineral; 805 = 80/50 Grade Mineral
*** XR Wheel Density: H = Hard
3
3
Deburring
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Deburr machined or
formed parts
EXL Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Deburr shear edges EX2 Deburring Wheel,
9S-fine (FIN)
EX2 Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
9S-fine (FIN)
Deburr keyways EXL Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Stainless Steel,
Titanium
(Nickel Alloys)
Deburr turbine blades EXL Deburring Wheel,
9S-fine (FIN)
SF Finishing and
Deburring Wheel,
11S-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Remove wire edges on
surgical instruments
EXL Deburring Wheel,
9S-fine (FIN)
SF Finishing and
Deburring Wheel,
8S-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Radius edges on
stamped parts
EX2 Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Deburr piston rings EXL Deburring Wheel,
8S-fine (FIN)
EX2 Deburring Wheel,
9S-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN)
Aluminum, Copper,
Brass (Soft Metals)
Remove aluminum
flashing
EX2 Deburring Wheel,
9S-fine (FIN)
EX2 Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Radius edges of
aluminum extrusions
EXL Deburring Wheel,
8S-fine (FIN)
EXL Deburring Wheel,
9S-fine (FIN)
Light Deburring Wheel,
8S-fine (FIN)
Deburr automotive or
appliance trim
EXL Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
Light Deburring Wheel,
7S-fine (FIN)
Deburr brass medallions Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
9S-fine (FIN)
General Purpose Wheel,
5A-very fine (VFN)
Other — Composites,
Plastics, Glass, etc.
Deburr plastic parts Light Deburring Wheel,
6S-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN)
General Purpose Wheel,
5A-very fine (VFN)
A= Aluminum Oxide S=Silicon Carbide
Convolute / Molded Wheels
Scotch-Brite Wheels for Deburring
HarderSofter
4
Convolute / Molded Wheels
Scotch-Brite Wheels for Polishing
Less
Aggressive
More
Aggressive
Polishing
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Centerless polishing of
hydraulic rods
Cut and Polish Wheel,
5A-fine (FIN)
Cut and Polish Wheel,
7A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Polish roller bearings EXL Deburring Wheel,
8S-fine (FIN)
Cut and Polish Wheel,
5A-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN)
Polish hydraulic
rod spools
Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
8S-medium (MED)
Light Deburring Wheel,
6S-fine (FIN)
Polish molds
and dies
Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
8S-fine (FIN)
General Purpose Wheel,
6S-super fine (SFN)
Stainless Steel,
Titanium
(Nickel Alloys)
Final polish of
surgical instruments
EX2 Deburring Wheel,
9S-fine (FIN)
Cut and Polish Wheel,
7A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Final polish on
orthopaedic implants
EXL Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
Light Deburring Wheel,
7S-fine (FIN)
Polish turbine
engine components
EXL Deburring Wheel,
8S-fine (FIN)
EXL Deburring Wheel,
9S-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN)
Aluminum, Copper,
Brass (Soft Metals)
Pre-plating polish Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
9S-fine (FIN)
General Purpose Wheel,
6S-very fine (VFN)
Polish brass
medallions
Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
8S-fine (FIN)
Light Deburring Wheel,
6S-fine (FIN)
Polish name plates Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
8S-fine (FIN)
Light Deburring Wheel,
6S-fine (FIN)
Polish jewelry Light Deburring Wheel,
6S-fine (FIN)
EXL Deburring Wheel,
8S-fine (FIN)
Buff and Polish Wheel,*
soft density
Other — Composites,
Plastics, Glass, etc.
Polish bevel edges
of glass
General Purpose Wheel,
6A-very fine (VFN)
Light Deburring Wheel,
8S-fine (FIN)
General Purpose Wheel,
6S-super fine (SFN)
A= Aluminum Oxide S=Silicon Carbide
*Buff and polish wheels are non-abrasive unitized wheels designed to work with compounds.
4
4
hydraulic
ro
ds
5A
-
fine
(FIN)
7A
-
medium
(MED)
8S
-
fine
(FIN
)
P
o
li
s
h
ro
ll
er
b
ear
i
ngs
EXL
D
e
b
urr
i
ng
Wh
ee
l
,
8
S
-fine (FIN)
C
ut and Polish Wheel,
5A-fine (FIN)
Li
g
h
t
D
e
b
urr
i
ng
Wh
ee
l
,
7
S
-fine (FIN
)
P
o
li
s
h
hyd
rau
l
i
c
r
o
d
spoo
l
s
Ligh
t
D
e
b
urr
i
n
g
Wh
ee
l
,
7S-fine
(
FIN
)
EXL
D
e
b
urr
i
n
g
Wh
ee
l
,
8
S-medium
(
MED
)
Ligh
t
D
e
b
urr
i
n
g
Wh
ee
l
,
6
S-fine
(
FIN
)
Po
li
s
h m
o
l
ds
a
n
d
d
i
es
Light Deburring Wheel,
7
S
-fine
(
FIN
)
EXL Deburring Wheel,
8S
-fine
(
FIN
)
G
eneral Pur
p
ose Wheel,
6S
-super fine
(S
FN
)
S
tainless
S
teel,
T
itanium
(
N
i
ckel Allo
y
s
)
F
inal polish o
f
surg
i
ca
l
i
nstrument
s
EX
2
D
e
b
urr
i
ng
Wh
ee
l
,
9
S-fine (FIN)
C
ut and Polish Wheel,
7A
-me
di
um
(MED)
EXL
D
e
b
urr
i
ng
Wh
ee
l
,
8S-fine (FIN
)
F
inal
p
olish on
o
rt
h
opae
di
c
i
mp
l
ants
EXL Deburrin
g
Wheel,
9
S-fine
(
FIN
)
EXL Deburrin
g
Wheel,
8A
-me
di
um
(M
ED
)
L
i
g
ht Deburrin
g
Wheel,
7S-fine
(
FIN
)
P
olish turbine
e
n
g
ine component
s
EXL Deburring Wheel,
8
S
-fine
(
FIN
)
EXL Deburring Wheel,
9
S
-fine
(
FIN
)
L
ight Deburring Wheel,
7
S
-fine
(
FIN
)
Aluminum,
C
o
pp
er,
B
rass (
S
oft Metals)
P
re-p
l
at
i
ng po
li
s
h
Li
g
h
t
D
e
b
urr
i
ng
Wh
ee
l
,
7S-fine (FIN)
EXL
D
e
b
urr
i
ng
Wh
ee
l
,
9S-fine (FIN)
General Purpose Wheel,
6
S-very fine (VFN
)
Po
li
s
h
b
r
ass
me
d
a
lli
ons
Li
g
ht Deburrin
g
Wheel,
7S-fine
(
FIN
)
EXL Deburrin
g
Wheel,
8
S-fine
(
FIN
)
L
i
g
ht Deburrin
g
Wheel,
6
S-fine
(
FIN
)
P
olish name
p
late
s
Light Deburring Wheel,
7
S
-fine
(
FIN
)
EXL Deburring Wheel,
8S
-fine
(
FIN
)
L
ight Deburring Wheel,
6S
-fine
(
FIN
)
P
o
li
s
h
j
ewe
l
r
y
Li
g
h
t
D
e
b
urr
i
ng
Wh
ee
l
,
6
S-fine (FIN)
EXL
D
e
b
urr
i
ng
Wh
ee
l
,
8
S-fine (FIN)
B
u
ff
and Polish Wheel,*
s
oft densit
y
O
ther — Com
p
os
os
it
it
es
es
, ,
Pl
Pl
as
ti
cs
s
,
Gl
Gl
as
as
s,
s
e
e
tc
tc
.
