Miniature ø8-16mm AP Series Miniature Pilot Lights
A5-210 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A5
Switches & Pilot Devices
Miniature Pilot Lights with Super Bright LEDs
Specifications
Lamp Built-in LED with current limiting resistor
Operational Voltage 6, 12, 24VDC (full voltage),
110/120, 220/240VAC, (transformer)
110VDC (with converter)
Current Ratings
AP8: 6VDC/18mA, 12VDC/18mA, 24VDC/12mA
AP1: 6VDC/18mA, 12VDC/18mA, 24VDC/12mA
AP2: 6VDC/33mA, 12VDC/22mA, 24VDC/11mA
AP6: 6VDC/33mA, 12VDC/22mA, 24VDC/11mA
Operating Temp. -20°C to +55°C
Operating Humidity 45 to 85% RH
Insul. Resistance 100MΩ min. (500V DC megger)
Between live and dead parts
Rev. Withstand Voltage AP2/AP6: 100V
AP1/AP8: 200V
Solder Terminal Soldering 260°C maximum (5 sec.)
Degree of Protection AP8: IP40 (dustproof)
Other Series: IP65 (oiltight)
Optional Adaptors/Converters
AC Adaptor DC-DC Converter
Applicable Units AP2 & AP6 (with 6V LED only)
Operating Voltage 110/120VAC 50/60 Hz
220/240VAC 50/60 Hz 110V DC (90 to 140V DC)
Power Consumption 1.6 VA maximum 1W maximum
Insulation Voltage 250 V AC 140V DC
Insulation Resistance 10MΩ min. (500V DC megger) Between live and dead parts
Dielectric Strength 2,000V AC, 1 minute Between live/dead parts
2,000V AC, 1 minute Between terminals 2,000V AC, 1 minute Between live/dead parts
1,500V AC, 1 minute Between terminals
AP8
AP1
AP2
AP6
AP Series — Miniature Pilot Lights
Key features of AP series include:
• Long service life, low maintenance
• Space saving miniature style
• Dome or flat lens models
• Built-in current-limiting resistor and reverse polarity protection diode
• Five illumination colors: red, green, amber, yellow, and white
• AC adaptor (120V AC and 240V AC) and DC-DC Converter (110V DC) options
on 12mm and 16mm units
CSA Certified
File No. LR92374
UL Recognized
File No. E68961
Available as one piece only (replacement LEDs are not available).
Miniature Pilot Lights Miniature ø8-16mm AP Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A5-211
A5
Switches & Pilot Devices
Part Numbers: AP Miniature Pilot Lights
Part Numbers: Optional AC Adaptors and DC-DC Converters (for AP2 and AP6 only)
Appearance Lens Style Operating Voltage Part Numbers
AP8 Series - Ø 8mm Dome 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP8M266-➁
AP8M211-➁
AP8M222-➁
Flat 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP8M166-➁
AP8M111-➁
AP8M122-➁
AP1 Series - Ø 10mm
Dome 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP1M266-➁
AP1M211-➁
AP1M222-➁
Flat 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP1M166-➁
AP1M111-➁
AP1M122-➁
AP2 Series - Ø 12mm
Dome 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP2M266-➁
AP2M211-➁
AP2M222-➁
Flat 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP2M166-➁
AP2M111-➁
AP2M122-➁
AP6 Series - Ø 16mm
Dome 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP6M266-➁
AP6M211-➁
AP6M222-➁
Flat 6V DC +/- 5%
12V DC +/- 10%
24V DC +/- 10%
AP6M166-➁
AP6M111-➁
AP6M122-➁
Appearance Style Voltage
Part Numbers
Used with
AP2 Series Used with
AP6 Series
AC
Adaptor 110/120V AC
220/240V AC AP2-0126D
AP2-0246D AP6-0126D
AP6-0246D
DC-DC
Converter 110V DC
(90–140V DC) AP2-016DD AP6-016DD
Miniature Pilot Lights (Assembled)
➁ Color Code
Color Code
Amber A
Green G
Red R
White W
Yellow Y
1.In place of
➁
, specify the color code.
2.For dimensions, see page A5-212
3.For accessories, see page A5-212.
Secondary Voltage = 6V
1
.Optiona
l
A
C a
d
aptors an
d
DC-DC converters snap onto t
h
e
b
ac
k
o
f
A
P
2
or
A
P
6
pi
l
ot
l
ig
h
ts.
