Type MM and ML Precision Film Resistors High Temperature Resistors for Geophysical, Industrial, and Military Requirements Type MM and ML resistors have a proven performance history in industrial and military applications. Utilizing our proven Micronox (R) resistance films, these resistors are available with power ratings up to 1 Watt and resistance values to 10 Megohms. These resistors are ideal for applications requiring tolerances as close as 0.1% and extended life stability of 0.1% per 1,000 hours. Some models of Type MM and ML resistors are manufactured with Caddock's Non-Inductive Design that provides for neighboring lines to carry current in opposite directions. This efficient non-inductive construction is accomplished without derating of any performance advantages. Type MM features: * Max. Operating Temperature to +275C. * High Power Rating at +125C. * TC of 50 ppm/C from -15C to +105C. * Non-Inductive Performance Available. N Type ML features: * TC of 50 ppm/C from -15C to +105C. * Non-Inductive Performance Available. Caddock's Non-Inductive Design Max. Voltage Oper. Temp. (Max.) Model No. Wattage MM112 0.12 200 275C MM125 0.25 200 275C Dielect. Strength Resistance Dimensions in inches and (millimeters) Min. Max. 400 45 500 K 500 30 1 Meg MM152 0.4 300 275C 750 30 2 Meg MM177 0.6 500 275C 750 45 5 Meg MM215 1.0 800 275C 1,000 45 10 Meg ML104 0.08 200 175C 400 50 300 K ML114 0.15 200 175C 500 50 500 K ML124 0.25 300 175C 750 50 ML131 0.4 500 175C 750 50 1 Meg ML181 0.6 600 175C 750 50 5 Meg 600 K A B C .160 .010 (4.06 .26) .26) .065 .010 (1.65 .26) .26) .018 .004 (.48 .10) .10) .250 .020 (6.35 .51) .51) .094 .006 (2.39 .15) .15) .025 .002 (.64 .05) .05) .188 .020 (4.78 .51) .51) .070 .015 (1.78 .38) .38) .313 .020 (7.95 .51) .51) .094 .006 (2.39 .15) .15) .020 .002 (.51 .05) .05) .025 .002 (.64 .05) .05) .400 .020 (10.16 .51) .160 .010 (4.06 .26) .150 .010 (3.81 .26) .065 .010 (1.65 .26) .188 .020 (4.78 .51) .250 .020 (6.35 .51) .070 .015 (1.78 .38) .094 .006 (2.39 .15) .020 .002 (.51 .05) .025 .002 (.64 .05) .400 .020 (10.16 .51) .150 .010 (3.81 .26) .025 .002 (.64 .05) .313 .020 (7.95 .51) .51) .094 .006 (2.39 .15) .15) .025 .002 (.64 .05) .018 .004 (.48 .10) .025 .002 (.64 .05) .05) Models with low inductance construction are in shaded areas. Models with Caddock's Non-Inductive Resistance Pattern are in non-shaded areas. Replacement Notes: Model Model Model Model Model MM216 MM217 MM224 MM225 MM236 replaced replaced replaced replaced replaced by by by by by MS221 MS223 MS244 MS245 MS260 Ordering Information: Model Number: Resistor Value: Note: Model Model Model Model Model ML212 ML213 ML218 ML219 ML226 replaced replaced replaced replaced replaced ML124 - 20.0K - 1% by by by by by MS221 MS223 MS244 MS245 MS260 (c) 2006 Caddock Electronics, Inc. MM 125, ML114 MM 152, ML124 MM177, ML131 MM215, ML181 Specifications: Resistance Tolerance: 1% (tolerances to 0.1% on special order). Temperature Coefficient: 50 ppm/C referenced to +25C, R taken at -15C and +105C. Insulation Resistance: 10,000 Megohms, min. Overload/Overvoltage: 5 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds, R 0.5% max. or 0.5 ohm max., whichever is greater. Thermal Shock: Mil-Std-202, Method 107, Cond. F, R 0.2% max. or 0.5 ohm max., whichever is greater. Moisture Resistance: Mil-Std-202, Method 106, R 0.5% max. or 0.5 ohm max., whichever is greater. Loadlife: 1,000 hours at +125C at rated power, not to exceed rated voltage, R 0.5% max. or 0.5 ohm max., whichever is greater. Solderable leads Encapsulation: Transfer Molded. B A 1.500 .125 (38.10 3.18) C DIMENSIONS IN INCHES AND (MILLIMETERS) Tolerance The MM and ML resistors are intended for high performance electronics applications that are outside the scope of the RoHS directive. Contact Caddock Applications Engineering for an RoHS compliant alternative. Applications Engineering 17271 North Umpqua Hwy. Roseburg, Oregon 97470-9422 Phone: (541) 496-0700 Fax: (541) 496-0408 MM 112, ML104 Derating Curve: 100 80 RATED POWER OR 60 RATED VOLTAGE, % 40 e-mail: caddock@caddock.com * web: www.caddock.com For Caddock Distributors listed by country see caddock.com/contact/dist.html A - ML B A B - MM 20 0 25 75 125 175 225 AMBIENT TEMPERATURE, C 275 Sales and Corporate Office 1717 Chicago Avenue Riverside, California 92507-2364 Phone: (951) 788-1700 Fax: (951) 369-1151 IL-124.1206