Po
Po
li
li
sh
sh
b
b
ev
ev
el
el
e
e
d
g
es
of
f
g
lass
G
ene
ra
r
l Pu
rp
p
os
os
e
e
Wh
Wh
ee
e
l,
6
A-v
er
r
y
y
f
fi
ne
(
VF
N)
Li
g
ht Deburrin
g
Wheel,
8
S-fine
(
FIN
)
G
eneral Pu
rp
p
ose Wheel,
6S
6S
-s
-s
up
up
er
er
f
f
in
in
e
e
(S
(S
FN
FN
)
)
A=
A=
A=
A=
Al
Al
um
um
um
um
in
i
i
u
m
O
xi
de
S
=
S
ili
co
n
Ca
r
b
i
de
*Bu
Bu
u
u
ff ff
ff
ff
and
andandand
po
po
po
po
lis
lis
l
l
h wheels are non-a
bra
a
siv
siv
s
e u
e u
e u
nit
nit
nit
nit
izeize
ize
ize
d wd w
d w
d w
hee
hee
hee
hee
ls
ls
ls
ls
d
des
des
des
i
g
ned to wor
k w
w
ith compo
und
und
s.
s
s
5
Convolute / Molded Wheels
Scotch-Brite Wheels for Finishing
Less
Aggressive
More
Aggressive
Finishing
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Pre-plating finish on
hand tools
EXL Deburring Wheel,
9S-fine (FIN)
Cut and Polish Wheel,
7A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Decorative satin finish Metal Finishing Wheel,
5A-medium (MED)
Metal Finishing Wheel,
6A-coarse (CRS)
Multi-Finishing Wheel,
2S-fine (FIN)
Gun barrel finish Cut and Polish Wheel,
5A-fine (FIN)
Cut and Polish Wheel,
5A-medium (MED)
Cut and Polish Wheel,
7A-very fine (VFN)
Pre-plating finish EXL Deburring Wheel,
8S-fine (FIN)
Cut and Polish Wheel,
5A-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN)
Stainless Steel,
Titanium
(Nickel Alloys)
#3 Finish Multi-Finishing Wheel,
2S-coarse (CRS)
Metal Finishing Wheel,
5A-coarse (CRS)
Metal Finishing Wheel,
5A-medium (MED)
#4 Finish Multi-Finishing Wheel,
2S-medium (MED)
Metal Finishing Wheel,
5A-medium (MED)
Multi-Finishing Wheel,
2S-fine (FIN)
Satin finish on cutlery Metal Finishing Wheel,
5A-medium (MED)
Metal Finishing Wheel,
5A-coarse (CRS)
Multi-Finishing Wheel,
2S-fine (FIN)
Pre-buff finish Light Deburring Wheel,
7S-fine (FIN)
Cut and Polish Wheel,
5A-fine (FIN)
General Purpose Wheel,
5A-very fine (VFN)
Aluminum, Copper,
Brass (Soft Metals)
Decorative finish for
builders hardware
Metal Finishing Wheel,
5A-medium (MED)
Cut and Polish Wheel,
7A-medium (MED)
Light Deburring Wheel,
7S-fine (FIN)
Final finish on aluminum Multi-Finishing Wheel,
2S-medium (MED)
Metal Finishing Wheel,
5A-coarse (CRS)
Multi-Finishing Wheel,
2S-fine (FIN)
Pre-buff and
pre-plate finish
Light Deburring Wheel,
7S-fine (FIN)
EXL Deburring Wheel,
9S-fine (FIN)
General Purpose Wheel,
5A-very fine (VFN)
Other — Composites,
Plastics, Glass, etc.
Satin finish on plastics Multi-Finishing Wheel,
2S-medium (MED)
Metal Finishing Wheel,
5A-medium (MED)
Light Deburring Wheel,
6S-fine (FIN)
A= Aluminum Oxide S=Silicon Carbide
5
hand
tools
9S
-
fine
(FIN)
7A
-
medium
(MED)
8S
-
fine
(FIN
)
D
ecorative satin
f
inish
M
eta
l
Fi
n
i
s
hi
ng
Wh
ee
l
,
5A-medium (MED
)
M
eta
l
Fi
n
i
s
hi
ng
Wh
ee
l
,
6A-coarse (
C
R
S
)
M
u
l
t
i
-
Fi
n
i
s
hi
ng
Wh
ee
l
,
2
S
-fine (FIN)
Gu
n
ba
rr
e
l fini
s
h
C
ut and Polish Wheel
,
5A-
f
ine
(
FIN
)
C
ut and Polish Wheel
,
5A
-me
di
um
(MED)
C
ut and Polish Wheel
,
7
A-very
f
ine
(
VFN
)
P
re-plating finish EXL Deburring Wheel,
8S
-fine
(
FIN
)
C
ut and Polish Wheel,
5
A-
f
ine
(
FIN
)
Light Deburring Wheel,
7S
-fine
(
FIN
)
S
tainless
S
teel,
Titanium
(N
i
ckel Allo
y
s)
#
3
Fi
n
i
s
h
M
u
l
t
i
-
Fi
n
i
s
hi
ng
Wh
ee
l
,
2S-coarse (CRS)
M
eta
l
Fi
n
i
s
hi
ng
Wh
ee
l
,
5
A-coarse (CRS)
M
eta
l
Fi
n
i
s
hi
ng
Wh
ee
l
,
5
A
-me
di
um
(MED)
#
4 Fini
s
hMulti-Finishin
g
Wheel,
2S-medium
(
MED
)
M
etal Finishin
g
Wheel,
5A
-me
di
um
(M
ED
)
Multi-Finishin
g
Wheel,
2S-fine
(
FIN
)
S
atin finish on cutlery Metal Finishing Wheel,
5A-medium
(
MED
)
M
etal Finishing Wheel,
5
A-coarse
(C
R
S)
Multi-Finishing Wheel,
2
S
-fine
(
FIN
)
P
re-bu
ff
f
inish
Li
g
h
t
D
e
b
urr
i
ng
Wh
ee
l
,
7
S-fine (FIN)
C
ut and Polish Wheel,
5
A-fine (FIN
)
General Purpose Wheel,
5A-very fine (VFN
)
Aluminum, Co
pp
er,
Brass
(S
oft Metals
)
Deco
r
a
tiv
e
f
ini
s
h
fo
r
b
u
ild
ers
h
ar
d
ware
Metal Finishin
g
Wheel,
5
A
-me
di
um
(MED)
C
ut and Polish Wheel
,
7
A
-me
di
um
(MED)
Li
g
ht Deburrin
g
Wheel,
7
S-fine
(
FIN
)
F
in
a
l fini
s
h
o
n
a
l
u
min
u
m Multi-Finishing Wheel,
2
S
-medium
(
MED
)
M
etal Finishing Wheel,
5
A-coarse
(C
R
S)
Multi-Finishing Wheel,
2
S
-fine
(
FIN
)
P
re-bu
ff
and
pre-plate finish
Li
g
h
t
D
e
b
urr
i
ng
Wh
ee
l
,
7
S-fine (FIN)
EXL
D
e
b
urr
i
ng
Wh
ee
l
,
9S-fine (FIN
)
General Purpose Wheel,
5A-very fine (VFN
)
Ot
Ot
he
he
r
r
Co
mp
os
os
it
it
es
es
,
,
Pl
Pl
as
as
ti
ti
cs
cs
, ,
Gl
Gl
as
as
s,
s
e
e
tc
tc
.
.
