Selection Guide
Class 9001 Type K
30 mm Push Buttons
The Class 9001 Type K family of push buttons,
pilot lights and selector switches are heavy-
duty products for heavy-duty applications.
They offer interchangeable color inserts, color
caps, contact blocks and light modules for
customer flexibility and reduced inventory.
In addition, all contact blocks can be mounted side-
by-side and/or in tandem to minimize enclosure
space requirements. Further, the Type K was the rst
automotive manufacturing approved 30 mm operator.
Heavy-duty, oil-tight, dust-tight and water-tight
without boots
• Rated UL Types 4 and 13
• Universal color caps reduce inventory, provide
more exibility
• Fingersafe® contact blocks and light modules for
improved safety
• Color-coded contact blocks for ease of use
and troubleshooting
• Single screw mounting of contact blocks for
quick installation
Operator Type Heavy-duty, Oil-tight, Water-tight,
NEMA 4, 13
Contact Color Non-illuminated
Full Guard
None 9001KR1B
1 N.O. 9001KR1GH5
1 N.C. 9001KR1RH6
1 N.O./1 N.C. (2) 9001KR1(2)H13
1 N.O./1 N.C. U9001KR1UH13**
No Guard
None 9001KR3B
1 N.O. 9001KR3GH5
1 N.C. 9001KR3RH6
1 N.O./1 N.C. (2) 9001KR3(2)H13
1 N.O./1 N.C. U9001KR3UH13**
Extended Guard
None 9001KR2B
1 N.O. 9001KR2GH5
1 N.C. 9001KR2RH6
1 N.O./1 N.C. (2) 9001KR2(2)H13
1 N.O./1 N.C. U9001KR2UH13**
Type K Momentary Contact Push Buttons
(non-illuminated)
(1) Insert light module assembly code. See light modules table for selections.
(2) Insert color codes for Types KR1, 2, 3; B=• L=•, E=•, G=•, S=•, R=•, W= , Y=•
and UNIVERSAL= U**
(3) Insert lens color codes for Types K_L: L=•, G=•, R=•, W= , Y=•, A=• and C=
(4) Insert color codes for Types KR4, 5, 24, 25; B=•, L=•, G=•, S=•, R=• and Y=•
** Universal inserts contain one each of the following color inserts: black, blue, green, orange, red,
white and yellow. No “universal” mushroom heads.
*** Red mushroom head knobs can be imprinted with “EMERGENCY STOP” in raised white letters.
Use color code “R05 instead of R,” snap-in only.
+or ++=Complete
Unit
Legend
Plate
Light
Module
(if necessary)
Operator Contact
Block
Operator Type Heavy-duty, Oil-tight, Water-tight,
NEMA 4, 13
Contact Color Illuminated
Full Guard
1 N.O. 9001K1L(1)A
1 N.C. 9001K1L(1)GH5
1 N.O./1 N.C. 9001K1L(1)RH6
1 N.O./1 N.C. (3) 9001K1L(1)(3)H13
No Guard
1 N.O. 9001K2L(1)A
1 N.C. 9001K2L(1)GH5
1 N.O./1 N.C. 9001K2L(1)RH6
1 N.O./1 N.C. (3) 9001K2L(1)(3)H13
Extended Guard
1 N.O. 9001K3L(1)A20
1 N.C. 9001K3L(1)G20H5
1 N.O./1 N.C. 9001K3L(1)R20H6
1 N.O./1 N.C. (3) 9001K3L(1)(3)20H13
Mushroom Button 1 8 in. Dia. Head
None 9001K2L(1)A20
1 N.O. 9001K2L(1)G20H5
1 N.C. 9001K2L(1)R20H6
1 N.O./1 N.C. (3) 9001K2L(1)(3)20H13
Mushroom Button 2 ¼ in. Dia. Head
None 9001K2L(1)A21
1 N.O. 9001K2L(1)G21H5
1 N.C. 9001K2L(1)R21H6
1 N.O./1 N.C. (3) 9001K2L(1)(3)21H13
Operator Type Heavy Duty, Oil-tight, Water-tight,
NEMA 4, 13
Contact Color Non-illuminated
3 Position Mom.-Push Maint.-Neutral Mom.-Pull
None 9001KR8A
1 N.C./N.C.E.C. 9001KR8RH25**
