Ordering number : EN*A0926A 1HP04CH Advance Information http://onsemi.com P-Channel Small Signal MOSFET 100V, 170mA, 18, Single CPH3 Features 4V drive Protection diode in Halogen free compliance Specifications Absolute Maximum Ratings at Ta = 25C Parameter Symbol Conditions Value Unit Drain to Source Voltage VDSS 100 Gate to Source Voltage VGSS 20 V Drain Current (DC) ID 170 mA 680 mA Drain Current (Pulse) IDP PW10s, duty cycle1% Power Dissipation PD When mounted on ceramic substrate (900mm20.8mm) Junction Temperature Tj Storage Temperature Tstg V 0.6 W 150 C 55 to +150 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Thermal Resistance Ratings Parameter Symbol Junction to Ambient When mounted on ceramic substrate (900mm20.8mm) RJA Value 208 Unit C /W Electrical Characteristics at Ta 25C Value Parameter Symbol Conditions Unit min typ max 100 Drain to Source Breakdown Voltage V(BR)DSS ID=1mA, VGS=0V Zero-Gate Voltage Drain Current IDSS VDS=100V, VGS=0V Gate to Source Leakage Current IGSS VGS=16V, VDS=0V Gate Threshold Voltage VGS(th) VDS=10V, ID=100A Forward Transconductance gFS VDS=10V, ID=80mA 170 RDS(on)1 ID=80mA, VGS=10V 12.5 18 RDS(on)2 ID=40mA, VGS=4V 14 21 Static Drain to Source On-State Resistance Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss V 1.2 A 10 A 2.6 14 VDS=20V, f=1MHz 1 V mS pF 2.8 pF 0.9 pF Continued on next page. This document contains information on a new product. Specifications and information herein are subject to change without notice. ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. Semiconductor Components Industries, LLC, 2014 April, 2014 42814TKIM/82907TIIM TC-00000808 PE No.A0926-1/5 1HP04CH Continued from preceding page. Value Parameter Symbol Conditions Unit min typ max Turn-ON Delay Time td(on) 21 ns Rise Time tr 18 ns Turn-OFF Delay Time td(off) 200 ns Fall Time tf 81 ns Total Gate Charge Qg 0.9 nC Gate to Source Charge Qgs 0.14 nC Gate to Drain "Miller" Charge Qgd 0.27 nC Forward Diode Voltage VSD See specified Test Circuit VDS=50V, VGS=10V, ID=170mA 0.88 IS=170mA, VGS=0V 1.2 V Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Ordering & Package Information Packing Type:TL Device Package Shipping note 1HP04CH-TL-W CPH3, SC-59 SOT-23, TO-236 3,000 pcs. / reel Pb-Free and Halogen Free Electrical Connection Marking Switching Time Test Circuit No.A0926-2/5 1HP04CH No.A0926-3/5 1HP04CH No.A0926-4/5 1HP04CH Package Dimensions 1HP04CH-TL-W CPH3 CASE 318BA ISSUE O unit : mm 1: Gate 2: Source 3: Drain 2.4 1.4 Recommended Soldering Footprint 0.6 0.95 0.95 Note on usage : Since the 1HP04CH is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A0926-5/5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: 1HP04CH-TL-W