Sa
Sa
ti
ti
n
n
fi
ni
ni
sh
sh
o
o
n
n
pl
pl
as
as
ti
ti
cs
cs
Mu
Mu
lt
lt
i
i-
Fi
Fi
ni
ni
sh
sh
in
in
g
g
Wh
Wh
ee
ee
l
l,
2S-medium
(
MED
)
Me
Me
ta
ta
l
l
Fi
Fi
ni
ni
sh
sh
in
in
g
g
Wh
Wh
ee
ee
l
l,
5A
-me
di
um
(MED)
Li
Li
gh
gh
t
t
De
De
bu
bu
rr
rr
in
in
g
g
Wh
Wh
ee
ee
l,
l,
6S
S
-f
f
in
in
e e
(F(F
ININ
)
)
A=
A=A=A=
Al
Al
Al
Al
umum
u
in
i
u
m
O
xi
xi
xi
i
de
dede
de
S
S
S
S
=S
=S
=S
=S
il
il
il
il
ic
icic
ic
on
on
on
on
C
C
C
C
ar
ar
ar
ar
b
i
de
6
6
Scotch-Brite Wheels for Blending
Convolute / Molded Wheels
Less
Aggressive
More
Aggressive
Blending
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Blend 80 grit scratch Cut and Polish Wheel,
5A-medium (MED)
CPM Wheel,
5A-coarse (CRS)
Cut and Polish Wheel,
5A-fine (FIN)
Blend steel tubing prior
to plating
Metal Finishing Wheel,
5A-medium (MED)
CPM Wheel,
5A-medium (MED)
Cut and Polish Wheel
5A-fine (FIN)
Blend compressor shafts Cut and Polish Wheel
7A-fine (FIN)
Cut and Polish Wheel,
7A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Blend 60 grit scratch Cut and Polish Wheel,
7A-coarse (CRS)
CPM Wheel,
9A-coarse (CRS)
Cut and Polish Wheel,
5A-fine (FIN)
Stainless Steel,
Titanium
(Nickel Alloys)
Refine turbine blades SF Finishing and
Deburring Wheel,
8S-medium (MED)
Cut and Polish Wheel
5A-fine (FIN)
EXL Deburring Wheel,
8S-fine (FIN)
Remove parting lines
on blades
EXL Deburring Wheel,
9S-fine (FIN)
EXL Deburring Wheel,
8A-medium (MED)
EXL Deburring Wheel,
8S-fine (FIN)
Blend surgical
instruments
EXL Deburring Wheel,
9S-fine (FIN)
Cut and Polish Wheel,
5A-fine (FIN)
Light Deburring Wheel,
7S-fine (FIN),
Blend 100 grit scratch Metal Finishing Wheel,
5A-medium (MED)
Cut and Polish Wheel
7A-medium (MED)
Cut and Polish Wheel,
5A-fine (FIN)
Aluminum, Copper,
Brass (Soft Metals)
Blend 120 grit scratch Cut and Polish Wheel,
5A-fine (FIN)
Cut and Polish Wheel,
7A-fine (FIN)
Multi-Finishing Wheel,
2S-fine (FIN)
Remove small
surface imperfections
Metal Finishing Wheel,
5A-medium (MED)
Cut and Polish Wheel,
7A-medium (MED)
Multi-Finishing Wheel,
2S-fine (FIN)
Blend prior to plating Multi-Finishing Wheel,
2S-fine (FIN)
Cut and Polish Wheel
5A-fine (FIN),
Light Deburring Wheel,
7S-fine (FIN)
Other — Composites,
Plastics, Glass, etc.
Mold flash removal Cut and Polish Wheel,
7A-fine (FIN)
Cut and Polish Wheel,
7A-medium (MED)
Light Deburring Wheel,
6S-fine (FIN)
A= Aluminum Oxide S=Silicon Carbide
7
7
7
Scotch-Brite
EXL, EX2 and EX3 Deburring Wheels
The EXL convolute wheels are especially well suited for a broad
range of deburring and finishing needs and are designed for top
performance and value on a variety of applications. This wheel
family contains a unique resin system, which helps minimize
smearing. EXL wheels can demonstrate performance on
stainless steel, titanium, and high nickel alloys.
Product Name Density Mineral Type Grade
EXL Deburring
Wheel
8, 9 Silicon Carbide FIN
Hard8 Silicon Carbide MED
8 Aluminum Oxide MED
EX2 Deburring
Wheel
8, 9 Silicon Carbide FIN
Harder8 Silicon Carbide MED
8 Aluminum Oxide MED
EX3 Deburring
Wheel
8, 9 Silicon Carbide FIN
Hardest8 Silicon Carbide MED
8 Aluminum Oxide MED
Diameters: 4" minimum
24" maximum
Widths: 3/8"–36" in 4, 6, 8" diameters
1/2"–36" in 10, 12" diameters
3/4"–36" in 14"–24" diameters
Typical
Applications:
• Cutlery — deburring and edge radius
Turbine blades — blending, finishing, deburring
• Gun barrels — polishing
• Golf club heads — polishing, finishing
• General use deburring
Some additional sizes may be available by special request.
See pages 23–24 for recommended flanges/accessories.
Product Name Density Mineral Type Grade
Light Deburring Wheel 6, 7, 8 Silicon Carbide FIN
Diameters: 4" minimum
24" maximum
Widths: 6 density 1/2"–36" in 4"–12" diameters
3/4"–36" in 12"–24" diameters
7, 8 density
3/8"–36" in 4, 6, 8" diameters
1/2"–36" in 10, 12" diameters
3/4"–36" in 14"–24" diameters
Typical
Applications:
• Deburring of fine threads
• Mold and die polishing
• Finishing prior to buffing
Conditioning surface prior to welding on soft metal
See pages 23–24 for recommended flanges/accessories.
Convolute / Molded Wheels
Scotch-Brite
Light Deburring Wheel
The Light Deburring Wheel is designed to provide a clean and
economical system for removing fi ne burrs while providing a
highly polished fi nish. Used for fi ne deburring, polishing and
nishing because of their conformability, Light Deburring Wheels
will maintain critical tolerances while still providing a fi ne
polished fi nish.
See page 1 for convolute vs. unitized
8
8
Scotch-Brite
SST Deburring Wheel
Scotch-Brite
SF Finishing and Deburring Wheel
SST Deburring Wheels are designed for deburring on most
stainless steel, titanium and other demanding alloys. Burrs from
drilling, stamping, punching and other machining operations can
easily be removed with SST wheels.
Unlike some higher density products, SST wheels are somewhat
softer and more conformable, making them ideal for use on more
intricate shapes and contours.
SST wheels are used extensively in the aerospace industry for
deburring and fi nishing parts, and for fi nishing cast and threaded
products used in medical and surgical applications.
The SF Wheel is loaded with mineral that is smear resistant yet
durable when exposed to metal burrs. This results in a wheel
that delivers excellent fi nishes while still handling burrs. In some
applications, this wheel can handle three surface modifying
elements — combining fi nishing, deburring and blending into
one operation.
The SF wheel’s unique resin construction allows it to run
smooth and resist chunking while requiring less frequent
dressing. It is an excellent option when fi nish is critical on
deburring applications.
Product Name Density Mineral Type Grade
SF Finishing and
Deburring Wheel
8, 11 Silicon Carbide FIN
8, 11 Silicon Carbide MED
Diameters: 4" minimum
24" maximum
Widths: 3/8"–36" in 4, 6, 8" diameters
1/2"–36" in 10, 12" diameters
3/4"–36" in 14"–24" diameters
Typical
Applications:
• General deburring of machined and formed parts
• Deburring and finishing turbine blades
• Gun barrel polishing
• Golf club finishing
• Medical component deburring and finishing
See pages 23–24 for recommended flanges/accessories.
Product Name Density Mineral Type Grade
SST Deburring Wheel 7 Aluminum Oxide FIN
8 Silicon Carbide FIN
Diameters: 4" minimum
24" maximum
Widths: 3/8"–36" in 4, 6, 8" diameters
1/2"–36" in 10, 12" diameters
3/4"–36" in 14"–24" diameters
Typical
Applications:
• Deburring and finishing turbine blades and vanes
• OD polishing roller bearings
• Polishing/blending of surgical instruments
• Deburring of aluminum die cast flashing
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Convolute / Molded Wheels
9
9
9
9
9
9
9
Scotch-Brite
Cut and Polish / CPM Wheels
Cut and Polish / CPM Wheels are heavy duty wheels for more
aggressive blending and fi nishing. These long lasting wheels
perform well on tough blending and fi nishing applications such
as removing surface defects, coarse grindlines, blending forging
marks and machining mismatches while leaving a uniform
grain fi nish.
