135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55C to + 200C Operation FEATURES Standard and Extended Ratings. Model 135D tantalum-case tantalum electrolytic capacitors incorporate the advantages of all the varieties of electrolytic capacitors and eliminate most of the disadvantages. These units have a 3 volt reverse voltage capability at + 85C and a higher ripple current capability than any other electrolytic type with similar combinations of capacitance and case size. Designed for the aerospace applications, this capacitor was developed under partial sponsorship of the Marshall Space Flight Center, National Aeronautics and Space Administration. The capacitors have a high resistance to damage from shock and vibration. Extended range ratings and high temperature designs are available. Model 135D capacitors are commercial equivalents of Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style; TLT, TXT, THT, THX and Military Style CLR79 and CLR81, designed to meet the performance requirements of Military Specification MIL-PRF-39006/22/25. Capacitors to meet MILPRF-39006/22/25 should be ordered by part numbers shown in that specification. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55C to + 85C. (To + 200C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25C. 20% standard. 10%, 5% available as special. DC Leakage Current (DCL Max.): At + 25C and above: Leakage current shall not exceed the values listed in the Standard Ratings Tables. Life Test: Capacitors are capable of withstanding a 2000 hour life test at a temperature of + 85C or + 125C at the applicable rated DC working voltage. Following life test: 1. DCL, measured at + 85C rated voltage, shall not be in excess of the original requirement. 2. The equivalent series resistance shall not exceed 150% of the initial requirement. 3. Change in capacitance shall not exceed 10% from the initial measurement. ORDERING INFORMATION 135D 306 X0 006 C 2 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85C CASE CODE STYLE NUMBER This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = 20% X9 = 10% X5 = 5% This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 volts). See Ratings and Case Codes Table. Standard 0 = No outer tube. 2 = Outer polyesterfilm insulation. High Temperature 60 = No outer tube 6 = High temperaturefilm insulation (above + 125C). Packaging: The use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. Document Number: 40024 Revision 01-Sep-03 For technical questions, contact wettants@vishay.com www.vishay.com 41 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55C to + 200C Operation Vishay DIMENSIONS in inches [millimeters] L1 E E D Weld 0.0253 0.002 [0.64 0.05] Dia. (No. 22 AWG) Tinned Nickel Leads Solderable and Weldable Tantalum L2 CASE CODE WEIGHT IN GRAMS (Max.) L1 L2 (Max.) E 0.188 0.016 [4.78 0.41] 0.453 + 0.031 - 0.016 [11.51 + 0.79 - 0.41] 0.734 [18.64] 1.500 0.250 [38.10 6.35] 2.6 T2 0.281 0.016 [7.14 0.41] 0.641 + 0.031 - 0.016 [16.28 + 0.79 - 0.41] 0.922 [23.42] 2.250 0.250 [57.15 6.35] 6.2 T3 0.375 0.016 [9.53 0.41] 0.766 + 0.031 - 0.016 [19.46 + 0.79 - 0.41] 1.047 [26.59] 2.250 0.250 [57.15 6.35] 11.6 1.343 0.375 0.016 1.062 + 0.031 - 0.016 2.250 0.250 [34.11] [9.53 0.41] [26.97 + 0.79 - 0.41] [57.15 6.35] *For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body. 17.7 TYPE 135D CLR 79/81 EQUIV. D C T1 F T K T4 STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER* Max. ESR at + 25C 120 Hz (Ohms) Max. IMP. at - 55C 120 Hz (Ohms) Max. CAPACITANCE CHANGE (%) at Max. DCL (A) at + 25C + 85C + 125C - 55C + 85C 30 68 140 270 330 560 1200 C C F F T T K 6 WVDC at + 85C . . . 4 WVDC at + 125C. . . 3.6 WVDC at + 200C 2.0 - 40 + 10.5 4.0 100 1.0 135D306X0006C2 - 40 + 14 3.2 60 1.0 2.0 135D686X0006C2 + 14 40 1.0 3.0 - 40 2.0 135D147X0006F2 1.0 6.5 - 44 + 17.5 2.2 25 135D277X0006F2 7.9 - 44 + 14 1.4 20 2.0 135D337X0006T2 - 64 + 17.5 25 2.0 13.0 1.3 135D567X0006T2 + 25 3.0 14.0 - 80 1.0 20 135D128X0006K2 25 56 120 220 290 430 850 C C F F T T K 135D256X0008C2 135D566X0008C2 135D127X0008F2 135D227X0008F2 135D297X0008T2 135D437X0008T2 135D857X0008K2 + 125C Max. RIPPLE 40kHz rms (mA) + 12 + 16 + 16 + 20 + 16 + 20 + 25 820 960 1200 1375 1800 1900 2265 + 12 + 16 + 20 + 20 + 20 + 20 + 25 820 900 1230 1370 1770 1825 2330 8 WVDC at + 85C . . . 5 WVDC at + 125C . . . 4.8 WVDC at + 200C 4.0 3.3 2.6 2.4 1.8 1.4 1.0 100 59 50 30 25 25 22 1.0 1.0 1.0 1.0 2.0 2.0 4.0 2.0 2.0 2.0 7.0 6.0 14.0 16.0 - 40 - 40 - 44 - 44 - 64 - 64 - 80 + 10.5 + 14 + 17.5 + 17.5 + 17.5 + 17.5 + 25 10 WVDC at + 85C . . . 7 WVDC at + 125C . . . 6 WVDC at + 200C 20 47 100 180 250 390 750 C C F F T T K 135D206X0010C2 135D476X0010C2 135D107X0010F2 135D187X0010F2 135D257X0010T2 135D397X0010T2 135D757X0010K2 15 33 70 120 170 270 540 C C F F T T K 135D156X0015C2 135D336X0015C2 135D706X0015F2 135D127X0015F2 135D177X0015T2 135D277X0015T2 135D547X0015K2 4.0 3.7 2.4 2.2 1.8 1.5 1.0 120 90 60 40 30 25 23 1.0 1.0 1.0 1.0 2.0 2.0 4.0 2.0 2.0 4.0 7.0 10.0 16.0 16.0 - 32 - 36 - 36 - 36 - 40 - 64 - 80 + 10.5 + 14 + 14 + 14 + 14 + 17.5 + 25 + 12 + 16 + 16 + 16 + 16 + 20 + 25 820 855 1200 1365 1720 1800 2360 15 WVDC at + 85C . . . 10 WVDC at + 125C . . . 9 WVDC at + 200C www.vishay.com 42 4.4 4.0 2.8 2.6 2.4 2.2 1.0 155 90 75 50 35 30 23 1.0 1.0 1.0 1.0 2.0 2.0 6.0 2.0 2.0 4.0 7.0 10.0 16.0 24.0 - 24 - 28 - 28 - 28 - 32 - 56 - 80 For technical questions, contact wettants@vishay.com + 10.5 + 14 + 14 + 17.5 + 14 + 17.5 + 25 + 12 + 16 + 16 + 20 + 16 + 20 + 25 780 820 1150 1450 1480 1740 2330 Document Number: 40024 Revision 01-Sep-03 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55C to + 200C Operation Vishay STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER* 10 22 50 100 120 180 350 C C F F T T K 135D106X0025C2 135D226X0025C2 135D506X0025F2 135D107X0025F2 135D127X0025T2 135D187X0025T2 135D357X0025K2 Max. ESR at + 25C 120 Hz (Ohms) Max. IMP. at - 55C 120 Hz (Ohms) Max. CAPACITANCE CHANGE (%) at Max. DCL (A) at + 25C + 85C + 125C - 55C + 85C + 125C Max. RIPPLE 40kHz rms (mA) +9 + 12 + 15 + 15 + 15 + 15 + 25 715 800 1130 1435 1450 1525 1970 + 12 + 12 + 12 + 15 + 12 + 15 + 25 640 780 1120 1285 1450 1525 1950 + 12 + 15 + 25 660 1195 1950 +6 +9 + 12 + 15 + 12 + 15 + 25 580 715 1005 1155 1335 1400 1900 +6 +9 +9 + 15 + 12 + 15 + 20 525 625 930 1110 1330 1365 1850 +6 +9 +9 + 15 + 12 + 15 + 20 525 610 890 1000 1250 1335 1850 25 WVDC at + 85C . . . 15 WVDC at + 125C . . . 12 WVDC at + 200C 5.3 4.2 3.0 2.8 2.6 2.2 1.3 220 140 70 50 38 32 24 1.0 1.0 1.0 1.0 2.0 2.0 7.0 2.0 2.0 2.0 10.0 6.0 18.0 28.0 - 16 - 20 - 28 - 28 - 32 - 48 - 70 +8 + 10.5 + 13 + 13 + 13 + 13 + 25 30 WVDC at + 85C . . . 20 WVDC at + 125C . . . 18 WVDC at + 200C 8 15 40 68 100 150 300 C C F F T T K 135D805X0030C2 135D156X0030C2 135D406X0030F2 135D686X0030F2 135D107X0030T2 135D157X0030T2 135D307X0030K2 15 68 270 C F K 135D156X0035C2 135D686X0035F2 135D277X0035K2 6.6 6.2 4.0 2.9 2.7 2.3 1.4 275 175 65 60 40 35 25 1.0 1.0 1.0 1.0 2.0 2.0 8.0 2.0 2.0 5.0 8.0 12.0 18.0 32.0 - 16 - 20 - 24 - 24 - 28 - 48 - 60 +8 + 10.5 + 10.5 + 13 + 10.5 + 13 + 25 35 WVDC at + 85C . . . 22 WVDC at + 125C . . . 21 WVDC at + 200C 6.2 2.9 1.4 175 60 26 0.75 1.0 3.0 1.5 2.0 12.0 - 20 - 24 - 58 + 10.5 + 13 + 25 50 WVDC at + 85C . . . 30 WVDC at + 125C . . . 30 WVDC at + 200C 5 10 25 47 60 82 160 C C F F T T K 135D505X0050C2 135D106X0050C2 135D256X0050F2 135D476X0050F2 135D606X0050T2 135D826X0050T2 135D167X0050K2 8.0 6.4 4.6 3.7 2.9 2.5 1.5 400 250 95 70 45 45 27 1.0 1.0 1.0 1.0 2.0 2.0 8.0 2.0 2.0 5.0 9.0 12.0 16.0 32.0 - 16 - 24 - 20 - 28 - 16 - 32 - 50 +5 +8 + 10.5 + 13 + 10.5 + 13 + 25 60 WVDC at + 85C . . . 40 WVDC at + 125C . . . 36 WVDC at + 200C 4 8.2 20 39 50 68 140 C C F F T T K 135D405X0060C2 135D825X0060C2 135D206X0060F2 135D396X0060F2 135D506X0060T2 135D686X0060T2 135D147X0060K2 9.3 6.6 4.7 3.4 2.9 2.5 1.5 550 275 105 90 50 50 28 1.0 2.0 +5 - 16 1.0 2.0 +8 - 24 1.0 5.0 +8 - 16 1.0 9.0 + 10.5 - 28 2.0 12.0 + 10.5 - 16 2.0 16.0 + 10.5 - 32 32.0 + 20 8.0 - 40 75 WVDC at + 85C . . . 50 WVDC at + 125C . . . 45 WVDC at + 200C 3.5 6.8 15 33 40 56 110 C C F F T T K 135D355X0075C2 135D685X0075C2 135D156X0075F2 135D336X0075F2 135D406X0075T2 135D566X0075T2 135D117X0075K2 9.5 6.8 5.3 4.2 3.0 2.6 1.5 650 300 150 90 60 60 29 1.0 1.0 1.0 1.0 2.0 2.0 9.0 2.0 2.0 5.0 10.0 12.0 17.0 36 .0 - 16 - 20 - 16 - 24 - 16 - 28 - 35 +5 +8 +8 + 10.5 + 10.5 + 10.5 + 20 *Part Numbers listed are for units with 20% capacitance tolerance insulated capacitors. For 10% tolerance capacitors, change the digit following the letter "X" from "0" to "9"; for 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve, change the last digit in the part number from "2" to "6". Document Number: 40024 Revision 01-Sep-03 For technical questions, contact wettants@vishay.com www.vishay.com 43 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55C to + 200C Operation Vishay STANDARD RATINGS CAPACITANCE (F) CASE CODE 2.5 4.7 11 22 30 43 86 C C F F T T K PART NUMBER* Max. ESR at + 25C 120 Hz (Ohms) Max. IMP. at - 55C 120 Hz (Ohms) Max. CAPACITANCE CHANGE (%) at Max. DCL (A) at + 25C + 85C + 125C - 55C + 125C Max. RIPPLE 40kHz rms (mA) +8 +8 +8 +8 +8 +8 + 15 505 565 835 965 1240 1335 1800 +7 +7 +7 +7 +7 +7 + 15 +8 +8 +8 +8 +8 +8 + 15 415 520 755 860 1130 1200 1800 +13 +16 +16 +20 +20 +25 +16 +20 +20 +25 +25 +30 1000 1500 1500 1900 1900 2300 +13 +16 +20 +25 +16 +20 +25 +30 1000 1500 1900 2300 +14 +13 +16 +16 +20 +25 +16 +16 +20 +20 +25 +30 900 900 1450 1450 1850 2300 + 85C 100 WVDC at + 85C . . . 