YAGEO CORPORATION ELECTROLYTIC CAPACITORS
SH [ For General ]
105°C Single-Ended Lead Aluminum Electrolytic Capacitors
for the Rated Voltage up to 450V
ELECTRICAL CHARACTERISTICS
Operating Temperature Range : -40 ~ +105°C / -25 ~ +105°C
Rated Voltage Range : 6.3 ~ 100V / 160 ~ 450V
Rated Capacitance Range : 0.47 ~ 15000µF / 0.47 ~ 470µF
Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C
Leakage Current (µA) : I = 0.01CV (µA) + 3µA / 0.03CV (µA) + 10µA
(After Rated Voltage Applied for 2 Minutes )
Dissipation Factor
W V (V) : 6.3 10 16 25 35 50 63 ~ 100 160 ~ 250 350 ~ 450
D.F (%) : 26 22 18 16 14 12 10 15 20
For capacitors whose capacitance exceeds 1000µF. The value of DF(%) is increased by 2% for every
addition of 1000µF.
Low Temperature Stability Impedance Ratio (Max.)
W V (V) : 6.3 10 16 25 ~ 100 160 ~ 250 350 ~ 450
Impedance : Z - 25°C / Z + 25°C 4 3 2 2 4 4
Z - 40°C / Z + 20°C 8 6 4 3 - -
Endurance : After the rated voltage has been applied at 105°C for 2000 hours, the capacitors shall
meet following requirements.
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : 200% or Less of Initial Specified Value
(c) Leakage Current : Initial Specied Value or Less
Shelf Life: After leaving capacitors under no load at 105°C for 1000 hours, the capacitors shall meet
the same requirements as Endurance.
Miniature Aluminum
Electrolytic Capacitors
DESCRIPTION
Long life for 2000 hours at 105°C, ideally suited for
high quality and high reliability applications.
Featuring high CV products
MULTIPLIER FOR RIPPLE CURRENT
Frequency Coefcient
FREQUENCY (Hz) 120 300 1K
10K~100K
6.3~100V Below~68µF 1.00 1.30 1.57 2.00
6.3~100V 100~470µF 1.00 1.23 1.34 1.50
6.3~100V 471~22000µF 1.00 1.10 1.13 1.15
160~450V ALL Cap(µF) 1.00 1.25 1.40 1.60
Temperature Coefcient
TEMPERATURE (°C) 65 85 105
FACTOR 1.70 1.40 1.00
L
+
a 15Min. D
±
0.5
P
±
0.5
Coated case
4Min.
Rubber Stand-off
L ≤ 16 L + 1.5Max.
L > 16 L + 2Max.
Dø = 8 & 10 L + 2.5Max.
Dø < 20 Dø + 0.5
Dø ≥ 20 Dø + 1
Dø F dø
5.0 2.0 0.5
6.3 2.5
8.0 3.5 0.6
10.0 5.0
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0
Rubber End Seal
L 15Min. D
±
0.5
F
±
0.5
5Min.
Vinyl Sleeve
(P.V.C)
DIAGRAM OF DIMENSIONS Dimensions: mm