V17 CFM100M SERIES 100W MEDICAL&ITE OPEN FRAME AC-DC MODULES WITH PFC Features * Universal Input Range 90 ~ 264VAC * Medical and ITE Approved * 3"x 5" Compact Size * Less than 1 U high * Industry Standard Pin Out * Active PFC Meets EN61000-3-2 * High Efficiency up to 92% * Meets CISPR/FCC Class B * Remote Voltage Sense * Over Voltage Protection * Continuous Short Circuit Protection * No Load Power Consumption<0.5W * Meets 2MOPP MODEL OUTPUT VOLTAGE MIN. LOAD RIPPLE & NOISE NOTE 1 VOLTAGE ADJ. RANGE VOLTAGE ACCURACY NOTE 2 LINE REGULATION NOTE 3 LOAD REGULATION NOTE 4 % EFF. (Typ.) NOTE 5 20 A 0A 2% 4.75~5.25 1% 0.5% 1% 83% MAX. LOAD CFM100M050 5V CFM100M075 7.5 V 13.4 A 0A 2% 7.13~7.88 1% 0.5% 1% 87% CFM100M090 9V 11.2 A 0A 1% 8.55~9.45 1% 0.5% 1% 89% CFM100M120 12 V 8.4 A 0A 1% 11.4~12.6 1% 0.5% 1% 89% CFM100M150 15 V 6.7 A 0A 1% 14.25~15.75 1% 0.5% 1% 90% CFM100M180 18 V 5.6 A 0A 1% 17.1~18.9 1% 0.5% 1% 90% CFM100M240 24 V 4.2 A 0A 1% 22.8~25.2 1% 0.5% 1% 91% CFM100M280 28 V 3.6 A 0A 1% 26.6~29.4 1% 0.5% 1% 90% CFM100M360 36 V 2.8 A 0A 1% 34.2~37.8 1% 0.5% 1% 91% CFM100M480 48 V 2.1 A 0A 1% 45.6~50.4 1% 0.5% 1% 92% Specifications are subject to change without notice. 1 V17 Specifications CFM100M Series Derating Curve INPUT SPECIFICATIONS: CFM100M Voltage ...................................................................... 90~264Vac Leakage Current ............................................................. 300uA max. OUTPUT SPECIFICATIONS: Hold-up Time .................................................................. 16ms typ. Short Circuit Protection ............................. Hiccup mode(Auto Recovery) Adjustment Range on Vout.......................................................... 5% Over Voltage Protection .............................. Recycle AC input to restart Temperature Coefficient ......................................................... 0.05%/ 100% Rate Loa d ( %) Frequency ..................................................................... 47 to 63Hz Inrush Current ........................................................ 80A max. @240Vac 75% 20LFM(Natural Convection) 50% 100LFM 25% 0% -20 -10 0 10 20 30 40 50 60 Ambient Temperature(C) GENERAL SPECIFICATIONS: Isolation ................................................... Input to output = 5,656VDC NOTE: Operating Temperature ........................... -20~ 70 (see Derating Curve) 1. CFM100M050:Add a 0.1uF ceramic capacitor and 220uF E.L. Storage Temperature ........................................................... -20 ~ 85 Humidity ...................................................... 93% RH max. Non condensing capacitor to output for Ripple & Noise measuring @20MHz BW. Cooling ............................................................. Natural Convection Switching Frequency ........................................................ 90KHz Typical output for Ripple & Noise measuring @20MHz BW. 2. Voltage accuracy is set at 100% rated load and 25 Ta. 3. Line regulation is measured from high line to low line with full load. 4. Load regulation is measured from Full to 10% load. MTBF ................ MIL-HDBK-217F, GB, 25/115VAC ...... 200Khrs min. Altitude ............................................................................... 3000m Dimensions .............. 5.000x3.000x1.050inches (127.00x76.20x26.67mm) Weight .................................................................. 270g (0.6Pounds) SAFETY AND EMC: Emission and Immunity ................... EN55024, EN61000-6-1, EN61204-3 EN60601-1-2, EN61000-3-2 Class A, B, C, D, EN61000-3-3 EN55011 Class B, EN55022 Class B, FCC Part15 Class B Safety .......... IEC60601-1:2005, EN60601-1:2006, ANSI/AAMI ES60601-1:2005 IEC60950-1, EN60950-1, UL60950-1 Other Model: Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to 5. Typical efficiency at 230VAC and full load at 25. 6. Standard input and output connectors wafer with LONG CHU P3060 series and mate with MOLEX housing 09-50-1031 and 09-50-1081 or equivalent. 7. DC output pin 1, 2, 3, 4: Vout (-), DC output pin 5, 6, 7, 8: Vout (+). CFM100M Series All Dimensions are in inches[mm] Tolerance: Inches:x.xxx= 0.02 Millimeters:x.xx= 0.5 5.000(127.00) 4.546(115.48) 0.224(5.70) ACN VR 0.224(5.70) 0.063(1.60) 1.050(26.67)max 2.555(64.90) RSRS+ 0.118(3.00)max ACL 2 3.000(76.20) LED 1 2 3 4 5 6 7 8 Typical at 25C, nominal line and 75% load, unless otherwise Specified 70 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Cincon: CFM100M090 CFM100M120 CFM100M150 CFM100M180 CFM100M240 CFM100M480 CFM100M075 CFM100M360