65 WVDC at + 125C . . . 60 WVDC at + 200C 135D255X0100C2 135D475X0100C2 135D116X0100F2 135D226X0100F2 135D306X0100T2 135D436X0100T2 135D866X0100K2 10.6 8.5 6.0 4.8 3.3 2.6 1.6 950 500 200 100 80 70 30 1.0 1.0 1.0 1.0 2.0 2.0 9.0 2.0 2.0 4.0 9.0 12.0 17.0 36.0 - 16 - 16 - 16 - 16 - 16 - 20 - 25 +7 +7 +7 +7 +7 +7 + 15 125 WVDC at + 85C . . . 85 WVDC at + 125C . . . 75 WVDC at + 200C 1.7 3.6 9 14 18 25 56 C C F F T T K 135D175X0125C2 135D365X0125C2 135D905X0125F2 135D146X0125F2 135D186X0125T2 135D256X0125T2 135D566X0125K2 15.6 10.0 7.4 5.7 3.7 3.2 1.6 1250 600 240 167 129 93 32 1.0 1.0 1.0 1.0 2.0 2.0 10.0 2.0 2.0 5.0 7.0 9.0 13.0 40.0 - 16 - 16 - 16 - 16 - 16 - 16 - 25 EXTENDED RATINGS 6 WVDC at + 85C . . . 4 WVDC at + 125C . . . 3.6 WVDC at + 200C 220 560 820 1200 1500 2200 C F F T T K 135D227X0006C2 135D567X0006F2 135D827X0006F2 135D128X0006T2 135D158X0006T2 135D228X0006K2 180 680 1500 1800 C F T K 135D187X0008C2 135D687X0008F2 135D158X0008T2 135D188X0008K2 120 150 390 560 1200 1500 C C F F T K 135D127X0010C2 135D157X0010C2 135D397X0010F2 135D567X0010F2 135D128X0010T2 135D158X0010K2 3.0 2.5 2.5 1.5 1.5 1.0 36 21 18 18 18 13 2 3 3 5 5 6 9 9 14 18 20 24 - 64 - 77 - 88 - 88 - 90 - 90 8 WVDC at + 85C . . . 5 WVDC at + 125C . . . 4.8 WVDC at + 200C 3.0 2.5 1.5 1.0 45 22 18 14 2 3 5 7 9 14 20 25 - 60 - 83 - 90 - 90 10 WVDC at + 85C . . . 7 WVDC at + 125C . . . 6 WVDC at + 200C 3.2 3.0 2.5 2.5 1.5 1.0 54 54 27 27 18 15 2 2 3 3 5 7 6 9 9 16 20 25 - 40 - 55 - 66 - 77 - 88 - 88 15 WVDC at + 85C . . . 10 WVDC at + 125C . . . 9 WVDC at + 200C 82 100 270 390 680 820 1000 C C F F T T K 135D826X0015C2 135D107X0015C2 135D277X0015F2 135D397X0015F2 135D687X0015T2 135D827X0015T2 135D108X0015K2 3.9 3.9 2.5 2.5 1.8 1.8 1.2 72 72 31 31 22 22 17 2 2 3 3 6 6 8 6 9 9 16 18 24 32 - 35 - 44 - 62 - 66 - 74 - 77 - 77 +12 +13 +16 +16 +20 +20 +25 +16 +16 +15 +20 +25 +25 +30 900 900 1450 1450 1800 1800 2330 25 WVDC at + 85C . . . 15 WVDC at + 125C . . . 12 WVDC at + 200C 56 68 180 270 470 560 680 C C F F T T K 135D566X0025C2 135D686X0025C2 135D187X0025F2 135D277X0025F2 135D477X0025T2 135D567X0025T2 135D687X0025K2 4.3 4.3 2.7 2.7 1.8 1.8 1.2 90 90 33 33 24 24 19 2 2 3 3 6 7 8 6 9 9 16 18 28 32 - 25 - 40 - 54 - 62 - 65 - 72 - 72 +12 +12 +13 +13 +18 +20 +25 +15 +15 +15 +16 +25 +25 +30 850 850 1400 1400 1750 1750 2100 * Part Numbers listed are for units with 20% capacitance tolerance insulated capacitors. For 10% tolerance capacitors, change the digit following the letter "X" from "0" to "9"; for 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve, change the last digit in the part number from "2" to "6". www.vishay.com 44 For technical questions, contact wettants@vishay.com Document Number: 40024 Revision 01-Sep-03 