Organic Conductive Polymer Capacitors OCR OCR Series Features 105, 2,000 hours assured Ultra low ESR with large permissible ripple current RoHS Compliance Marking color: Blue Specifications Items Category Temperature Range Capacitance Tolerance Performance -55 ~ +105 20% (at 120Hz, 20) Rated voltage applied, after 2 minutes at 20. See Standard Ratings Leakage Current (at 20)* Dissipation Factor (Tan at 120Hz, 20) ESR (at 100k ~ 300k Hz, 20) See Standard Ratings See Standard Ratings Test Time 2,000 Hrs Capacitance Change Within 20% of initial value Dissipation Factor Less than 150% of specified value ESR Less than 150% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied for 2,000 hours at 105. Endurance Test Time 1,000 Hrs Capacitance Change Within 20% of initial value Dissipation Factor Less than 150% of specified value ESR Less than 150% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after subjecting them at 60, 90 to 95% RH for 1,000 hours. Leakage current should be tested after voltage treatment*. Moisture Resistance Resistance to Soldering Heat * (Please refer to page 10 for soldering conditions) Capacitance Change Dissipation Factor ESR Leakage Current Ripple Current & Frequency Multipliers Frequency (Hz) Multiplier Within 10% of initial value Less than 130% of specified value Less than 130% of specified value Within specified value 120 f < 1k 0.05 1k f < 10k 0.3 10k f < 100k 0.7 100k f < 500k 1.0 * For any doubt about measured values, measure the leakage current again after the following voltage treatment. Voltage treatment: Applying DC rated voltage to the capacitors for 2 hours at 105 . Diagram of Dimensions Lead Spacing and Diameter D+max d L+ max D P0.5 4 min D = 6.3 Negative polarity 36 A2 10 16V Date code Rated cap. Rated voltage & Series code Negative polarity A2 OCR 470 6.3V Date code Series name Rated cap. Rated voltage 2012E2 8 Unit: mm 10 10 5.5 6.5 11 11.5 10 12.5 2.5 2.5 2.5 3.5 5.0 5.0 D = 8 ~ 10 6.3 L Marking 6.3 P d 15 min 6.3 0.45 0.6 1.0 1.5 0.5 Organic Conductive Polymer Capacitors Dimension: DxL(mm) Ripple Current: mA/rms at 100k Hz, 105 Standard Ratings W. V. (V) 2.5V (0E) Surge Voltage (V) 2.8 Capacitance (F) 6.3V (0J) 10V (1A) 16V (1C) 7.2 11.5 18.4 35V (1V) 50V (1H) 28.7 40.0 57.5 Rated R. C. (mA/rms at 100k Hz, 105) 0.12 110 28 2,390 0.12 195 18 3,160 0.18 340 10 5,230 10 x 10 0.18 500 14 4,700 5,500 680 8 x 11.5 10 x 12.5 0.18 750 8 150 6.3 x 5.5 0.12 120 40 1,810 270 6.3 x 11 0.12 216 15 3,200 560 8 x 11.5 0.18 448 10 5,230 1,200 10 x 12.5 0.18 960 8 5,500 100 6.3 x 5.5 0.12 126 40 1,810 220 6.3 x 11 0.12 277 18 3,160 330 6.3 x 6.5 0.12 416 28 2,390 390 8 x 11.5 0.15 491 12 4,770 470 8 x 11.5 0.15 592 12 4,770 820 10 x 12.5 0.15 1,033 10 5,500 100 6.3 x 6.5 0.12 200 45 1,700 220 10 x 10 0.15 440 17 3,950 330 8 x 11.5 0.12 660 14 4,420 560 10 x 12.5 0.12 1,360 12 5,300 47 6.3 x 5.5 0.10 150 50 1,650 100 6.3 x 11 0.10 320 22 2,820 0.12 576 16 4,360 0.12 1,056 16 4,360 180 8 x 11.5 10 x 10 10 x 12.5 0.12 1,056 14 5,050 22 6.3 x 5.5 0.10 88 60 1,450 56 6.3 x 11 0.10 224 25 2,650 0.15 400 24 3,320 100 8 x 11.5 100 10 x 10 0.15 400 24 3,320 150 10 x 12.5 0.15 600 20 4,320 330 10 x 12.5 0.12 1,320 24 2,800 6.8 6.3 x 5.5 0.10 170 80 1,200 33 25V (1E) ESR (m/at 100k ~ 300k Hz, 20 Max) 6.3 x 11 330 23.0 LC (A) 6.3 x 5.5 330 20V (1D) Tan (120Hz, 20) 390 1,500 4.6 Size DxL(mm) 220 1,000 4V (0G) OCR 56 8 x 11.5 0.12 165 24 3,320 8 x 11.5 0.12 280 24 3,320 4,320 10 x 12.5 0.12 280 20 68 8 x 11.5 0.12 340 24 3,320 100 10 x 12.5 0.12 500 20 4,320 270 10 x 12.5 0.12 1,350 25 2,800 22 8 x 11.5 0.12 154 50 2,300 39 8 x 11.5 0.12 273 31 2,100 47 10 x 12.5 0.12 329 30 3,650 68 10 x 12.5 0.12 476 28 2,700 150 10 x 12.5 0.12 1,050 26 2,700 27 8 x 11.5 0.12 270 36 2,000 47 10 x 12.5 0.12 470 31 2,500 2012E2 37