Cut and Polish / CPM Wheels are very similar but have subtle
variations. The CPM Wheel is slightly harder and more aggressive
in demanding applications.
Both wheels can demonstrate value in a variety of applications,
and are especially well suited for centerless fi nishing.
Product Name Density Mineral Type Grade
Cut and Polish Wheel 5 Aluminum Oxide FIN
7 Aluminum Oxide VFN, FIN, MED. CRS
CPM Wheel 5 Aluminum Oxide FIN, MED, CRS, XCS
7 Aluminum Oxide FIN, MED, CRS, XCS
9 Aluminum Oxide FIN, MED, CRS, XCS
Diameters: 4" minimum
24" maximum
Widths: 3/8"–36" in 4, 6, 8" diameters
1/2"–36" in 10, 12" diameters
3/4"–36" in 14"–24" diameters
Typical
Applications:
• Blending of abrasive grind lines
• Centerless finishing of machined parts
• Conditioning of machined compressor shafts
• Surface finishing of hand tools prior to plating
See pages 23–24 for recommended flanges/accessories.
Scotch-Brite
Metal Finishing Wheel
Highly conformable Metal Finishing Wheels are designed to apply
uniform and consistent satin/antique fi nishes. They are used
effectively to blend and match #3 or #4 mill fi nishes on stainless
steel and to create brushed or satin fi nishes on cutlery.
On softer metals such as aluminum, copper and brass, they are
used to blend out minor surface imperfections and handling
marks while providing the desired decorative fi nish.
Product Name Density Mineral Type Grade
Metal Finishing Wheel 4, 5, 6 Aluminum Oxide CRS
4, 5, 6 Aluminum Oxide MED
Diameters: 4" minimum
18" maximum
Widths: 3/4"–36" 4 density in 4"–18" diameters
1/2"–36" 5, 6 density in 4"–2" diameters
3/4"–36" 5, 6 density in 14"–18" diameters
Typical
Applications:
• Stainless steel blending and finishing
• Finishing of aluminum molding
• Satin finishing of builders hardware
• Satin finishing of cutlery
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Convolute / Molded Wheels
10
10
Scotch-Brite
Multi-Finishing Wheel
Scotch-Brite
General Purpose Wheel
Multi-Finishing Wheels are highly conformable, soft wheels that
create uniform and attractive fi nal fi nishes on ferrous and
non-ferrous metals. They are tough enough to fi nish edges and
welds and soft enough to apply a fi nal fi nish on large surfaces.
The load resistant open web construction of these wheels
removes surface contamination and dirt without re-depositing
contaminates onto the work piece. The Silicon Carbide mineral
contained in this wheel offers a unique bright surface that is
often desired by stainless steel fabricators.
General Purpose Wheels offer the greatest selection of grades,
densities and mineral types. They are an excellent starting point
when the application calls for fi ne fi nishing or cleaning.
Like all Scotch-Brite products they produce consistent results
and can be easier to use than buffs and compounds and other
nishing abrasives.
Product Name Density Mineral Type Grade
Multi-Finishing Wheel 2 Silicon Carbide FIN, MED, CRS
3 Silicon Carbide FIN, MED, CRS
4 Silicon Carbide FIN, MED, CRS
Diameters: 4" minimum
16" maximum
Widths: 1"–36" in 4"–16" diameters
Typical
Applications:
• Cleaning of composite parts
Final finish of aluminum extrusions and
stainless steel
• Finishing/blending
• Finishing hardware and cutlery
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Product Name Density Mineral Type Grade
General Purpose Wheel 4, 5, 6 Aluminum Oxide VFN
4, 5, 6 Aluminum Oxide FIN
4, 5, 6 Aluminum Oxide MED
4, 5, 6 Silicon Carbide ULF
4, 5, 6 Silicon Carbide SFN
4, 5, 6 Silicon Carbide VFN
4, 5, 6 Silicon Carbide FIN
4, 5, 6 Silicon Carbide MED
Diameters: 4" minimum
24" maximum
Widths: 3/4"–24" 4 density in 4"–24" diameters
3/8"–24" 5, 6 density in 4, 6, 8" diameters
1/2"–24" 5, 6 density in 10, 12" diameters
1/2"–24" 5, 6 density in 10, 12" diameters
3/4"–24" 5, 6 density in 14"–24" diameters
Typical
Applications:
• Polishing jewelry prior to plating
• Selective polish on nameplates
• Polish bevel edge of furniture glass
• Light oxide removal
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Convolute / Molded Wheels
11
11
11
1
Scotch-Brite
Clean and Strip Rim Wheel
An extra coarse open web in a layered construction makes this
Scotch-Brite Clean and Strip Rim Wheel a perfect choice for the
removal of rust, oxides and light scale. They can also show value
in applications requiring a bright, coarse-grain fi nish.
These wheels can be adapted to a broad range of applications
including bench grinders and automatic fi nishing equipment.
Product Name Density Mineral Type Grade
Clean and Strip
Rim Wheel 7 Silicon Carbide XCS
Diameters: 8" minimum
16" maximum
Widths: 1"–4" in 8"–16" diameters
Typical
Applications:
• Coarse grain finishing
• Centerless finishing
• Rust removal
• Light coating removal
See pages 23–24 for recommended flanges/accessories.
Scotch-Brite
Woodworking Wheel
This wheel is a custom designed non-woven abrasive product
for use on white wood sanding. An advantage of this wheel is the
open construction and the use of garnet mineral, reducing the
potential for part burning. The Scotch-Brite Woodworking Wheel
may be used in its straight form or shaped to
various profi les.
Product Name Density Mineral Type Grade
Woodworking Wheel 5 Garnet MED
Diameters: 6" minimum
8" maximum
Widths: 3/4" minimum
36" maximum
Typical
Applications:
• Profile sanding
• Defuzzing
See pages 23–24 for recommended flanges/accessories.
Convolute / Molded Wheels
12
1212
12
12
3M XR Metalworking Wheel
The 3M XR Metalworking Wheel is loaded with mineral and
is designed for demanding applications such as removing
sharp burrs that may drastically reduce the life of a non-woven
abrasive or rubber bonded wheel.
This wheel retains its shape when dressed, allowing access to
tight areas and right angles. Unlike a bonded wheel, the XR won’t
grab the workpiece, thus requiring less pressure and reducing
operator fatigue. It also includes a grinding aid to increase cut
rate and run cooler.
The combination of 3M’s molded technology and grinding aid
helps the XR last longer, which can help save time and money.
Product Name Density Mineral Type Grade
XR Metalworking
Wheel HA 805 Hard Aluminum Oxide CRS
XR Metalworking
Wheel HA 1208 Hard Aluminum Oxide MED
XR Metalworking
Wheel HA 2410 Hard Aluminum Oxide FIN
Diameters: 6", 8", 12"
Widths: 1/2"–2"
Typical
Applications:
• Deburring stainless steel and titanium
• Blending milling marks and grindlines
• Removing light scale
• Removing parting lines
Applying a radius to parts
See pages 23–24 for recommended flanges/accessories.
Convolute / Molded Wheels
13
1313
13
13
Unitized Wheels
Scotch-Brite Unitized Wheel performance differences can be attributed to mineral (aggressiveness) and
density (hardness). The combination of these two characteristics and subtle variations determine if the wheel
will cut more aggressively or will be more durable and less conformable (See depiction below).
More
Aggressive
Less
Aggressive
HarderSofter
Legend
BP Buff and Polish Unitized Wheel GP General Purpose Unitized Wheel
CP Cut and Polish Unitized Wheel MF Metal Finishing Unitized Wheel
CS Clean and Strip Unitized Wheel SST SST Unitized Wheel
EXL EXL Unitized Wheel
* No mineral: Use with abrasive compound.
