CO LO & MP LI GE AN N T FR EE Applications Radial Leaded Devices Almost anywhere there is a low voltage power supply and a load to be protected, including: Computers & peripherals General electronics Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* and halogen free** Agency recognition: R11 71800 T ** HA *R oH S Features MF-R Series - PTC Resettable Fuses Electrical Characteristics Ihold Model V max. Volts I max. Amps MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 Initial Resistance Itrip Amperes at 23 C Hold Trip 0.05 0.10 0.10 0.20 0.17 0.34 0.20 0.40 0.25 0.50 0.30 0.60 0.40 0.80 0.50 1.00 0.65 1.30 0.75 1.50 0.90 1.80 0.90 1.80 1.10 2.20 1.35 2.70 1.60 3.20 1.85 3.70 2.50 5.00 2.50 5.00 3.00 6.00 4.00 8.00 5.00 10.00 6.00 12.00 7.00 14.00 8.00 16.00 9.00 18.00 11.00 22.00 Ohms at 23 C Min. Max. 7.3 11.1 2.50 4.50 2.00 3.20 1.50 2.84 1.00 1.95 0.76 1.36 0.52 0.86 0.41 0.77 0.27 0.48 0.18 0.40 0.14 0.31 0.07 0.12 0.10 0.18 0.065 0.115 0.055 0.105 0.040 0.07 0.025 0.048 0.025 0.048 0.020 0.05 0.010 0.03 0.010 0.03 0.005 0.02 0.005 0.02 0.005 0.02 0.005 0.01 0.003 0.01 1 Hour (R1) Max. Time Post-Trip to Trip Resistance Ohms Amperes Seconds at 23 C at 23 C at 23 C Max. 22.0 0.5 5.0 7.50 0.5 4.0 8.00 0.85 3.0 4.40 1.0 2.2 3.00 1.25 2.5 2.10 1.5 3.0 1.29 2.0 3.8 1.17 2.5 4.0 0.72 3.25 5.3 0.60 3.75 6.3 0.47 4.5 7.2 0.22 4.5 5.9 0.27 5.5 6.6 0.17 6.75 7.3 0.15 8.0 8.0 0.11 9.25 8.7 0.07 12.5 10.3 0.07 12.5 10.3 0.08 15.0 10.8 0.05 20.0 12.7 0.05 25.0 14.5 0.04 30.0 16.0 0.03 35.0 17.5 0.03 40.0 18.8 0.02 40.0 20.0 0.014 40.0 20.0 Tripped Power Dissipation Watts at 23 C Typ. 0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50 Environmental Characteristics Operating/Storage Temperature ........................... -40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................ 125 C Passive Aging ....................................................... +85 C, 1000 hours ............................................... 5 % typical resistance change Humidity Aging...................................................... +85 C, 85 % R.H. 1000 hours ............................. 5 % typical resistance change Thermal Shock ..................................................... -40 C to +85 C, 10 times .................................... 10 % typical resistance change Solvent Resistance ............................................... MIL-STD-202, Method 215 ................................... No change Vibration ............................................................... MIL-STD-883C, Method 2007.1,........................... No change Condition A Moisture Sensitivity Level ..................................... 1 ..................................... 6 Test Procedures And Requirements For Model MF-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description Resistance ............................................................ In still air @ 23 C ................................................. Rmin R Rmax Time to Trip ........................................................... 5 times Ihold, Vmax, 23 C ................................... T max. time to trip (seconds) Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning Trip Endurance ..................................................... Vmax, 48 hours..................................................... No arcing or burning UL File Number ..........................................................E174545 E174545, or click here ........................................................... click here WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns follows the prevailing definition of "halogen free" in the industry. Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Additional Features Bulk packaging, tape and reel and Ammo-Pak available on most models MF-R Series - PTC Resettable Fuses Product Dimensions (see next page for outline drawing) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) Packaging options: BULK: All models = 500 pcs. per bag D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Physical Characteristics Style 4 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 2 3 2 2 2 2 2 2 2 2 0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG) Lead Dia. 0.405 (0.016) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.51 (0.020) 0.81 (0.032) 0.51 (0.020) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) 0.81 (0.032) Material Sn/NiCu Sn/NiCu Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu DIMENSIONS: MM (INCHES) TAPE & REEL: MF-R005-MF-R160 12.7 mm device pitch = 3000 pcs. per reel MF-R185-MF-R400 25.4 mm device pitch = 1500 pcs. per reel MF-R500~MF-R1100 25.4 mm device pitch = 1000 pcs. per reel AMMO-PACK: MF-R005-MF-R160 12.7 mm device pitch = 2000 pcs. per pack MF-R185-MF-R400 25.4 mm device pitch = 1000 pcs. per pack MF-R500~MF-R1100 25.4 mm device pitch = 500 pcs. per pack Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. MF-R Series - PTC Resettable Fuses Product Dimensions (see previous page for dimensions) Style 1 Style 2 A E Style 3 A E Style 4 A B B A E B E B D C D D D C C C NOTE: Kinked lead option is available for board standoff. Contact factory for details. NOTE: Also available with straight leads. Contact factory for details. Thermal Derating Chart - Ihold / Itrip (Amps) Model MF-R005 MF-R010 MF-R017 MF-R020 MF-R025 MF-R030 MF-R040 MF-R050 MF-R065 MF-R075 MF-R090 MF-R090-0-9 MF-R110 MF-R135 MF-R160 MF-R185 MF-R250 MF-R250-0-10 MF-R300 MF-R400 MF-R500 MF-R600 MF-R700 MF-R800 MF-R900 MF-R1100 -40 C 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 C 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 C 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 Ambient Operating Temperature 23 C 40 C 50 C 0.05 / 0.10 0.04 / 0.08 0.04 / 0.08 0.10 / 0.20 0.08 / 0.16 0.07 / 0.14 0.17 / 0.34 0.14 / 0.28 0.12 / 0.24 0.20 / 0.40 0.16 / 0.32 0.14 / 0.28 0.25 / 0.50 0.20 / 0.40 0.18 / 0.36 0.30 / 0.60 0.24 / 0.48 0.22 / 0.44 0.40 / 0.80 0.32 / 0.64 0.29 / 0.58 0.50 / 1.00 0.41 / 0.82 0.36 / 0.72 0.65 / 1.30 0.53 / 1.06 0.47 / 0.94 0.75 / 1.50 0.61 / 1.22 0.54 / 1.08 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 0.90 / 1.80 0.73 / 1.46 0.65 / 1.30 1.10 / 2.20 0.91 / 1.82 0.85 / 1.70 1.35 / 2.70 1.12 / 2.24 1.04 / 2.08 1.60 / 3.20 1.33 / 2.66 1.23 / 2.46 1.85 / 3.70 1.54 / 3.08 1.42 / 2.84 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 2.50 / 5.00 2.08 / 4.16 1.93 / 3.86 3.00 / 6.00 2.49 / 4.98 2.31 / 4.62 4.00 / 8.00 3.32 / 6.64 3.08 / 6.16 5.00 / 10.0 4.15 / 8.30 3.85 / 7.70 6.00 / 12.0 4.98 / 9.96 4.62 / 9.24 7.00 / 14.0 5.81 / 11.6 5.39 / 10.7 8.00 / 16.0 6.64 / 13.2 6.16 / 12.3 9.00 / 18.0 7.47 / 14.9 6.93 / 12.7 11.0 / 22.1 9.40 / 18.4 8.80 / 17.6 60 C 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 C 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 85 C 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. MF-R Series - PTC Resettable Fuses Typical Time to Trip at 23 C How to Order MF -R MF 005 -R0 10 MF -R0 MF 17 -R MF 020 -R MF 025 -R MF 030 -R MF 040 -R0 MF 50 -R MF 065 -R MF 075 -R0 90 MF - R 110 - 0 - 99 (R) Multifuse Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - __ = Bulk Packaging without part number suffix option - 0-99 = Bulk Packaging with part number suffix option -2= Tape and Reel without part number suffix option* - 2-99 = Tape and Reel with part number suffix option* - AP = Ammo-Pak* - 