S-Beam Tension and Compression Load Cells Models 151 and 152 32314675 Issue 1 Datasheet FEATURES * * * * * * * * Tension and compression load/force measurement Wide capacity range: 50 N to 50K N Accuracy: 0.03 %FS Metric thread One-piece, nickel-plated alloy steel or aluminum construction Overload capacity: 150 %FS IP67 sealing Integrated cable: 1,5 m [4.92 ft] POTENTIAL APPLICATIONS DESCRIPTION Honeywell Models 151/152 S-Beam Load Cells combine compact structure with enhanced precision and rigorous testing to form a reliable and durable tension and compression force transducer. The one-piece design achieves an accuracy of 0.03 % full scale. The lower capacity (50 N and 100 N) Models 152 (Order Code CA152) are constructed from aluminum; whereas higher capacity load cells Models 151 (250 N to 50K N) are made with alloy steel (Order Code CA151). (See page 3 for Order Guide information.) Models 151/152 load cells help keep equipment and specimens safe, as well as minimize test time and maintenance through reliable force measurement. VALUE TO CUSTOMERS * Wide capacity range: 50 N to 50K N * Standard accuracy of 0.03 %FS * 5-points calibration in tension and compression DIFFERENTIATION * * * * Tension and compression calibration 5-points calibration data Mechanical shock tested 50 g peak to IEC 60068-2-27 Vibration tested to IEC 60068-2-6 Sensing and Productivity Solutions * Medical - Needle and syringe testing * Industrial - Universal test machine - Material test machine PORTFOLIO Honeywell offers a wide portfolio of load cell platform designs constructed of stainless steel, carbon steel, or aluminum. These platforms include low profile/pancake, miniature and subminiature, fatigue rated, canister, donut thru-hole style, rodend, beam style, and loadpin load cells. S-Beam Tension and Compression Load Cell, Models 151 & 152 Table 1. Electrical Specifications Characteristic Parameter Strain gage type Bonded foil Excitation voltage (acceptable) 5 V ~10 V Insulation resistance >5,000 M @ 50 Vdc Bridge resistance (input) >385 Bridge resistance (output) 350 3 Zero balance 1 %FS Cable length 1,5 m [4.92 ft] Table 2. Performance Specifications Characteristic Parameter Rated capacity 50 N ~ 50K N Non-linearity (typ.) 0.03 %FS Hysteresis (typ.) 0.03 %FS Non-repeatability 0.03 %FS Zero balance 1 %FS Output @ rated capacity (FS) 2.0 mV/V 1.0 % Operation Tension and compression Standard calibration Tension (+) and compression (-) Calibration report 5-points calibration data Vibration IEC 60068-2-6 Shock IEC 60068-2-27 Safe overload 150 % of rated capacity Table 3. Environmental Specifications Characteristic Parameter Temperature, operating -20 C to 80 C [-4 F to 176 F] Temperature, compensated -10 C to 40 C [14 F to 104 F] Temperature effect, zero 0.003 %FS/C Temperature effect, span 0.003 %reading/C Protection level IP67 Table 4. Mechanical Specifications Characteristic Parameter Static overload capacity 150 % of rated capacity Material (order code) Alloy steel (CA151) or aluminum (CA152) Table 5. Wiring Color/Codes Color 2 Designation Red (+) Excitation Black (-) Excitation Green (+) Output White (-) Output Brown Shield drain sensing.honeywell.com S-Beam Tension and Compression Load Cell, Models 151 & 152 Figure 1. Product Nomenclature For example, CA151NL,1BB,2U,6F,9A,30B defines a Model 151 S-Beam Load Cell, 250 N range, -10 C to 40 C [14 F to 104 F] temperature compensation, unamplified, integral PVC cable, 10 point, tension and compression output. NL 1BB 2U 6F 9A 30B Range Temperature Compensation Internal Amplifiers Electrical Termination Special Calibration Special Calibration (Load Cells Only) CA151 Receiver type S-Beam Series Load Cell Model 151A CA151 (order code) Model 152B CA152 (order code) A made from alloy