14
14
14
Unitized Wheels
Scotch-Brite Wheels for Deburring
HarderSofter
Deburring
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Deburr machined parts EXL Unitized Wheel,
6A-medium (MED)
EXL Unitized Wheel,
8A-coarse (CRS)
EXL Unitized Wheel,
4A-fine (FIN)
Deburr keyways EXL Unitized Wheel,
2S-fine (FIN)
EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
2S-very fine (VFN)
Radius stamped parts EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
6A-medium (MED)
EXL Unitized Wheel,
4S-fine (FIN)
Remove laser cut burrs EXL Unitized Wheel,
8A-medium (MED)
EXL Unitized Wheel,
8A-coarse (CRS)
EXL Unitized Wheel,
6A-medium (MED)
Stainless Steel,
Titanium
(Nickel Alloys)
Deburr and radius root of
turbine blades
EXL Unitized Wheel,
2S-fine (FIN)
SST Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
2S-very fine (VFN)
Deburr piston rings EXL Unitized Wheel,
4S-fine (FIN)
EXL Unitized Wheel,
6A-medium (MED)
EXL Unitized Wheel,
3S-fine (FIN)
Deburr threaded parts EXL Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
4S-fine (FIN)
EXL Unitized Wheel,
2S-fine (FIN)
Radius sharp edges of
stainless steel parts
EXL Unitized Wheel,
6A-medium (MED)
EXL Unitized Wheel,
8A-medium (MED)
EXL Unitized Wheel,
4A-fine (FIN)
Aluminum, Copper,
Brass (Soft Metals)
Remove aluminum
flashing
EXL Unitized Wheel,
6A-medium (MED)
EXL Unitized Wheel,
8A-coarse (CRS)
EXL Unitized Wheel,
2A-medium (MED)
Deburr intricate cast parts EXL Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
4S-fine (FIN)
EXL Unitized Wheel,
2S-fine (FIN)
Other — Composites,
Plastics, Glass, etc.
Deburr plastic EXL Unitized Wheel,
4S-fine (FIN)
EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
2S-fine (FIN)
A= Aluminum Oxide S=Silicon Carbide
15
15151515
Unitized Wheels
Scotch-Brite Wheels for Polishing, Finishing and Blending
More
Aggressive
Less
Aggressive
Polishing, Finishing
and Blending
Applications Starting Point
Alternatives:
More Aggressive Less Aggressive
Carbon Steels Polish roller bearings EXL Unitized Wheel,
3S-fine (FIN)
Cut and Polish Unitized
Wheel, 5A-fine (FIN)
EXL Unitized Wheel,
2S-fine (FIN)
Polish molds and dies EXL Unitized Wheel,
2S-fine (FIN)
EXL Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
2S-very fine (VFN)
Decorative satin finish Metal Finishing Unitized
Wheel, 5A-medium (MED)
Metal Finishing Unitized
Wheel, 6A-coarse (CRS)
Cut and Polish Unitized
Wheel, 5A-fine (FIN)
Pre-plate finish EXL Unitized Wheel,
2S-fine (FIN)
Cut and Polish Unitized
Wheel, 5A-fine (FIN)
EXL Unitized Wheel,
2S-very fine (VFN)
Blend 80-100 grit
grind lines
Cut and Polish Unitized
Wheel, 7A-medium (MED)
EXL Unitized Wheel,
8A-coarse (CRS)
Cut and Polish Unitized
Wheel, 5A-fine (FIN)
Stainless Steel,
Titanium
(Nickel Alloys)
Polish medical devices EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
6A-fine (FIN)
EXL Unitized Wheel,
2S-fine (FIN)
Polish turbine
engine components
EXL Unitized Wheel,
2S-fine (FIN)
EXL Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
2S-very fine (VFN)
Near mirror finish EXL Unitized Wheel,
2S-very fine (VFN)
EXL Unitized Wheel,
2S-fine (FIN)
Buff and Polish
Unitized Wheel*
Blend parting lines from
turbine blades
EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
6A-fine (FIN)
EXL Unitized Wheel,
3S-fine (FIN)
Aluminum, Copper,
Brass (Soft Metals)
Pre-plate polish EXL Unitized Wheel,
2S-fine (FIN)
EXL Unitized Wheel,
4S-fine (FIN)
EXL Unitized Wheel,
2S-very fine (VFN)
Polish jewelry plates EXL Unitized Wheel,
2S-fine (FIN)
EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
2S-very fine (VFN)
Decorative finish on
builders hardware
Metal Finishing Unitized
Wheel, 5A-medium (MED)
Cut and Polish
Unitized Wheel,
7A-medium (MED)
EXL Unitized Wheel,
2S-fine (FIN)
Blend light
imperfections
Metal Finishing Unitized
Wheel, 5A-medium (MED)
Cut and Polish
Unitized Wheel,
7A-medium (MED)
EXL Unitized Wheel,
2A-medium (MED)
Other — Composites,
Plastics, Glass, etc.
Remove flash from
plastic parts
EXL Unitized Wheel,
3S-fine (FIN)
EXL Unitized Wheel,
2A-medium (MED)
EXL Unitized Wheel,
2S-fine (FIN)
A= Aluminum Oxide S=Silicon Carbide
*Buff and polish wheels are non-abrasive unitized wheels designed to work with compounds.
16
16
Scotch-Brite
EXL Unitized Wheel
Scotch-Brite
Roloc EXL Unitized Wheel
EXL Unitized Wheels products are an excellent choice for
deburring and polishing of all metal alloys as well as many
plastics and composites. Similar to the EXL Convolute Wheels
(EXL, EX2, EX3 Deburring Wheels) they resist smearing and
minimize heat buildup on the workpiece.
There are a wide variety of densities and grades available
starting from a very soft 2 density for applications requiring a
conformable product extending to a hard, aggressive 8 density
for maximum cut and durability.
Scotch-Brite Roloc EXL Unitized Wheels are strong and
effi cient for edge deburring and fi nishing. They perform well in a
variety of metal working applications and machined parts where
close tolerances are important.
Changing wheels is quick and easy with Roloc TR,
Roloc TS, or Roloc + holding systems. They allow for use of
both the edge and surface of the wheel without interruption of
mounting hardware. The mounting system is interchangeable
with Scotch-Brite Surface Conditioning Discs and Coated
Abrasive Discs.
Product Name Density Mineral Type Grade
EXL Unitized Wheel 2 Silicon Carbide VFN
2, 3, 4, 6 Silicon Carbide FIN
4, 6 Aluminum Oxide FIN
2, 6, 8 Aluminum Oxide MED
8 Aluminum Oxide CRS
2, 4, 6, 8 Aluminum Oxide XCS
Product Name Density Mineral Type Grade
Roloc EXL
Unitized Wheel
2, 3, 6 Silicon Carbide FIN
2, 6, 8 Aluminum Oxide MED
8 Aluminum Oxide CRS
2, 4, 6, 8 Aluminum Oxide XCS
Diameters: 1/2" minimum
14" maximum
Widths: 3, 6, 8 density in 1/8" minimum
2, 4 density in 1/4" minimum
1" maximum all diameters
Typical
Applications:
• Weld cleaning
• Finishing threaded parts
Turbine blade polishing
• Metal stampings
See pages 23–24 for recommended flanges/accessories.
Diameters: 2" and 3"
Widths: N/A
Typical
Applications:
• Weld polishing
• Deburring aircraft parts
Blending and finishing on a variety of metals,
plastics and composites
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Unitized Wheels
17
1
7
Unitized Wheels
Scotch-Brite
SST Unitized Wheel
SST Unitized Wheels offer the same deburring and fi nishing
advantages as SST Convolute Wheels (SST Deburring Wheels;
refer to page 8). The unitized version of the SST wheel is
recommended when the application requires very narrow widths
and/or small diameter ranges.
SST Unitized Wheels run well on equipment such as bench
motors, oor lathes and portable power tools.
Product Name Density Mineral Type Grade
SST Unitized Wheel 3, 5, 7 Silicon Carbide FIN
3, 5, 7 Aluminum Oxide FIN
Diameters: 1/2" minimum
14" maximum
Widths: 3 density in 1/4"–1"
5, 7 density in 1/8"–1"
1" maximum all diameters
Typical
Applications:
Deburring and finishing of aircraft
engine components
Finishing of parts used in medical and
surgical instruments
• Mold and die polishing
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Scotch-Brite
Cut and Polish Unitized Wheel
Cut and Polish Unitized Wheels are long lasting and aggressive
for heavy duty blending and fi nishing with uniform results.
