1AC-II/1LAC-II VoltAlert The pocket-sized voltage detector Technical Data The next generation VoltAlertTM ac voltage testers from Fluke are easy to use--just touch the tip to a terminal strip, outlet, or cord. When the tip glows red and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits and defective grounds on the factory floor, in the shop, or at home. * The 1AC-II continually tests its battery and its circuit integrity with a periodic double flash visual indication using Fluke VoltbeatTM technology. * The VoltAlertTM Tester (1AC-II and 1LAC-II) is a Category IV --1000 V overvoltage rated product for added user protection, the highest rated of its kind. * Voltage detection of 90 V to 1000 V ac or 200 V to 1000 V ac depending on model, as well as a 24 V to 1000 V ac control circuit model. * It is rugged, reliable, and has a two-year warranty. Specifications Operating principle Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Note: Does not respond to random electrostatic discharge. Voltage sensing ranges Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model Detector tip style Blade or round, depending on model Light source One high intensity red LED Agency approvals/listings c CSA us, CE, TUV, C-Tick Safety rating 1000 V, CAT IV IP rating IP 40 Operating temperature range -10 C to 50 C Operating humidity ranges 0 % to 95 % (0 C to 30 C) 0 % to 75 % (30 C to 40 C) 0 % to 45 % (40 C to 55 C) Operating altitude 3000 meters Batteries 2 AAA alkaline batteries included N10140 Related standards and regulations for: Safety Europe and ROW: Low voltage directive and related standards as: EN61010 respectively IEC61010 for international requirements EMC Europe and ROW: EMC directive and related standards as: EN61326 respectively IEC61326 and their subset for ESD. Not all EMC standards are necessary due to no contact to mains voltage. Environmental Especially in European markets with relations to WEEE and RoHs directive for the used materials and information in the user documetation (manual) Americas version Ordering Information Fluke-1AC-A1-II ACV Detector 90-1000V, ENGL/LASPN/CFR Part Number 2432932 Fluke-1AC-A2-II ACV Detector 90-1000V, BRPORT/JAP/CHIN-T Part # 2432944 Fluke-1AC-E1-II ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH Part # 2432967 Fluke-1AC-E2-II ACV Detector 200-1000V, DANSH/NORW/SWED Part # 2432971 Fluke-1AC-P1-II ACV Detector 200-1000V, KOR/THAI/SPANISH Part #2433000 Fluke-1LAC-A-II Low Voltage Detector 20-90 VAC AMERICAS PACIFIC Part # 2433021 FLK-1AC-A1-II-5PK Volt Alert, 5 Pack For USA Part # 2433042 FLK-1AC-E1-II-5PK Volt Alert, 5 Pack For EUROPE Part # 2433056 European version Low volt version Fluke. Keeping your world up and running. Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 2 675 200 or Fax (31 40) 2 675 222 In Canada (800) 36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com (c)2005 Fluke Corporation. All rights reserved. Printed in U.S.A. 6/2005 2513868 D-US-N Rev A