1 N.C./N.C.E.C. 9001KR8GH25
1 N.C./ N.C.E.C. (2) 9001KR8(2)H25
2 Position Maint.-Push Maint.-Pull
None 9001KR9A
1 N.C. 9001KR9RH6**
1 N.O./1 N.C. 9001KR9GH13
1 N.C./ N.C.E.C. (2) 9001KR9(2)H13
2 Position, Trigger-Action, Turn-to-Release Emergency Stop
None 9001KR16
2 N.O./2 N.C. 9001KR16H2
1 N.O./1 N.C. 9001KR16H13
Operator Type Heavy-duty, Oil-tight, Water-tight,
NEMA 4, 13
Contact Color Illuminated
3 Position Mom.-Push Maint.-Neutral Mom.-Pull
None 9001KR8P(1)A
1 N.C./N.C.E.C. 9001KR8P(1)RH25**
1 N.C./N.C.E.C. 9001KR8P(1)GH25
1 N.C./ N.C.E.C. (2) 9001KR8P(1)(2)H25
2 Position Maint.-Push Maint.-Pull
None 9001KR9P(1)A
1 N.C. 9001KR9P(1)RH6
1 N.O./1 N.C. 9001KR9P(1)GH13
1 N.O./1 N.C. (2) 9001KR9P(1)(2)H13
Type K Momentary Contact Push Buttons
(illuminated)
Type K Multi-Function Push Buttons
(non-illuminated)
Type K Multi-Function Push Buttons
(illuminated)
(1) Insert light module assembly code. See light modules table for selections.
(2) Insert color codes for Types KR1, 2, 3; B=• L=•, E=•, G=•, S=•, R=•, W= , Y=•
and UNIVERSAL= U**
(3) Insert lens color codes for Types K_L: L=•, G=•, R=•, W= , Y=•, A=• and C=
(4) Insert color codes for Types KR4, 5, 24, 25; B=•, L=•, G=•, S=•, R=• and Y=•
** Universal inserts contain one each of the following color inserts: black, blue, green, orange, red,
white and yellow. No “universal” mushroom heads.
*** Red mushroom head knobs can be imprinted with “EMERGENCY STOP” in raised white letters.
Use color code “R05 instead of R,” snap-in only.
(1) Insert light module assembly code. See light modules table for selections.
(2) Color codes for Types KR8 and KR9 illuminated and non-illuminated: B*=•, L=•, G=•, S*=•,
R=•, W= , Y=•, A=• and C=
Pilot Light Type Heavy-duty, Oil-tight, Water-tight, NEMA 4, 13
Color
Standard
9001KP(1)A31
9001KP(1)R31
9001KP(1)G31
(4) 9001KP(1)(4)
Push-to-test
9001KT(1)A31
9001KT(1)R31
9001KT(1)G31
(4) 9001KT(1)(4)
Remote Test
9001KTR(5)A31
9001KTR(5)R31
9001KTR(5)G31
(4) 9001KTR(5)(4)
Operator Type
0 = Open Contact
1 = Contact
Heavy-duty, Oil-tight, Water-tight, NEMA 4, 13
Non-illuminated Illuminated
Description Sequence Color Color
2 Position
Off-On
None 9001KS11B 9001K11J(1)R
0 1 (2) 9001KS11(2)H36 9001K11J(1)GH36
One contact
closed per
position
0
1
1
09001KS11BH13 (2) 9001K11J(1)(2)H13
3 Position
Hand-Off-Auto
None 9001KS43B 9001K43J(1)R
1
0
0
0
0
19001KS43BH13 9001K43J(1)GH13
One contact
closed per
position
1
0
0
0
1
0
0
0
1
9001KS46BH28 (2) 9001K46J(1)(2)H28
(2) 9001KS46(2)H28 9001K46J(1)GH28
Two contacts
closed per
position
1
0
0
1
0
0
0
1
0
0
1
0
0
0
1
0
0
1
9001KS46BH103 — —
9001KS46RH103 9001K46J(1)RH103
9001KS46GH103 9001K46J(1)GH103
1
0
1
1
0
19001KS42BH7 9001K42J(1)GH7
4 Position
One contact
closed per
position
None 9001KS88B 9001K88J(1)R
1
0
0
0
0
1
0
0
0
0
1
0
0
0
0
1
9001KS88BH2 9001K88J(1)GH2
(2) 9001KS88(2)H2 (2) K88J(1)(2)H2
Type K Pilot Lights Type K Maintained Contact Selector Switches
(1) Insert light module assembly code. See light modules table for selections.
