www.hamlin.com 55075 Geartooth Hall Effect Sensor Features and Benefits Features Benefits Applications * Rotary position geartooth sensor * Stainless steel M12 threaded barrel * Electronic protection against severe and automotive environments * Self adjusting magnetic range * 3 wire (voltage output) * EMC protection (consult Hamlin) * Short circuit/reverse voltage protection * Zero speed detection * Long life; up to 20 billion operations * High speed operation * No chopper delay * Unaffected by harsh environments * Rotary orientation not critical * On-chip 10 bit A/D converter * Customer selection of cable length and connector type * * * * DIMENSIONS (in) mm Geartooth sensor Camshaft sensor Linear encoder Rotary encoder BLOCK DIAGRAM SPECIFICATIONS Hall Type Digital Switch 3 Wire ( Voltage Output) Maximum Vdc -25 to +25.2 Operation Vdc 4.75 to 25.2 Overvoltage Protection Vdc-max 27 Output High Voltage Vdc-min VDD - 2 (sinking outputs with internal pull-up resistor) Output Low Voltage Vdc-max 0.6 @ 20mA Output Current (continuously on) mA-max 20 Supply Voltage (Note 1) Current Consumption Switching Speed mA-min 1 mA-max 10.5 kHz-max Temperature 15 Operating O C -40 to +85 Storage O C -65 to +85 Note 1 - As long as Tj (Junction Temperature) is not exceeded APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination TABLE 1 Cable Length Options:(Cable Type 24 AWG 7/32 PVC 105oC, Double Insulated) SELECT OPTION (.059") 1.5mm Typical SELECT OPTION DESCRIPTION A Tinned leads B Crimped terminals C 6.35mm fastons D AMP MTE 2.54mm pitch E JST XHP 2.5mm pitch CABLE LENGTH (in) Typical Output TABLE 2 Termination Options:- mm 01 (3.94) 100 02 (11.81) 300 03 (19.69) 500 04 (29.53) 750 05 (39.37) 1000 ORDERING INFORMATION 55075 00 XX X Series 55075 Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: Cable Length Table 1 Termination Table 2 +1 920 648 3000 * Fax: +1 920 648 3001 * Email: sales.us@hamlin.com +44 (0)1379 649700 * Fax: +44 (0)1379 649702 * Email: sales.uk@hamlin.com +49 (0) 6142 923920 * Fax: +49 (0) 6142 923921 * Email: sales.de@hamlin.com +33(0) 1 6047 3000 * Fax: +33(0) 1 6015 9136 * Email: sales.fr@hamlin.com Issue No: AF Date: 05.02.09 DCR B6092 INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser's reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN.