General Purpose Silicon Rectifiers 1N4001-G Thru. 1N4007-G Voltage: 50 to 1000 V Current: 1.0 A RoHS Device DO-41 Features - Low cost construction. - Fast forward voltage drop. - Low reverse leakage. - High forward surge current capability. 1.000(25.40) Min. - High soldering temperature guarantee: 260 OC/10 seconds, 0.375"(9.5mm) lead length at 5lbs(2.3kg) tension. 0.205(5.21) 0.161(4.10) Mechanical data 0.117(2.97) DIA. 0.078(2.00) DIA. - Case: Transfer molded plastic, DO-41 - Epoxy: UL 94V-0 rate flame retardant 1.000(25.40) Min. - Polarity: Indicated by cathode band - Lead: Plated axial lead, solderable per MIL-STD-750, method 2026 0.035(0.90) DIA. 0.027(0.70) DIA. - Mounting position: Any - Weight: 0.012ounce, 0.34 grams(approx.). Dimensions in inches and (millimeter) Electrical Characteristics (at TA=25C unless otherwise noted) Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Symbol 1N4001 -G 1N4002 -G 1N4003 -G 1N 4004 -G 1N4005 -G 1N4006 -G 1N4007 -G Unit Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current 0.375"(9.5mm) Lead Length @TA=55C I(AV) 1.0 A Peak Forward Surge Current, 8.3mS single half sine-wave superimposed on rated load (JEDEC method) IFSM 30 A Maximum Instantaneous Forward Voltage @1.0A VF 1.1 V Parameter Maximum DC Reverse Current at Rated DC Blocking voltage per element TA=25C 5.0 IR A 50 TA=100C CJ 15 pF RJA 60 C/W Operating Temperature Range TJ -55 ~ +150 C Storage Ttemperature Range TSTG -55 ~ +150 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) NOTES: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance from junction to ambient and junction to lead at 0.375"(9.5mm) lead length P.C.B mounted. Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 1 QW-BG013 Comchip Technology CO., LTD. General Purpose Silicon Rectifiers Rating and Characteristic Curves ( 1N4001-G Thru. 1N4007-G) Fig.1 - Typical Forward Current Derating Curve Fig.2 - Maximum. Non-Repetitive Peak Forward Surge Current 35 Peak Forward Surge Current, FSM (A) Average Forward Current, I(AV) (A) 1.2 1.0 0.8 0.6 0.4 Single phase Half wave, 60Hz Resistive or inductive load 0.2 30 25 20 15 10 5 0 0 0 25 50 75 100 125 150 175 1 2 5 10 20 50 100 Ambient Temperature, TA (C) Number of Cycles at 60Hz Fig.3 - Typical Instantaneous Forward Characteristics Fig.4 - Typical Reverse Characteristics Instantaneous Reverse Current, IR (mA) 10 Instantaneous Forward Current, IF (A) 8.3mS, single half sine-wave, JEDEC method. TJ=TJmax 1.0 0.1 Pulse width=300s. 1% duty cycle TJ=25C 0.01 10 TJ=100 OC 1.0 0.1 TJ=25 OC 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 Instantaneous Forward Voltage, VF (V) 20 40 60 80 100 120 140 Percent of Peak Reverse Voltage, (%) Fig.5 - Typical Junction Capacitance 100 Capacitance, CJ (pF) f=1MHz O TJ=25 C 10 10 0.1 1 10 100 Reverse Voltage, VR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 2 QW-BG013 Comchip Technology CO., LTD. General Purpose Silicon Rectifiers Taping Specification For Axial Lead Diodes E 90 5 Z A L1 B L2 T E D0 W0 L D1 H D W DO-41 SYMBOL A B Z T E |L1-L2| (mm) 5.00 0.50 52.40 1.50 1.60 (max) 6.00 0.40 3.00 (max) 1.00 (max) 0.197 0.020 2.063 0.059 0.063 (max) 0.236 0.016 0.118 (max) 0.039 (max) (inch) DO-41 SYMBOL D1 D0 D W0 L W H (mm) 85.70 0.30 16.60 0.40 330.00 72.00 3.00 260.00 5.00 75.00 5.00 150.00 5.00 (inch) 3.374 0.012 0.654 0.016 12.992 2.835 0.118 10.236 0.197 2.953 0.197 5.906 0.197 Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 3 QW-BG013 Comchip Technology CO., LTD. General Purpose Silicon Rectifiers Marking Code Part Number Marking Code Packaging 1N4001T-G 1N4002T-G 1N4003T-G 1N4004T-G 1N4005T-G 1N4006T-G 1N4007T-G 1N4001A-G 1N4002A-G 1N4003A-G 1N4004A-G 1N4005A-G 1N4006A-G 1N4007A-G 1N4001B-G 1N4002B-G 1N4003B-G 1N4004B-G 1N4005B-G 1N4006B-G 1N4007B-G 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 REEL REEL REEL REEL REEL REEL REEL AMMO AMMO AMMO AMMO AMMO AMMO AMMO BULK BULK BULK BULK BULK BULK BULK 1N4XXX 1N4XXX = Product type marking code Note: 1) Suffix code after part number to specify packaging item . Packaging REEL PACK AMMO PACK BULK PACK Code T A B Standard Packaging BULK PACK REEL PACK Case Type DO-41 REEL Reel Size ( pcs ) (inch) 5,000 13 Case Type BOX ( pcs ) DO-41 1,000 AMMO PACK Case Type BOX ( pcs ) DO-41 5,000 Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 4 QW-BG013 Comchip Technology CO., LTD.