steel. For use ONLY with ranges 250 N and greater. B made from aluminum. For use ONLY with ranges 50 N and 100 N. MK 50 N ML 100 N NL 250 N MY 500 N MN 1000 N MO 2000 N MQ 5000 N MR 10K N MS 20K N ZN 30K N MT 50K N -10 C to 40 C 1BB [14 F to 104 F] temp. comp. 2U Unamplified 6F Integral cable, PVC 1,5 m [4.92 ft] 9A 10 point, (5 up/5 down) 20 % increments 30B Tension and compression (+, -) output Table 6. Order Guide Range Description Order Code Honeywell Part Number 50 N Model 152 50 N CA152MK,1BB,2U,6F,30B 060-P662-01 100 N Model 152 100 N CA152ML,1BB,2U,6F,30B 060-P662-02 250 N Model 151 250 N CA151NL,1BB,2U,6F,30B 060-P663-01 500 N Model 151 500 N CA151MY,1BB,2U,6F,30B 060-P663-02 1000 N Model 151 1,000 N CA151MN,1BB,2U,6F,30B 060-P664-01 2000 N Model 151 2,000 N CA151MO,1BB,2U,6F,30B 060-P665-01 5000 N Model 151 5,000 N CA151MQ,1BB,2U,6F,30B 060-P665-02 10K N Model 151 10,000 N CA151MR,1BB,2U,6F,30B 060-P665-03 20K N Model 151 20,000 N CA151MS,1BB,2U,6F,30B 060-P666-01 30K N Model 151 30,000 N CA151ZN,1BB,2U,6F,30B 060-P666-02 50K N Model 151 50,000 N CA151MT,1BB,2U,6F,30B 060-P666-03 Sensing and Productivity Solutions 3 S-Beam Tension and Compression Load Cell, Models 151 & 152 DIMENSIONAL DRAWINGS Figure 2. Model 151 & 152 Dimensions Wiring Codes Color Designation Red (+) Excitation Black (-) Excitation Green (+) Output White (-) Output Brown Shield Drain Capacity (N) Model Case Material A (Reference) B (Reference) C T L M W 50 152 aluminum 68 mm [2.68 in] 24,5 mm [0.96 in] 9 mm [0.35 in] 18 mm [0.71 in] 70 mm [2.76 in] M8 x 1.25/ thru 56 mm [2.20 in] 100 152 aluminum 68 mm [2.68 in] 24,5 mm [0.96 in] 9 mm [0.35 in] 18 mm [0.71 in] 70 mm [2.76 in] M8 x 1.25/ thru 56 mm [2.20 in] 250 151 alloy steel 62,5 mm [2.46 in] 18,5 mm [0.73 in] 6,35 mm [0.25 in] 12,7 mm [0.50 in] 63,5 [2.5 in] M6 x 1/thru 50,8 mm [2.0 in] 500 151 alloy steel 62,5 mm [2.46 in] 18,5 mm [0.73 in] 6,35 mm [0.25 in] 12,7 mm [0.50 in] 63,5 [2.5 in] M6 x 1/thru 50,8 mm [2.0 in] 1000 151 alloy steel 62,5 mm [2.46 in] 25,4 mm [1.0 in] 9,5 mm [0.37 in] 19 mm [0.75] 76,2 mm [3.0 in] M10 x 1.5/ thru 50,8 mm [2.0 in] 2000 151 alloy steel 62,5 mm [2.46 in] 25,4 mm [1.0 in] 9,5 mm [0.37 in] 19 mm [0.75] 76,2 mm [3.0 in] M12 x 1.75/ thru 50,8 mm [2.0 in] 5000 151 alloy steel 62,5 mm [2.46 in] 25,4 mm [1.0 in] 9,5 mm [0.37 in] 19 mm [0.75] 76,2 mm [3.0 in] M12 x 1.75/ thru 50,8 mm [2.0 in] 10k 151 alloy steel 62,5 mm [2.46 in] 31,5 mm [1.24 in] 12,7 mm [0.50 in] 25,4 mm [1.0 in] 76,2 mm [3.0 in] M12 x 1.75/ thru 50,8 mm [2.0 in] 20k 151 alloy steel 86 mm [3.39 in] 31,5 mm [1.24 in] 19 mm [0.74 in] 25,4 mm [1.0 in] 108 mm [4.25 in] M18 x 1.5/ thru 76,2 mm [3.0 in] 30k 151 alloy steel 86 mm [3.39 in] 31,5 mm [1.24 in] 19 mm [0.74 in] 25,4 mm [1.0 in] 108 mm [4.25 in] M18 x 1.5/ thru 76,2 mm [3.0 in] 50k 151 alloy steel 86 mm [3.39 in] 37,5 [1.48 in] 25,4 mm [1.0 in] 31,8 mm [1.25 in] 108 mm [4.25 in] M18 x 1.5/ thru 76,2 mm [3.0 in] 4 sensing.honeywell.com m WARNING ADDITIONAL MATERIALS The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product line guide * Product range guide * Application note: Tension and Compression S-Beam Load PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Cells in Industrial and Medical Applications m WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Warranty/Remedy Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honey- Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. well's test and measurement products, call +1-815-235-6847 or 1-800-537-6945, visit measurementsensors.honeywell.com, or e-mail inquiries to info.tm@honeywell.com Honeywell Sensing and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 honeywell.com 32314675-1-EN IL50 GLO April 2016 (c) 2016 Honeywell International Inc. All rights reserved.