0-14 = Kinked leads where straight leads are standard - 0-17 = Straight leads where kinked leads are standard Option Part Number - 99 = RoHS Compliancy As of date code April 1, 2005 all MF-R models are RoHS compliant. The "-99" can be used if a new part number is required to reference the RoHS compliance, but including the "-99" Time to trip (Seconds) 100 10 1 0.1 0.01 for new designs. *Packaged per EIA486-B 0.001 0.1 1 10 100 Typical Part Marking: MF-R005 - R025 Fault Current (Amps) MF -0--R09 9 0 MF -R MF 110 -R1 MF 35 -R MF 160 -R MF 185 -R 250 250, -0 MF -10 -R3 MF 00 -R MF 400 -R MF 500 -R MF 600 -R7 MF 00 -R MF 800 -R MF 900 -R1 100 Represents total content. Layout may vary. PART IDENTIFICATION MANUFACTURER'S TRADEMARK 025 7A S MANUFACTURING LOCATION: S = CHINA DATE CODE: WEEK 1 OF 2017 = 7A (YEAR & WEEK) WEEK 27 OF 2017 = A7 (WEEK & YEAR) Time to trip (Seconds) 100 Typical Part Marking: MF-R030 - R1100 10 Represents total content. Layout may vary. MANUFACTURER'S TRADEMARK 1 PART IDENTIFICATION R250 7180 S 0.1 MANUFACTURING LOCATION: T = TAIWAN S = CHINA DATE CODE: FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR 0.01 0.001 1 10 Fault Current (Amps) 100 MF-R SERIES, REV. AH, 11/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. MF-R, MF-R/90, MF-R/600, & MF-RX, & MF-RX/72 Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC Mark EIA Mark Carrier tape width W W Hold down tape width W0 W4 Dimension Description Hold down tape Dimensions Dimensions Tolerance 18 -0.5/+1.0 (.709) (-0.02/+.039) 11 min. (.433) No protrusion Top distance between tape edges W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold-down tape I2 I2 Sprocket hole pitch P0 P0 Pitch tolerance 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) max. -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) max. max. max. max. max. max. max. max. Not 12.7 (0.5) 20 consecutive 0.3 (.012) 1 (.039) Device pitch: MF-R005-MF-R160, MF-R/90, MF-RX020/72-MF-RX030/72 12.7 (0.5) 0.3 (.012) Device pitch: MF-R185-MF-R400, MF-R/600, MF-RX110-MF-RX375 MF-RX040/72-MF-RX375/72 25.4 (1.0) 0.6 (.024) 0.9 (.035) max. Tape thickness t t Tape thickness with splice: MF-R010-MF-R160, MF-RX110/72-MF-RX185/72 t1 1.5 (.059) max. Tape thickness with splice: MF-R250-MF-R1100, MF-RX110-MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 t1 2.3 (.091) max. Splice sprocket hole alignment 0 Body lateral deviation h h 0 Body tape plane deviation p p 0 0.3 (.012) 1.0 (.039) 1.3 (.051) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. MF-R, MF-R/90, MF-R/600, MF-RX, & MF-RX/72 Series Tape and Reel Specifications IEC Mark EIA Mark Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F Reel width w W2 Reel diameter d a W1 h Arbor hole diameter f c Core diameter: MF-R, MF-RX, MF-R/90 h n Core diameter: MF-R/600 h n Dimension Description Space between less device Box: MF-R, MF-RX, MF-R/90 Box: MF-R/600 Dimensions Dimensions Tolerance 5.08 0.2 (0.2) (0.008) 56.0 max. (2.205) 370.0 max. (14.57) 4.75 3.25 (.187) (.128) 26.0 12.0 (1.024) (.472) 80 max. (3.15) 91 max. (3.58) 62 355 345 nom. (2.44) (14.0) (13.6) 64 372 362 max. (2.52) (14.6) (14.25) Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-R/600 none Empty places per reel: MF-R, MF-RX, MF-R/90 Not Empty places per reel: MF-R/600 0.1 % Taped Component Dimensions Figure 1 p h h max. p Reference plane P1 H1 A L I2 H1 F H0 B W0 I1 P0 D0 H W1 W User direction of feed Cross section A - B Reel Dimensions - Figure 2 t Reel h d User direction of feed Upper side Tape Lower side f h w DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and P[ZHSPH[LZJVSSLJ[P]LS)V\YUZ Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL