Features
• Based on S2-LP radio
• S2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860 - 940
MHz frequency band
• Programmable RF output power up to +16 dBm
• Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK
• Air data rate from 0.1 to 500 kbps
• Ultra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm
• IEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual
SYNC word detection
• RX and TX 128 byte FIFO buffers
• Support to wireless M-Bus
• Excellent performance of receiver sensitivity (up to -130 dBm)
• Automatic acknowledgement, retransmission and timeout protocol engine
• Compatible with STM32 Nucleo boards
• Compatible with Arduino UNO R3 connectors
• Support to SMD and SMA antennas
•BALF-SPI2-01D3 IPD balun for matching network and harmonics filter
• Sigfox compatible
• Sample firmware for P2P communication
• 6LoWPAN compatible thanks to STM32Cube
• RoHS compliant
Description
The X-NUCLEO-S2868A1 expansion board is based on the S2-LP radio and
operates in the 868 MHz ISM frequency band.
The expansion board is compatible with ST morpho and Arduino UNO R3
connectors.
The X-NUCLEO-S2868A1 interfaces with the STM32 Nucleo microcontroller via SPI
connections and GPIO pins. You can change some of the GPIOs by mounting or
removing the resistors.
Product summary
Sub-1 GHz RF
expansion board
based on S2-LP
radio for STM32
Nucleo
X-NUCLEO-S2868A1
Ultra-low power,
high
performance,
sub-1 GHz
transceiver
S2-LP
50 Ω nominal
input/conjugate
match balun to
S2-LP
, 868-930
MHz with
integrated
harmonics filter
BALF-SPI2-01D3
Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32
Nucleo
X-NUCLEO-S2868A1
Data brief
DB3602 - Rev 1 - May 2018
For further information contact your local STMicroelectronics sales office.
www.st.com