1AC-II/1LAC-II VoltAlert
The pocket-sized voltage detector
The next generation VoltAlert™ ac voltage testers from
Fluke are easy to use—just touch the tip to a terminal strip,
outlet, or cord. When the tip glows red and the unit beeps,
you know there’s voltage in the line. Electricians, mainte-
nance, service, safety personnel, and homeowners can
quickly test for energized circuits and defective grounds on
the factory floor, in the shop, or at home.
• The 1AC-II continually tests its battery and its circuit integrity
with a periodic double flash visual indication using Fluke
Voltbeat™ technology.
• The VoltAlert™ Tester (1AC-II and 1LAC-II) is a Category IV —1000 V
overvoltage rated product for added user protection, the highest
rated of its kind.
• Voltage detection of 90 V to 1000 V ac or 200 V to 1000 V ac
depending on model, as well as a 24 V to 1000 V ac control
circuit model.
• It is rugged, reliable, and has a two-year warranty.
Technical Data
N10140
Specifications
Operating principle
Senses the steady state elec-
trostatic field produced by ac
voltage through insulation
without requiring contact to the
bare conductor. A red glow at
the tip and a beeping noise (if
not switched OFF) indicates the
presence of voltage.
Note: Does not respond to random
electrostatic discharge.
Voltage sensing ranges
Nominally, 90 V AC to 1000 V
AC or 200 V AC to 1000 V AC
depending on model, 45 Hz to
405 Hz; also a 20 V to 90 V
control circuit model
Detector tip style
Blade or round, depending
on model
Light source
One high intensity red LED
Agency approvals/listings
c CSA us, CE, TUV, C-Tick
Safety rating
1000 V, CAT IV
IP rating
IP 40
Operating temperature
range
-10 °C to 50 °C
Operating humidity ranges
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Operating altitude
3000 meters
Batteries
2 AAA alkaline batteries
included
Related standards
and regulations for:
Safety
Europe and ROW: Low voltage
directive and related stan-
dards as: EN61010 respectively
IEC61010 for international
requirements
EMC
Europe and ROW: EMC direc-
tive and related standards as:
EN61326 respectively IEC61326
and their subset for ESD. Not
all EMC standards are neces-
sary due to no contact to mains
voltage.
Environmental
Especially in European markets
with relations to WEEE and
RoHs directive for the used ma-
terials and information in the
user documetation (manual)
Ordering Information
Fluke-1AC-A1-II ACV Detector 90-1000V, ENGL/LASPN/CFR
Part Number 2432932
Fluke-1AC-A2-II ACV Detector 90-1000V, BRPORT/JAP/CHIN-T
Part # 2432944
Fluke-1AC-E1-II ACV Detector 200-1000V, ENGL/GER/FREN/DUTCH
Part # 2432967
Fluke-1AC-E2-II ACV Detector 200-1000V, DANSH/NORW/SWED
Part # 2432971
Fluke-1AC-P1-II ACV Detector 200-1000V, KOR/THAI/SPANISH
Part #2433000
Fluke-1LAC-A-II Low Voltage Detector 20-90 VAC AMERICAS PACIFIC
Part # 2433021
FLK-1AC-A1-II-5PK Volt Alert, 5 Pack For USA
Part # 2433042
FLK-1AC-E1-II-5PK Volt Alert, 5 Pack For EUROPE
Part # 2433056
Fluke Corporation
PO Box 9090, Everett, WA USA 98206
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa (31 40) 2 675 200 or
Fax (31 40) 2 675 222
In Canada (800) 36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2005 Fluke Corporation. All rights reserved.
Printed in U.S.A. 6/2005 2513868 D-US-N Rev A
Fluke. Keeping your world
up and running.
Americas version European version Low volt version