(4) Color codes: A31=•,L31=•, C31= , G31=•, R31=•, W31= , Y31=•
(5) For KTR, use only full voltage light modules; AC use only. See Light Modules table.
+++ = Complete
Unit
Legend
Plate
Light
Module
(if necessary)
Operator Contact
Block
(1) Insert light module assembly code. See light modules table for selections.
(2) Color codes for Type KS illuminated and non-illuminated selector switch. B=•, L=•, G=•, S*=•, R=•,
W= , Y=•, A=• and C= . Available in gloved knobs (add F to color code. Example: FB for Black).
Lamps
Voltage Rating Lamp Number (ANSI)
6 V AC/DC 0.9 VA 755 25501-01020
12-14 V AC/DC 1.2 VA 756 25501-01037
24-28 V AC/DC 1.2 VA 757 25501-01002
48 V AC/DC 2.6 VA 48 MB 25501-01025
120 V AC/DC 3.0 VA 120 MB 25501-01027
For LED lamps, see Schneider Electric’s Square D Digest. All transformer light modules use 6 V lamps.
Accessories
Description Type Assembly Code (1)
Transformer
110-120 VAC 9001KM1 1
220-240 VAC 9001KM7 7
380-480 VAC 9001KM5 5
550-600 VAC 9001KM6 6
Full Voltage(5)
12-14 VAC/DC 9001KM32 32
24-28 VAC/DC 9001KM35 35
48 VAC/DC 9001KM36 36
120 VAC/DC 9001KM38 38
Position
Suffix # 1 2 3 4 5 6
H1 9001KA1 —————
H2 9001KA1 9001KA1 ————
H5 9001KA2 —————
H6 9001KA3 —————
H7 9001KA2 9001KA2 ————
H8 9001KA3 9001KA3 ————
H9 9001KA4 9001KA1 ————
H13 — 9001KA1 ————
H14 — 9001KA3 ————
H23 9001KA1 9001KA1 9001KA1 9001KA1 9001KA1 9001KA1
H24 9001KA1 9001KA2 ————
H25 9001KA5 9001KA3 ————
H28 9001KA1 9001KA2 ————
H36 9001KA1 9001KA1 9001KA3 9001KA3 — —
Symbol Type Description
9001KA1 1 N.O./1 N.C.
9001KA4 1 N.O.E.C./1 N.C.
9001KA2 1 N.O.
9001KA6 1 N.O.E.C.
9001KA3 1 N.C.
9001KA5 1 N.C.L.O.
Legend Plates
Fingersafe Light Modules Fingersafe Contact Blocks
“H” Suffix Numbers for Contact Blocks
(1) Substitute assembly code number in catalog number.Fingersafe removable terminal shroud standard
for all light modules.
(5) For remote test pilot lights, use standard depth, full voltage, AC only.
N.O. = Normally open, N.C. = Normally closed
E.C.= Early closing; L.O.= Late opening.
Type 9001KA contact blocks are designed to be mounted
side-by-side or in tandem. “H” numbers designate contact
block arrangement.
Locating Nib
TOP VIEW
Example: Full guard universal push button with KA1 contact block located in right-hand position
(position 2) = 9001KR1UH13.
Legends are standard black with silver or white letters.