The layered “unitized” construction of this wheel provides an
excellent starting point for jobs requiring the availability of small
diameters and narrow widths.
These wheels show value in the industry as they can often be
used to replace many conventional abrasive products such as
rubber bonded wheels and small set-up wheels.
Product Name Density Mineral Type Grade
Cut and Polish
Unitized Wheel*
5 Aluminum Oxide FIN
7, 9 Aluminum Oxide MED, CRS
7, 9 Silicon Carbide MED
Diameters: 1/2" minimum
14" maximum
Widths: 5, 7 density in 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1"
9 density in 1/8", 1/4", 3/8", 1/2"
1" maximum all diameters
Typical
Applications:
• Parting line removal
• Pipe thread deburring
• Heavy-duty deburring of aerospace components
See pages 23–24 for recommended flanges/accessories.
*Also available in Roloc
See page 1 for convolute vs. unitized
18
1818
Scotch-Brite Clean and Strip
Unitized Wheel / Cup Wheel
Scotch-Brite Clean and Strip Unitized Wheel products are
excellent for heavy duty cleaning applications.
The extra coarse silicon carbide mineral combined with a
tough synthetic web is perfect for removing scale, rust, surface
contaminants, paints and coatings. They are also well suited for
removing weld discoloration and splatter.
The open construction and the aggressive properties provide
a smooth running wheel that resists loading when removing
soft coatings.
Product Name Density Mineral Type Grade
Clean and Strip Unitized Wheel 7 Silicon Carbide XCS
Clean and Strip Cup Wheel 7 Silicon Carbide XCS
Diameters: Unitized Wheels: 1"–14"
Cup Wheels: 3" (3/8"–24 threaded nut size)
4" (5/8"–11 threaded nut size)
4" (M–10 x 1.25 threaded nut size)
4" (M–10 x 1.50 threaded nut size)
4" (3/8"–24 threaded nut size)
6" (7/8"–CH threaded nut size)
Widths: Unitized Wheels: 1/4"–1"
Cup Wheels: N/A
Maximum
Operating
Speeds (RPM)
Unitized Wheels: See chart on page 21
Cup Wheels: 3" dia. — 18,100 RPM
4" dia. — 12,100 RPM
6" dia. — 7,000 RPM
Typical
Applications:
• Rust removal
• Coating removal
• Gasket removal
• Light scale removal
Bright finishing–coarse scratch pattern
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Scotch-Brite
Metal Finishing Unitized Wheel
Metal Finishing Unitized Wheels offer the same unique fi nishing
capability of Metal Finishing Convolute wheels (Metal Finishing
Wheels; refer to page 9). These wheels are available in small
diameters and narrow widths. In essence, they provide durability
and value for fi nishing of parts that are too narrow, tight or small
to fi nish effi ciently with wider width wheels.
Product Name Density Mineral Type Grade
Metal Finishing
Unitized Wheel
5 Aluminum Oxide MED
6 Aluminum Oxide CRS
Diameters: 1" minimum
14" maximum
Widths: 1/4", 3/8", 1/2", 1"
1" maximum all diameters
Typical
Applications:
Weld cleaning and blending in stainless steel tank
• Manufacturing finishing of builders hardware
• Finishing/blending builders hardware
• Finishing prior to buffing
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Unitized Wheels
191
9
Scotch-Brite
General Purpose Unitized Wheel
Similar to the General Purpose convolute wheel, this unitized
wheel offers a wide range of grades and densities. Designed for
applications requiring fi ne fi nishes or light cleaning, the General
Purpose Unitized Wheel also tends to be a good starting point
when the part shape or size calls for small diameters or narrow
width product.
Product Name Density Mineral Type Grade
General Purpose
Unitized Wheel
3, 5, 7 Silicon Carbide ULF
3, 5, 7 Silicon Carbide SFN
3, 5, 7 Aluminum Oxide and
Silicon Carbide
VFN
3, 5, 7 Aluminum Oxide and
Silicon Carbide
FIN
3, 5, 7 Aluminum Oxide and
Silicon Carbide
MED
3, 5, 7 Aluminum Oxide CRS
Diameters: 1/2" minimum
14" maximum
Widths: 1/4", 3/8", 1/2", 5/8", 3/4", 1"
1" maximum all diameters
Typical
Applications:
• Fine thread polishing
• Mold polishing
• Jewelry polishing
• Polishing turbine blades
See pages 23–24 for recommended flanges/accessories.
See page 1 for convolute vs. unitized
Unitized Wheels
Scotch-Brite
Buff and Polish Unitized Wheel
Buff and Polish Unitized Wheels are a unitized constructed,
non-abrasive carrier for compounds used for polishing fl at
and symmetrical contoured surfaces. They can often replace
felt or leather wheels, as they hold more compound with
even distribution allowing for faster cut and less frequent
compound application.
Product Name Density Mineral Type Grade
Buff and Polish
Unitized Wheel
3, 5, 7 N/A N/A Use with
compound
Diameters: 1/2" minimum
14" maximum
Widths: 1/8"–1"
1" maximum all diameters
Typical
Applications:
• Jewelry polishing
• Surgical instruments
• Honing and deburring of knife edges
• Fiber optic ends
• Medical Instruments
See pages 23–24 for recommended flanges/accessories.
202
0
Surface Speed Conversion Chart
RPM at
Arbor or
Spindle
Wheel Diameter
2" 4" 6" 8" 10" 12" 14" 16" 18"
Surface Speed in Feet Per Minute (SFPM)
100 52 104 157 207 260 314 364 419 471
200 105 208 314 414 520 628 728 838 942
300 157 312 471 621 780 942 1092 1257 1414
400 209 416 628 828 1040 1256 1456 1676 1885
500 262 520 785 1045 1310 1570 1820 2094 2356
600 314 630 940 1255 1570 1885 2195 2513 2827
700 367 735 1100 1465 1835 2200 2560 2932 3299
800 419 837 1256 1675 2094 2513 2932 3351 3770
900 471 942 1413 1885 2356 2827 3298 3770 4241
1000 524 1047 1570 2094 2618 3141 3665 4189 4712
1100 576 1152 1727 2304 2880 3455 4031 4608 5184
1200 628 1256 1884 2513 3142 3769 4398 5027 5655
1300 681 1361 2042 2723 3404 4084 4764 5445 6126
1400 733 1466 2199 2932 3666 4398 5131 5864 6597
1500 785 1571 2356 3142 3927 4712 5497 6283 7069
1600 838 1675 2513 3351 4189 5026 5864 6702 7540
1700 890 1780 2670 3560 4451 5340 6230 7121 8011
1800 942 1885 2827 3770 4713 5650 6597 7540 8482
1900 995 1989 2984 3979 4975 5969 6963 7959 8954
2000 1047 2094 3141 4189 5236 6283 7330 8378 9425
2100 1100 2199 3298 4398 5498 6497 7696 8796 9896
2200 1152 2304 3455 4608 5760 6911 8063 9215 10367
2300 1204 2408 3612 4817 6022 7225 8429 9634 10839
2400 1257 2513 3770 5027 6284 7540 8796 10053 11310
2500 1309 2618 3927 5236 6545 7854 9162 10472 11781
2600 1361 2722 4084 5445 6807 8168 9529 10891 12252
2700 1414 2827 4241 5655 7069 8482 9895 11310 12723
2800 1466 2932 4398 5864 7331 8796 10262 11729 13195
2900 1518 3037 4555 6074 7592 9110 10629 12148 13666
3000 1571 3141 4712 6283 7854 9425 10996 12566 14137
3200 1676 3351 5026 6702 8378 10053 11729 13404 15080
3400 1780 3560 5340 7121 8901 10681 12462 14242 16022
3600 1885 3769 5654 7539 9425 11309 13193 15080 16965
3800 1990 3979 5969 7958 9948 11938 13927 15917 17907
4000 2094 4188 6283 8377 10472 12566 14661 16755 18850
SFPM=RPM x Diameter x π/12
Factors Affecting Performance
Product Surface Speed
Because product speed has a significant effect on performance
(cut, life, and finish), it is important to select the proper speed for
a particular operation and work piece.
