ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington arrays Datasheet - production data Description The ULN2801A, ULN2802A, ULN2803A and ULN2804A each contain eight Darlington transistors with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the OFF state. Outputs may be paralleled for higher current capability. DIP-18 Features Eight Darlington transistors with common emitters Four versions are available to simplify interfacing to standard logic families: the ULN2801A is designed for general purpose applications with a current limit resistor; the ULN2802A has a 10.5 k input resistor and Zener for 14-25 V PMOS; the ULN2803A has a 2.7 k input resistor for 5 V TTL and CMOS; the ULN2804A has a 10.5 k input resistor for 6-15 V CMOS. All types are supplied in an 18-lead plastic DIP with a copper lead form and feature the convenient input-opposite-output pinout to simplify board layout. Output current to 500 mA Output voltage to 50 V Integral suppression diodes Versions for all popular logic families Output can be paralleled Inputs pinned opposite outputs to simplify board layout Table 1. Device summary Order codes Package ULN2801A ULN2802A DIP-18 ULN2803A ULN2804A June 2018 This is information on a product in full production. DocID1536 Rev 4 1/14 www.st.com Contents ULN2801A, ULN2802A, ULN2803A, ULN2804A Contents 1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 DocID1536 Rev 4 ULN2801A, ULN2802A, ULN2803A, ULN2804A 1 Diagram Diagram Figure 1. Schematic diagrams For ULN2801A (each driver for PMOS-CMOS) For ULN2803A (each driver for 5V, TTL/CMOS) For ULN2802A (each driver for 14-15V PMOS) For ULN2804A (each driver for 6-15V CMOS/PMOS) DocID1536 Rev 4 3/14 14 Pin configuration 2 ULN2801A, ULN2802A, ULN2803A, ULN2804A Pin configuration Figure 2. Pin connections (top view) 4/14 DocID1536 Rev 4 ULN2801A, ULN2802A, ULN2803A, ULN2804A 3 Maximum ratings Maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VO Output voltage 50 V VI Input voltage (for ULN2802A - ULN2803A - ULN2804A) 30 V IC Continuous collector current 500 mA IB Continuous base current 25 mA Power Dissipation (one Darlington pair) 1 PTOT TA TSTG TJ W Power Dissipation (total package) 2.25 Operating ambient temperature range - 20 to 85 C Storage temperature range - 55 to 150 C Junction temperature -20 to 150 C Table 3. Thermal data Symbol RthJA Parameter Thermal resistance junction-ambient DocID1536 Rev 4 Value Unit 55 C/W 5/14 14 Electrical characteristics 4 ULN2801A, ULN2802A, ULN2803A, ULN2804A Electrical characteristics TA = 25 C unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter Test condition Min. Typ. Max. Unit VCE = 50V ICEX Output leakage current Collector-emitter saturation VCE(SAT) voltage (Figure 5) II(ON) II(OFF) VI(ON) Input current (Figure 6) TA = 70 C, VCE = 50 V (Figure 3) 50 TA = 70C for ULN2802A, VCE = 50 V, VI = 6 V (Figure 4) 100 TA = 70C for ULN2804A, VCE = 50 V, VI = 1 V (Figure 4) 500 IC = 100 mA, IB = 250 A 0.9 1.1 IC = 200 mA, IB = 350 A 1.1 1.3 IC = 350 mA, IB = 500 A 1.3 1.6 for ULN2802A, VI = 17 V 0.82 1.25 for ULN2803A, VI = 3.85 V 0.93 1.35 for ULN2804A, VI = 5 V VI = 12 V 0.35 0.5 1 1.45 Input current (Figure 7) TA = 70 C, IC = 500 A Input voltage (Figure 8) VCE= 2V, for ULN2802A IC = 300 mA for ULN2803A IC = 200 mA IC = 250 mA IC = 300 mA for ULN2804A IC = 125 mA IC = 200 mA IC = 275 mA IC = 350 mA hFE DC Forward current gain (Figure 5) CI Input capacitance tPLH Turn-on delay time tPHL for ULN2801A, VCE = 2 V, IC = 350 mA A V mA 50 65 A 13 2.4 2.7 3 V 5 6 7 8 1000 15 25 pF 0.5 VI to 0.5VO 0.25 1 s Turn-off delay time 0.5 VI to 0.5VO 0.25 1 s Clamp diode leakage current (Figure 9) VR = 50 V 50 IR TA = 70 C, VR = 50 V 100 VF Clamp diode forward voltage (Figure 10) 6/14 IF = 350 mA DocID1536 Rev 4 A 1.7 2 V ULN2801A, ULN2802A, ULN2803A, ULN2804A 5 Test circuits Test circuits Figure 3. Output leakage current Figure 4. Output leakage current (for ULN2802A only) Figure 5. Collector-emitter saturation voltage Figure 6. Input current (ON) Figure 7. Input current (OFF) Figure 8. Input voltage DocID1536 Rev 4 7/14 14 Test circuits ULN2801A, ULN2802A, ULN2803A, ULN2804A Figure 9. Clamp diode leakage current 8/14 Figure 10. Clamp diode forward voltage DocID1536 Rev 4 ULN2801A, ULN2802A, ULN2803A, ULN2804A 6 Typical performance characteristics Typical performance characteristics Figure 11. Collector current as a function of saturation voltaget Figure 12. Collector current as a function of input current Figure 13. Allowable average power dissipation Figure 14. Peak collector current as a function as a function of TA of duty cycle DocID1536 Rev 4 9/14 14 Typical performance characteristics ULN2801A, ULN2802A, ULN2803A, ULN2804A Figure 15. Peak collector current as a function of duty cycle Figure 16. Input current as a function of input voltage (for ULN2802A) Figure 17. Input current as a function of input voltage (for ULN2804A) Figure 18. Input current as a function of input voltage (for ULN2803A) 10/14 DocID1536 Rev 4 ULN2801A, ULN2802A, ULN2803A, ULN2804A 7 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. DocID1536 Rev 4 11/14 14 Package mechanical data ULN2801A, ULN2802A, ULN2803A, ULN2804A Table 5. DIP-18 mechanical data mm. Dim. Min. a1 0.254 B 1.39 Typ. 1.65 b 0.46 b1 0.25 D 23.24 E 8.5 e 2.54 e3 20.32 F 7.1 I 3.93 L 3.3 Z 1.27 Figure 19. DIP-18 package dimensions 12/14 Max. DocID1536 Rev 4 1.59 ULN2801A, ULN2802A, ULN2803A, ULN2804A 8 Revision history Revision history Table 6. Document revision history Date Revision Changes 18-Sep-2003 1 First release 10-Mar-2010 2 Updated package mechanical data 19-Nov-2012 3 Modified input voltage values Table 4 on page 6. 27-Jun-2018 4 Updated: II(ON) test condition in Table 4: Electrical characteristics. DocID1536 Rev 4 13/14 14 ULN2801A, ULN2802A, ULN2803A, ULN2804A IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2018 STMicroelectronics - All rights reserved 14/14 DocID1536 Rev 4