Standard Markings Standard Aluminum Standard Aluminum
Blank 9001KN200 9001KN300
Start 9001KN201 9001KN301
Stop* 9001KN202 9001KN302
On 9001KN203 9001KN303
Off 9001KN204 9001KN304
Emerg. Stop* 9001KN205 9001KN305
Forward 9001KN206 9001KN306
Reverse 9001KN207 9001KN307
Close 9001KN208 9001KN308
Open 9001KN209 9001KN309
Down 9001KN210 9001KN310
Up 9001KN211 9001KN311
Run 9001Kn212 9001Kn312
Reset 9001KN213 9001KN313
On-Off 9001KN245 9001KN345
Hand-off-Auto 9001KN260 9001KN360
Pull to Start
Push to Stop 9001KN279 9001KN379
Specify Mrkg. 9001KN299 9001KN399
* “STOP” and “EMERGENCY STOP” legends have RED backgrounds with SILVER letters for aluminum
and BLACK letters for plastic.
Mushroom Button 1 8 in. Dia. Head
None 9001KR4B
1 N.O. 9001KR4GH5
1 N.C. 9001KR4RH6
1 N.O./1 N.C. (4) 9001KR4(4)H13
Mushroom Button 2 ¼ in. Dia. Head
None 9001KR5B
1 N.O. 9001KR5GH5
1 N.C. 9001KR5RH6***
1 N.O./1 N.C. (4) 9001KR5(4)H13
Document Number 9001BR9401R11/09
Schneider Electric USA, Inc.
Automation and Control Center of Excellence
8001 Knightdale Blvd.
Knightdale, NC 27545
Tel: 919-266-3671
www.schneider-electric.us
This document has been
printed on recycled paper
© 2009 Schneider Electric All Rights Reserved
11-09 lh
Selection Guide
XB4 22 mm
Push Buttons
The XB4 chrome push buttons, pilot lights
and selector switches are designed for
industrial applications. They combine ease
of installation and new technology such as
protected LED® light modules and spring
clamp contact blocks or light modules.
The world’s most popular push button is rated both
NEMA and UL Types 1, 2, 3, 4, 4X and 13, and IP65
for the most demanding oil-tight, water-tight, dust-
tight and corrosion-resistant applications. Properly
installed, these devices are UL listed, CSA certied
and meet VDE, IEC and European Community
Standards. Available locally and globally with
consistent part numbering, the XB line is the most
extensive offering of control and signaling devices in
the world!
Flush Head
ZB4BA1 ZB4BA2 ZB4BA3 ZB4BA4 ZB4BA5 ZB4BA6 ZB4BA8
Extended Head
ZB4BL1 ZB4BL2 ZB4BL3 ZB4BL4 ZB4BL5 ZB4BL6 —
Guarded Head
ZB4BA16 ZB4BA26 ZB4BA36 ZB4BA46 ZB4BA56 ZB4BA66 —
Booted Head
ZB4BP1 ZB4BP2 ZB4BP3 ZB4BP4 ZB4BP5 ZB4BP6 —
Push Button Operators
Flush Head Premarked
ZB4BA133 START ZB4BA331 ZB4BA432
—ZB4BA333 ZB4BA435
—ZB4BA341 —
Extended Head Premarked
— —
ZB4BL432
ZB4BL434
ZB4BL435
START OFF
OFF
IO
O
STOP
ON
Available Size(s)
2 Position Momentary
30 mm ZB4BC24 ZB4BC44
40 mm ZB4BC2 ZB4BC4
60 mm ZB4BR2 ZB4BR4
Push Maintain/Pull Release
40 mm ZB4BT2 ZB4BT84*
60 mm ZB4BX2 ZB4BT4, ZB4BX4
Push Maintain/Turn Release
30 mm ZB4BS42 ZB4BS834*, ZB4BS44
40 mm ZB4BS52 ZB4BS844*, ZB4BS54
60 mm ZB4BS62 ZB4BS64
Push Maintain/Key Release
30 mm ZB4BS72 ZB4BS934*, ZB4B74
40 mm ZB4BS12 ZB4BS944*, ZB4B14
60 mm ZB4BS24 ZB4BS964*, ZB4B24
Mushroom Operators
*Trigger-action emergency stop operators.