2. AC Adaptors and DC-DC Converters step down to 6V.
3. For dimensions, see page A5-213.
Miniature ø8-16mm AP Series Miniature Pilot Lights
A5-212 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC
A5
Switches & Pilot Devices
Appearance Description Used With Part Number
Locking Ring Wrench
Made of metal. Used for tightening plastic lock-
ing ring during installation. Tightening torque
should not exceed 3kgf-cm
Ø 16mm units MT-001
Ø 12mm units MT-002
Ø 10mm units MT-003
Ø 8mm units MT-004
Mounting Hole Plug
Made of rubber. Fills unused mounting holes to
provide IP65 protection
Unused 8mm panel cutouts AL-B8
Unused 10mm panel cutouts AL-B1
Unused 12mm panel cutouts AL-B2
Unused 16mm panel cutouts AL-B6
Transformer Removal Tool AP2 & AP6 snap on transformer & DC-DC
converter MT-100
Replacement Lenses
Lenses (included with all units).
AP1M Flat AP1M-L1-➁
AP1M Dome AP1M-L2-➁
AP2M Flat AP2M-L1-➁
AP2M Dome AP2M-L2-➁
AP6M Flat AP6M-L1-➁
AP6M Dome AP6M-L2-➁
Replacement Engraving Inserts
Allow legends under flat lenses (included with all
flat lens models).
AP1M Flat AP1M-P1-W
AP2M Flat AP2M-P1-W
AP6M Flat AP6M-P1-W
Accessories — AP Series
In place of
➁
, specify the Lens Color Code.
➁ Lens Color Code
Color Code
Amber A
Green G
Red R
White W
Yellow Y
Miniature Pilot Lights Miniature ø8-16mm AP Series
www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC A5-213
A5
Switches & Pilot Devices
Pilot Lights (AP Series)
Style AP8 AP1 AP2 AP6
Flat Dome Flat Dome Flat Dome w/ Adaptor
or Converter Flat Dome w/ Adaptor
or Converter
Panel Cut-out Ø 0.319" (+0.0118, –0)
8.1mm (+0.3, –0) Ø 0.398" (+0.0118, –0)
10.1mm (+0.3, –0) Ø 0.480" (+0.0118, –0) 12.2mm (+0.3, –0) Ø 0.638" (+0.0118, –0) 16.2mm (+0.3, –0)
Outside
Dimension Ø 0.386" (9.8mm) Ø 0.472" (12mm) Ø 0.551" (14mm) ❑ 0.709" (18mm) Ø 0.709" (18mm) ❑ 0.709" (18mm)
Dimensions — AP Series
Gasket
Panel Cut-out
Round Flush
Round Extended
+0.2
0
ø15.6
ø18
5.5
21.5
29.5
7
8
Panel Thickness: 0.8 to 6 mm
1.52.2
ø16.2
ø15.6
ø18
5.5
13.5
9.5
+
-
M3 terminal
screw
When using the AC adapter unit
(When using the DC-DC converter unit) AC adapter unit
(or DC-DC converter unit)
X1
X2
71 58.7 18
18
1.3
+ Terminal
– Terminal
TOP
Gasket
Panel Cut-out
Round Flush
Round Extended
+0.2
0
Panel Thickness: 0.8 to 6 mm
1.5
2.2
ø12
ø14
5.5
21.5
29.5
5
ø12
ø14
5.5
11.5
9.5
ø12.2
+-
TOP
When using the AC adapter unit
(When using the DC-DC converter unit) M3 terminal
screw
AC adapter unit
(or DC-DC converter unit) + Terminal
– Terminal
X1
X2
58.7
71 18
18
1.3
Gasket
Panel Cut-out
Round Flush
Round Extended
+0.2
0
Panel Thickness: 0.8 to 6 mm
1.52.2
5.5
21.5 8
29.5
ø10
ø12
4
ø10.1
ø12
ø10
5.5
10
9.5
2.8
-
+
Gasket
Panel Cut-out
Round Flush
Round Extended
+0.2
0
Panel Thickness: 0.8 to 6 mm
1.5
2.2
5.5
21.5 8
29.5
5.5
9.5
ø8
ø9.8
8.5
ø8
ø9.8
ø8.1
32.8
