VS-30WQ04FNPbF
www.vishay.com Vishay Semiconductors
Revision: 20-May-15 1Document Number: 94198
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
High Performance Schottky Rectifier, 3.5 A
FEATURES
Popular D-PAK outline
Small foot print, surface mountable
Low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
The VS-30WQ04FNPbF surface mount Schottky rectifier
has been designed for applications requiring low forward
drop and small foot prints on PC board. Typical applications
are in disk drives, switching power supplies, converters,
freewheeling diodes, battery charging, and reverse battery
protection.
PRODUCT SUMMARY
Package D-PAK (TO-252AA)
IF(AV) 3.5 A
VR40 V
VF at IFSee Electrical table
IRM 24 mA at 125 °C
TJ max. 150 °C
Diode variation Single die
EAS 8 mJ
Anode
13
Base
cathode
Anode
4, 2
D-PAK (TO-252AA)
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
IF(AV) Rectangular waveform 3.5 A
VRRM 40 V
IFSM tp = 5 μs sine 500 A
VF3 Apk, TJ = 125 °C 0.49 V
TJ-40 to +150 °C
VOLTAGE RATINGS
PARAMETER SYMBOL VS-30WQ04FNPbF UNITS
Maximum DC reverse voltage VR40 V
Maximum working peak reverse voltage VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
See fig. 5 IF(AV) 50 % duty cycle at TC = 135 °C, rectangular waveform 3.5
A
Maximum peak one cycle
non-repetitive surge current
See fig. 7
IFSM
5 μs sine or 3 μs rect. pulse Following any rated load
condition and with rated
VRRM applied
500
10 ms sine or 6 ms rect. pulse 80
Non-repetitive avalanche energy EAS TJ = 25 °C, IAS = 1 A, L = 16 mH 8.0 mJ
Repetitive avalanche current IAR
Current decaying linearly to zero in 1 μs
Frequency limited by TJ maximum VA = 1.5 x VR typical 1.0 A
VS-30WQ04FNPbF
www.vishay.com Vishay Semiconductors
Revision: 20-May-15 2Document Number: 94198
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse width < 300 μs, duty cycle < 2 %
Note
(1) thermal runaway condition for a diode on its own heatsink
ELECTRICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum forward voltage drop
See fig. 1 VFM (1)
3 A TJ = 25 °C 0.53
V
6 A 0.67
3 A TJ = 125 °C 0.49
6 A 0.62
Maximum reverse leakage current
See fig. 2 IRM (1) TJ = 25 °C VR = Rated VR
2mA
TJ = 125 °C 24
Threshold voltage VF(TO) TJ = TJ maximum 0.34 V
Forward slope resistance rt37.33 m
Typical junction capacitance CTVR = 5 VDC (test signal range 100 kHz to 1 MHz), 25 °C 189 pF
Typical series inductance LSMeasured lead to lead 5 mm from package body 5.0 nH
Maximum voltage rate of change dV/dt Rated VR10 000 V/μs
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction and
storage temperature range TJ (1), TStg -40 to +150 °C
Maximum thermal resistance,
junction to case RthJC
DC operation
See fig. 4 4.7 °C/W
Approximate weight 0.3 g
0.01 oz.
Marking device Case style D-PAK (similar to TO-252AA) 30WQ04FN
dPtot
dTJ
------------- 1
RthJA
--------------<
VS-30WQ04FNPbF
www.vishay.com Vishay Semiconductors
Revision: 20-May-15 3Document Number: 94198
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
1
100
IF - Instantaneous Forward Current (A)
VFM - Forward Voltage Drop (V)
0.4 0.8 1.2 1.6 2.0 2.4 2.80
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
10
0.001
0.01
0.1
1
10
100
IR - Reverse Current (mA)
VR - Reverse Voltage (V)
5 101520253035400
TJ = 150 °C
TJ = 125 °C
TJ = 100 °C
TJ = 75 °C
TJ = 50 °C
TJ = 25 °C
10
100
1000
CT - Junction Capacitance (pF)
VR - Reverse Voltage (V)
10 15 20 25 30 35 40 45
05
TJ = 25 °C
0.1
1
10
0.00001 0.0001 0.001 0.01 0.1
t1 - Rectangular Pulse Duration (s)
ZthJC - Thermal Impedance (°C/W)
1
Single pulse
(thermal resistance)
PDM
t1
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
VS-30WQ04FNPbF
www.vishay.com Vishay Semiconductors
Revision: 20-May-15 4Document Number: 94198
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current
Fig. 6 - Forward Power Loss Characteristics
Fig. 7 - Maximum Non-Repetitive Surge Current
Note
(1) Formula used: TC = TJ - (Pd + PdREV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR
110
115
120
125
135
140
145
150
130
155
Allowable Case Temperature (°C)
IF (AV) - Average Forward Current (A)
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.00 0.5 1.0
DC
See note (1)
Square wave (D = 0.50)
80 % rated VR applied
0
0.5
1.0
1.5
2.0
2.5
3.0
Average Power Loss (W)
IF (AV) - Average Forward Current (A)
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.00 0.5 1.0
DC
RMS limit
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
10
100
1000
I
FSM
- Non- Repetitive Surge Current (A)
t
p
- Square Wave Pulse Duration (µs)
100 1000 10 00010
At any rated load condition
and with rated VRRM applied
following surge
VS-30WQ04FNPbF
www.vishay.com Vishay Semiconductors
Revision: 20-May-15 5Document Number: 94198
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95016
Part marking information www.vishay.com/doc?95059
Packaging information www.vishay.com/doc?95033
SPICE model www.vishay.com/doc?95288
www.vishay.com/doc?95630
2- Current rating (3.5 A)
1- Vishay Semiconductors product
3- Package identifier:
W = D-PAK
4- Schottky “Q” series
5- Voltage rating (04 = 40 V)
- FN = TO-252AA (D-PAK)
6
- PbF = Lead (Pb)-free
8
7- None = Tube (50 pieces)
TR = Tape and reel
TRR = Tape and reel (right oriented)
TRL = Tape and reel (left oriented)
Device code
51 32 4 6 7 8
30VS- W Q 04 FN TRL PbF
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
VS-30WQ04FNPBF VS-30WQ04FNTRPBF VS-30WQ04FNTRLPBF VS-30WQ04FNTRRPBF 30WQ04FN
30WQ04FNTR 30WQ04FNTRL 30WQ04FNTRR