Position
Standard Black Lever
2 Position
ZB4BD2 ZB4BD4
— —
3 Position
ZB4BD3
ZB4BD5
ZB4BD7
ZB4BD8
Extended Black Lever
2 Position
ZB4BJ2
ZB4BJ4
— —
3 Position
ZB4BJ3
ZB4BJ5
ZB4BJ7
ZB4BJ8
Key Operator
2 Position
ZB4BG2
ZB4BG4
ZB4BG6
—
3 Position
ZB4BG3
ZB4BG5
ZB4BG9
ZB4BG0
ZB4BG7
ZB4BG08
ZB4BG1
ZB4BG8
Selector SwitchesIlluminated and Non-Illuminated Color Key
White Black Green Red Yellow Blue Clear Grey
Light Source Color Supply Voltage Number Supply Voltage Number
Protected LED
24 Vac or Vdc
ZB4BVB1
110-120 Vac
ZB4BVG1
ZB4BVB3 ZB4BVG3
ZB4BVB4 ZB4BVG4
ZB4BVB5 ZB4BVG5
ZB4BVB6 ZB4BVG6
Lens Color Light Source Supply Voltage Number
Direct Supply (lamp not included)
BA 9s Bulbs 2.4 W Max.
(not included) ≤ 250 Vac ZV4BV6
Transformer Type (6 V lamp included)
BA 9s bulb (included)
110-120 Vac 50/60 Hz ZB4BV3
230-240 Vac 50/60 Hz ZB4BV4
440-480 Vac 60 Hz ZB4BV8
Pilot Light Module (with base)
Spring Return
Maintained Position Key Removal
Contact Block Guide
2 Position Selector Switch
O X 1 N.O. (left or right)
X O 1 N.C. (left or right)
O X 1 N.O.
X O 1 N.C.
Contact Block Guide
3 Position Selector Switch
X O O 1 N.O. left
O X O 2 N.C. wired in seried (side by side)
O O X 1 N.O. right
X X O 1 N.C. right
O X X 1 N.C. left
X O X 2 N.O. wired in parallel (side by side)
Flush Head Incandescent
ZB4BW31 ZB4BW33 ZB4BW34 ZB4BW35 ZB4BW36 ZB4BW37
Extended Head LED
ZB4BW313 ZB4BW333 ZB4BW343 ZB4BW353 ZB4BW363 —
Extended Head Incandescent
ZB4BW11 ZB4BW13 ZB4BW14 ZB4BW15 ZB4BW16 ZB4BW17
Extended Head LED
ZB4BW113 ZB4BW133 ZB4BW143 ZB4BW153 ZB4BW163 —
Silicon Booted Flush Head
ZB4BW513 ZB4BW533 ZB4BW543 ZB4BW553 ZB4BW563 —
Illuminated Push Buttons
Screw Terminals
24 Vac or Vdc ZBVB1 ZBVB3 ZBVB4 ZBVB5 ZBVB6
110-120 Vac ZBVG1 ZBVG3 ZBVG4 ZBVG5 ZBVG6
Spring Clamps
24 Vac or Vdc ZBVB15 ZBVB35 ZBVB45 ZBVB55 ZBVB65
110-120 Vac ZBVG15 ZBVG35 ZBVG45 ZBVG55 ZBVG65
Single LED Light Modules (without mounting
base, without contact blocks)
N.O. N.C.
24 Vac or Vdc
ZB4BW0B11 ZB4BWOB31 ZB4BWOB41 ZB4BWOB51 ZB4BWOB61 1 —
ZB4BW0B12 ZB4BWOB32 ZB4BWOB42 ZB4BWOB52 ZB4BWOB52 — 1
ZB4BW0B13 ZB4BWOB33 ZB4BWOB43 ZB4BWOB53 ZB4BWOB63 2 —
ZB4BW0B15 ZB4BWOB35 ZB4BWOB45 ZB4BWOB55 ZB4BWOB65 1 1
110-120 Vac
ZB4BW0G11 ZB4BWOG31 ZB4BWOG41 ZB4BWOG51 ZB4BWOG61 1 —
ZB4BW0G12 ZB4BWOG32 ZB4BWOG42 ZB4BWOG52 ZB4BWOG62 — 1
ZB4BW0G13 ZB4BWOG33 ZB4BWOG43 ZB4BWOG53 ZB4BWOG63 2 —
ZB4BW0G15 ZB4BWOG35 ZB4BWOG45 ZB4BWOG55 ZB4BWOG65 1 1
LED Light Modules (screw terminal)
with Mounting Base and Contact Blocks
Actuation
Distance
Travel
XB4BA821 XB4BA841 XB4BA861 0.24-0.63 in.
