December 2016
DocID030064 Rev 1
1/4
For further information contact your local STMicroelectronics sales
office
www.st.com
X-NUCLEO-IHM13A1
Low voltage brush DC motor driver expansion board for STM32
Nucleo based on the STSPIN250
Data brief
Features
Low voltage range from 1.8 V to 10 V
Current up to 2.6 A r.m.s.
Current control with adjustable off-time
Full overcurrent and short circuit protection
Thermal shutdown
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards
RoHS compliant
Description
The X-NUCLEO-IHM13A1 expansion board for
STM32 Nucleo is based on the STSPIN250 low
voltage brush DC motor driver.
It provides an affordable and easy-to-use solution
for the implementation of portable motor driving
applications such as thermal printers, robotics
and toys.
The X-NUCLEO-IHM13A1 is compatible with the
Arduino UNO R3 connector and most STM32
Nucleo boards.
Schematic diagram
2/4
DocID030064 Rev 1
1 Schematic diagram
Figure 1: X-NUCLEO-IHM13A1 circuit schematic
X-NUCLEO-IHM13A1
DocID030064 Rev 1
3/4
2 Revision history
Table 1: Document revision history
Date
Version
Changes
05-Dec-2016
1
Initial release.
X-NUCLEO-IHM13A1
4/4
DocID030064 Rev 1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2016 STMicroelectronics – All rights reserved