135D Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For-55C to + 200C Operation Vishay EXTENDED RATINGS CAPACITANCE (F) CASE CODE PART NUMBER* Max. ESR at + 25C 120 Hz (Ohms) Max. IMP. at - 55C 120 Hz (Ohms) Max. CAPACITANCE CHANGE (%) at Max. DCL (A) at + 25C + 85C + 125C - 55C + 125C Max. RIPPLE 40kHz rms (mA) +15 +15 +15 +16 +25 +25 +30 800 800 1200 1200 1500 1500 2000 +14 +15 +25 +30 820 1315 1640 2040 +12 +15 +15 +25 +30 700 1200 1200 1450 1900 +10 +15 +12 +16 +20 +12 +15 +15 +20 +25 700 1100 1100 1400 1850 +10 +12 +12 +16 +20 +12 +15 +15 +20 +25 600 1000 1000 1300 1800 +12 +15 +16 +17 800 1300 1600 2000 +12 +15 +16 +17 700 1200 1500 1900 + 85C 30 WVDC at + 85C . . . 20 WVDC at + 125C. . . 18 WVDC at + 200C 47 56 150 220 390 470 560 C C F F T T K 135D476X0030C2 135D566X0030C2 135D157X0030F2 135D227X0030F2 135D397X0030T2 135D477X0030T2 135D567X0030K2 39 120 330 370 C F T K 135D396X0035C2 135D127X0035F2 135D337X0035T2 135D477X0035K2 33 100 120 270 330 C F F T K 135D336X0050C2 135D107X0050F2 135D127X0050F2 135D277X0050T2 135D337X0050K2 27 82 100 220 270 C F F T K 135D276X0060C2 135D826X0060F2 135D107X0060F2 135D227X0060T2 135D277X0060K2 22 68 82 180 220 C F F T K 135D226X0075C2 135D686X0075F2 135D826X0075F2 135D187X0075T2 135D227X0075K2 5.2 5.2 2.5 2.5 1.8 1.8 1.3 100 100 36 36 25 25 20 2 2 3 3 6 8 9 6 9 9 16 18 32 36 - 23 - 38 - 42 - 60 - 55 - 65 - 65 +12 +12 +13 +13 +18 +20 +25 35 WVDC at + 85C . . . 22 WVDC at + 125C . . . 21 WVDC at + 200C 4.1 2.5 1.8 1.3 61 31 20 15 2 3 6 9 6 10 18 36 - 22 - 40 - 50 - 60 +12 +13 +16 +25 50 WVDC at + 85C . . . 30 WVDC at + 125C . . . 30 WVDC at + 200C 5.0 2.8 2.5 2.0 1.5 135 49 49 30 30 2 4 4 8 9 9 12 24 32 36 - 29 - 36 - 42 - 46 - 46 +10 +13 +12 +20 +25 60 WVDC at + 85C . . . 40 WVDC at + 125C . . . 36 WVDC at + 200C 5.0 2.9 2.5 1.8 1.4 144 54 54 29 23 3 4 4 8 9 12 16 20 32 36 - 24 - 30 - 36 - 40 - 45 75 WVDC at + 85C . . . 50 WVDC at + 125C . . . 45 WVDC at + 200C 5.1 3.0 2.5 2.2 1.8 157 63 63 30 24 3 4 4 9 10 12 16 24 36 40 - 19 - 25 - 30 - 35 - 40 100 WVDC at + 85C . . . 65 WVDC at + 125C . . . 60 WVDC at + 200C 10 39 68 120 C F T K 135D106X0100C2 135D396X0100F2 135D686X0100T2 135D127X0100K2 5.9 3.5 2.2 2.7 200 80 40 30 3 5 10 12 12 24 40 48 - 17 - 20 - 30 - 35 +10 +12 +14 +15 125 WVDC at + 85C . . . 85 WVDC at + 125C . . . 75 WVDC at + 200C 6.8 27 47 82 C F T K 135D685X0125C2 135D276X0125F2 135D476X0125T2 135D826X0125K2 11.7 3.5 2.2 2.8 300 90 50 32 3 5 10 12 12 24 40 48 - 14 - 18 - 26 - 30 +10 +12 +14 +15 *Part Numbers listed are for units with 20% capacitance tolerance insulated capacitors. For 10% tolerance capacitors, change the digit following the letter "X" from "0" to "9"; for 5%, change the digit following the letter "X" from "0" to "5". For capacitors without outer polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve, change the last digit in the part number from "2" to "6". Document Number: 40024 Revision 01-Sep-03 For technical questions, contact wettants@vishay.com www.vishay.com 45 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1