Generally, low speeds are desired for generating very uniform
satin finishes, for finishing aluminum alloys without lubricants,
and for use on composite or other soft material applications.
High speeds are recommended when it is desired to remove or
blend surface imperfections and tough burrs. This high speed
will result in a faster cut along with finer finishes.
Lubricant–Coolant
Coolants, like water and some water soluble oils, reduce heat
and extend product life while providing a greater cut. In the case
of most oils or tallow lubricants, surface roughness can be
reduced. The higher viscosity lubricants produce lower surface
roughness, i.e., grease produces a finer surface finish than oil. In
automatic or semi-automatic operations, it is desirable to use
lubricants or coolants whenever possible.
Product Hardness (Density)
3M Wheels are available in a number of densities or hardnesses.
Generally, the softer products (2, 3, 4, and 5 density) are used for
decorative finishing. They will conform more readily to surface
contours along with generating a more uniform finish. The harder
products (6, 7, 8, and 9 density) are to be used for the more
difficult blending, cleaning and deburring operations.
Recommended Operating Speeds
(SFPM = Surface Feet Per Minute)
Decorative finishing 5003000 SFPM
Composites/Soft materials 1200–2700 SFPM
Deburring 5000–6500 SFPM
Blending / Polishing 6000–8000 SFPM
21
21
21
21
Convolute Wheels
Unitized Wheels
Maximum Operating Speeds (RPM)
Size
(Diameter x
Width) BP-UW CS-UW CP-UW
EXL-UW
2S, 3S
EXL-UW
2A MED,
2A XCS,
4A XCS
EXL-UW
4, 6, 8
Except
4A XCS GP-UW
ST-UW
3
ST-UW
5, 7 MF-UW
Less than 1" 40,100 40,100 40,100 35,100 30,100 40,100 35,100 40,100 40,100
1" x All 35,100 35,100 35,100 30,100 25,100 35,100 30,100 35,100 35,100 35,100
1-1/2" x All 30,100 25,100 30,100 20,100 18,100 30,100 20,100 25,100 30,100 25,100
2" x 1/4"–1/2" 24,100 20,100 22,100 16,100 16,100 22,100 16,100 20,100 22,100 18,100
2" x 3/4"–1" 24,100 20,100 22,100 16,100 14,100 22,100 16,100 18,100 22,100 18,100
2-1/2" x 1/8" 22,100 20,100 20,100 12,500 20,100 15,100
2-1/2" x 1/4" 22,100 16,100 20,100 14,100 14,100 20,100 12,500 18,100 20,100 15,100
2-1/2" x 3/8" 22,100 16,100 20,100 14,100 12,100 20,100 12,500 18,100 20,100 15,100
2-1/2" x 1/2" 22,100 16,100 18,100 14,100 12,100 18,100 12,500 18,100 18,100 15,100
2-1/2" x 3/4"–1" 22,100 16,100 18,100 12,500 10,000 18,100 12,500 15,100 18,100 15,100
3" x 1/8" 18,100 18,100 18,100 10,000 18,100 12,500
3" x 1/4" 18,100 14,100 18,100 12,100 12,100 18,100 10,000 14,100 18,100 12,500
3" x 3/8" 18,100 14,100 18,100 12,100 10,000 18,100 10,000 14,100 18,100 12,500
3" x 1/2" 18,100 14,100 15,100 10,000 10,000 15,100 10,000 12,500 15,100 12,500
3" x 3/4"–1" 18,100 14,100 15,100 10,000 9,000 15,100 10,000 12,500 15,100 12,500
4" x 1/8" 14,100 10,000 12,100 8,000 12,100 9,000
4" x 1/4"–1/2" 14,100 10,000 12,100 8,500 8,000 12,100 8,000 10,000 12,100 9,000
4" x 3/4"–1" 14,100 10,000 12,100 8,000 7,000 12,100 8,000 9,000 12,100 9,000
5" x All 12,100 8,000 9,000 6,000 5,500 9,000 6,000 7,500 9,000 7,500
6" x All 10,000 7,000 7,500 5,000 4,500 7,500 5,000 6,000 7,500 6,000
7" x All 8,000 6,000 6,000 4,500 4,000 6,000 4,500 5,000 6,000 5,000
8" x All 7,000 5,000 5,500 4,000 3,500 5,500 4,000 4,500 5,500 4,500
9" x All 6,000 4,500 5,000 3,500 3,000 5,000 3,500 4,000 5,000 4,000
10" x All 5,000 4,200 4,500 3,200 2,800 4,500 3,200 3,750 4,500 3,750
11" x All 4,500 3,800 4,000 2,900 2,500 4,000 2,900 3,400 4,000 3,400
12" x All 4,000 3,500 3,750 2,600 2,300 3,750 2,600 3,100 3,750 3,100
13" x All 3,500 3,200 3,450 2,400 2,100 3,450 2,400 2,800 3,450 2,800
14" x All 3,200 3,000 3,200 2,200 2,000 3,200 2,200 2,650 3,200 2,650
15" x All 3,000
16" x All 2,800
17" x All 2,600
18" x All 2,500
19" x All 2,300
20" x All 2,250
Identifies product with “Dual” rating and higher maximum operating speed (see page 22).
UW = Unitized Wheel
BP = Buff and Polish Unitized Wheel
CS = Clean and Strip Unitized Wheel
CP = Cut and Polish Unitized Wheel
EXL = EXL Unitized Wheel
GP = General Purpose Unitized Wheel
ST = SST Unitized Wheel
MF = Metal Finishing Unitized Wheel
Maximum Operating Speeds (RPM)
Diameter All Wheels (RPM)
4" 9,000
6" 6,000
8" 4,500
10" 3,600
12" 3,000
14" 2,550
16" 2,250
18" 2,000
20" 1,800
24" 1,500
Factors Affecting Performance
22
222222
Unitized Wheels
The following Unitized Wheels (in either 1/4" or 3/8" I.D.) have been certified to run at higher maximum
operating speeds when using the following hardware (or their equivalents) #990 or #991 Mandrel — or
used with 1-1/2" O.D. and 3/8" I.D. flat washers.
Products with “Dual” ratings and higher Maximum Operating Speeds (MOS)
Product Name Density/Grade
Size
(Diameter x Width) RPM
Clean and Strip Unitized Wheel 7S XCS 3" x 1/4" 18,100
Cutting and Polish Unitized Wheel
5A FIN 3" x 1/2"
18,100
3" x 3/4"
7A MED 3" x 1/2"
3" x 3/4"
7S MED 3" x 1/2"
3" x 3/4"
7A CRS 3" x 1/2"
5A FIN 2-1/2" x 1/2"
22,100
2-1/2" x 3/4"
7A MED 2-1/2" x 1/4"
2-1/2" x 1/2"
7S MED 2-1/2" x 1/4"
2-1/2" x 1/2"
EXL Unitized Wheel
4A FIN 3" x 1/2"
18,100
4S FIN 3" x 1/2"
6A FIN 3" x 1/2"
6S FIN 3" x 1/2"
6A MED 3" x 1/2"
8A MED 3" x 1/2"
8A CRS 3" x 1/2"
6A MED 2-1/2" x 1/2" 20,100
8A MED 2-1/2" x 1/2"
General Purpose Unitized Wheel
5A MED 3" x 1/2"
18,100
3" x 3/4"
5A FIN 3" x 1/2"
3" x 3/4"
7A FIN 3" x 1/4"
3" x 1/2"
7S FIN 3" x 1/4"
3" x 1/2"
SST Unitized Wheel 5S FIN 3" x 1/2" 18,100
7S FIN 3" x 1/2"
These products have a “Dual” rating and higher maximum operating speed. See page 21 for additional options.
