Filename: tfs 1590.doc Version 1.1 02.06.2004
VI TELEFILTER Preliminary specification TFS 1590 3/5
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock: 500g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature: -55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow): reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
Packing
Tape & Reel: IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel: 9000
reel of empty components at start: min. 300 mm
reel of empty components at start including leader: min. 500 mm
trailer: min. 300 mm
G
Do
W
Ct
F E
G
D1
P2
P1
Po
Bo
Ao
Pull Off Direction
PIN MarkerTyp
Date Code
Ko
t
Tape (all dimensions in mm)
W : 8,00 ± 0,3
Po : 4,00 ± 0,1
Do : 1,50 +0,1/-0
E : 1,75 ± 0,1
F : 3,50 ± 0,05
G(min) : 0,75
P2 : 2,00 ± 0,05
P1 : 4,00 ± 0,1
D1(min) : 1,50
o : 3,25 ± 0,1
Bo : 3,25 ± 0,1
Ct : 5,5 ± 0,1
AC
N
W1
W2
Reel (all dimensions in mm)
: 330
W1 : 8,4 +1,5/-0
W2(max) : 14,4
N(min) : 50
C : 13,0 +0,5/-0,2
The minimum bending radius is 45 mm.