(6-16 mm) 0.39 in.
(10 mm)
XB4BA822 XB4BA842 XB4BA862 0.63-1.02 in.
(16-26 mm
XB4BA921 XB4BA941 XB4BA961 1.18-5.12 in,
(30-130 mm) 0.55 in
(14 mm)
XB4BA922 XB4BA942 XB4BA962 5.12-10.12 in.
(130-257 mm)
Reset Operators
Joystick Controllers
1 step 1 N.O.
contact per direction
2 direction
XD4PA12: Spring Returned
XD4PA22: Maintained
4 direction
XD4PA14: Spring Returned
XD4PA24: Maintained
Yellow Contrast Plates
PVC Legend Plates
Markings Number
S
T
O
P
E
M
E
R
G
E
N
C
Y
60 mm Round
Unmarked ZBY9101
“Emergency Stop” ZBY9330
90 mm Round
Unmarked ZBY8101
“Emergency Stop” ZBY8330
30 X 40 mm
OFF ON OFF
HAND AUTO
O (red background) ZBY2931
IZBY2147
STOP ZBY2304
AUTO-HAND ZBY2364
CLOSE ZBY2314
DOWN ZBY2308
EMERGENCY STOP ZBY2330
FAST ZBY2328
FORWARD ZBY2305
HAND ZBY2316
HAND-OFF-AUTO ZBY2387
INCH ZBY2321
OFF ZBY2312
OFF-ON ZBY2367
ON ZBY2311
OPEN ZBY2313
POWER ON ZBY2326
RESET (red background) ZBY2323
REVERSE ZBY2306
RUN ZBY2334
SLOW ZBY2327
START ZBY2303
STOP-START ZBY2366
UP ZBY2307
For potentiometer with shaft
length 1.73 in. to 1.97 in.
(44 mm to 50 mm)
For shaft 0.25 in.
(6.35 mm) diameter
ZB4BD922
Potentiometer Operator
Lamps
Voltage Wattage Number
6 V 1.5 w DL1CB006
12 V 2.6 w DL1CE012
24 V 2.6 w DL1CE024
130 V 2.6 w DL1CE130
Pilot Light Heads
Lens
Color
LED or Neon
ZB4BVO13 ZB4BVO33 ZB4BVO43 ZB4BVO53 ZB4BVO63 —
Incandescent
ZB4BVO1 ZB4BVO3 ZB4BVO4 ZB4BVO5 ZB4BVO6 ZB4BVO7
Incandescent Light Modules (screw terminal)
with Mounting Base and Contact Blocks
Light Source Supply Voltage N.O. N.C. Number
Direct Supply (lamp not included)
BA 9s bulbs
2.4 W max.
bulb
(order lamp
separately)
≤ 250 Vac
1 — ZB4BW061
— 1 ZB4BW062
2 — ZB4BW063
1 1 ZB4BW065
Transformer Type
BA 9s
Incandescent
bulb (included)
110-120 Vac
50/60 Hz
1 — ZB4BW031
1 1 ZB4BW035
230-240 Vac
50/60 Hz
1 — ZB4BW041
1 1 ZB4BW045
Push Button
Selection Guide
Make the most of your energySM
Contact Blocks
N.O. N.C. Screw Terminals Spring Clamps
Contact Blocks with Mounting Base
1 — ZB4BZ101 ZB4BZ1015
— 1 ZB4BZ102 ZB4BZ1025
2 — ZB4BZ103 ZB4BZ1035
— 2 ZB4BZ104 ZB4BZ1045
1 1 ZB4BZ105 ZB4BZ1055
Contact Blocks without Mounting Base
1 — ZBE101 ZBE1015
— 1 ZBE102 ZBE1025