O.D. = Outside diameter
I.D. = Inside diameter
Factors Affecting Performance
23
23
23
23
2
Convolute Wheels
Flanges
Product Name Product Image Used With Diameter x CH
3M Flange Adapter 3 1" CH Wheels
1" x 1/2"
1" x 5/8"
1" x 3/4"
1" x 7/8"
3M Flange Adapter 5 1/2" Wide x 1" CH or
1" Wide x 1” CH Wheels*
1" x 1/2" x 1/2"
1" x 1" x 1/2"
Flange Adapter 356** 3" CH Wheels 3" x 1-1/2"
Flange Adapter 356** 4" CH Wheels
4" x 1/2"
4" x 3/4"
4" x 1"
4" x 1-1/4"
Flange Adapter 356** 8" CH Wheels 8” x 1-3/4”
Flange Adapter 356** 12" CH Wheels 12" x 1-1/4"
12" x 1-1/2"
*Telescoping wheel Adapters 1" and 1/2" wide are used to reduce 1" wheel center holes to fit 1/2", 5/8", 3/4" or 7/8" shafts.
**Currently available from CPS, call 1-800-843-0619
CH = Center Hole
Accessories
242
4
Accessories
Unitized Wheels
Mandrels
Product Name Product Image Used with Unitized Wheels
Overall Length
x Shank Size
x Washer Diameter
Maximum
Operating
Speed (RPM)
3M Mandrel 931 1" to 1-1/2" diameter x 1/4" wide x 1/8" CH 1-1/2" x 1/8" x 1/2" 13,000
3M Mandrel 932 1-1/2" to 2" diameter x 1/4" to 1/2" wide x 1/4" CH
Note: 5/16" CH is recommended for wheels 6 density and harder. 2" x 1/4" x 13/16" 20,000
3M Mandrel 933 2", 2-1/2" or 3" diameter x 1/4", 1/2", 3/4" or 1" wide x 1/4" CH
Note: 5/16" CH is recommended for wheels 6 density and harder. 2" x 1/4" x 1" 14,000
3M Mandrel 934 3" to 6" diameter x 1/4", 1/2", 3/4" or 1" wide x 1/2" CH 3-1/16" x 1/4" x 2-1/2"
12,000 for 3" dia
8,500 for 4" dia
6,000 for 6" dia
3M Mandrel 936 1" diameter x 1" wide x 3/16" CH 2-1/16" x 1/4" x 3/4" 22,200
Mandrel 946* 1" diameter x 1" wide x 3/16" CH 1-3/4" x 1/4" x 1/2"
Hex Nut Dia. 35,200
3M Mandrel 990 2" to 3" diameter x 1/8"–1/2" wide x 3/8" CH 1-3/4" x 1/4"
25,100 for 2" dia
22,100 for 2-1/2" dia
18,100 for 3" dia
Mandrel 991* 2" to 3" diameter x 3/4" to 1" wide x 3/8" CH 1-7/8" x 1/4"
25,100 for 2" dia
22,100 for 2-1/2" dia
18,100 for 3" dia
Mandrel 992* 1" to 1-1/2" diameter x 1/8" to 1/2" wide x 3/16" CH 1-1/2" x 1/8" 35,200 for 1" dia
30,200 for 1-1/2" dia
Mandrel 994* 1" to 1-1/2" diameter x 1/8" to 1/2" wide x 3/16" CH 1-1/2" x 1/4" 35,200 for 1" dia
30,200 for 1-1/2" dia
Mandrel 996* 1/2" to 3/4" diameter x 1/8" to 1/4" wide x 1/8" CH 1-11/16" x 1/8" 40,200 for 1/2" and
3/4" dia
Mandrel 998* 1/2" to 3/4" diameter x 1/8" to 1/2" wide x 1/8" CH 1-11/16" x 1/4" 40,200 for 1/2" and
3/4" dia
*Currently available from CPS, call 1-800-843-0619
CH = Center Hole
252
5
Convolute and Unitized Equivalency Chart
Convolute Wheel Unitized Wheel
Light Deburring Wheel, 6/7/8S-fine (FIN) EXL Unitized Wheel, 2S-very fine (VFN)
EXL Deburring Wheel, 8S-fine (FIN) EXL Unitized Wheel, 2 and 3S-fine (FIN)
EXL Deburring Wheel, 9S-fine (FIN) and
EXL Deburring Wheel, 8S-medium (MED) N/A
EXL Deburring Wheel, 8A-medium (MED) EXL Unitized Wheel, 2A-medium (MED)
SST Deburring Wheel, 7A-fine (FIN) SST Unitized Wheel, 3/5/7A-fine (FIN) and
EXL Unitized Wheel, 4/6A-fine (FIN)
SST Deburring Wheel, 8S-fine (FIN) SST Unitized Wheel, 3/5/7S-fine (FIN) and
EXL Unitized Wheel, 4/6S-fine (FIN)
Cut and Polish Wheel, 5A-fine (FIN) EXL Unitized Wheel, 6A-medium (MED) and
Cut and Polish Unitized Wheel, 5A-fine (FIN)
Cut and Polish Wheel, 5/7A-medium (MED) Cut and Polish Unitized Wheel, 7/9A-medium (MED)
Cut and Polish Wheel, 7A-coarse (CRS) Cut and Polish Unitized Wheel, 7/9A-coarse (CRS)
CPM Wheel, 5/7/9A-medium (MED) EXL Unitized Wheel, 8A-medium (MED)
CPM Wheel, 5/7/9A-coarse (CRS) EXL Unitized Wheel, 8A-coarse (CRS)
CPM Wheel, 5/7/9A-extra coarse (XCS) EXL Unitized Wheel, 2/4/6/8A-extra coarse (XCS)
N/A Cut and Polish Unitized Wheel, 7/9S-medium (MED)
Metal Finishing Wheel, 5A-medium (MED) Metal Finishing Unitized Wheel, 5A-medium (MED)
Metal Finishing Wheel, 6A-coarse (CRS) Metal Finishing Unitized Wheel, 6A-coarse (CRS)
3M, Roloc, and Scotch-Brite
are trademarks of 3M.
Printed in U.S.A.
© 3M 2008. All rights reserved.
61-5002-8001-3 (482)JR
3
Industrial Business
3M Center
Building 223-6N-01
St. Paul, MN 55144-1000
USA
Please recycle.
When you have questions,
3M has answers.
See how more effi ciency can save you money and protect
your product quality — and how 3M products support a more
consistent and predictable process from start to fi nish.
See for yourself. For a demonstration, contact your local
3M Abrasive Systems sales representative or an authorized
3M Coated Abrasives product distributor, or call the number
listed below.
In the continental United States:
1-866-279-1235
Visit us on the Web at:
www.3M.com/abrasives
Important Notice to Purchaser
Safety Information: Always read and follow all safety information included with the product. Do not exceed maximum operating RPMs. Use guards provided with
machine. Follow safety operation procedures posted in work areas.
Product Use: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable.
However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the
product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge
and control, it is essential that the user evaluate the 3M product to determine whether it is fi t for a particular purpose and suitable for the user’s method of application.
Warranty and Limited Remedy: Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual products, 3M warrants
that each 3M product meets the applicable specifi cations at the time 3M ships the product. Individual products may have additional or different warranties as stated
on product literature, package inserts or product packages. 3M makes no other warranties, express or implied, including, but not limited to, any implied warranty
of merchantability or fi tness for a particular purpose or any implied warranty arising out of a course of dealing, custom or usage of trade. User is responsible for
determining whether the 3M product is fi t for a particular purpose and suitable for user’s application. If the 3M product is defective within the warranty period, your
exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to replace the product or refund the purchase price.
Limitation of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect,
special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.