MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 FEATURES * * * * * * * * * Dual-Supply Operation . . . 5 V to 18 V Low Noise Voltage . . . 4.5 nV/Hz Low Input Offset Voltage . . . 0.15 mV Low Total Harmonic Distortion . . . 0.002% High Slew Rate . . . 7 V/s High-Gain Bandwidth Product . . . 16 MHz High Open-Loop AC Gain . . . 800 at 20 kHz Large Output-Voltage Swing . . . 14.1 V to -14.6 V Excellent Gain and Phase Margins MC33078 . . . D (SOIC), DGK (MSOP), OR P (PDIP) PACKAGE (TOP VIEW) OUT1 IN1- IN1+ VCC - 1 8 2 7 3 6 4 5 VCC+ OUT2 IN2- IN2+ MC33079 . . . D (SOIC) OR P (PDIP) PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ VCC+ 2IN+ 2IN- 2OUT DESCRIPTION/ORDERING INFORMATION The MC33078 and MC33079 are bipolar dual/quad operational amplifiers with high-performance specifications for use in quality audio and data-signal applications. These devices operate over a wide range of single- and dual-supply voltages and offer low noise, high-gain bandwidth, and high slew rate. Additional features include low total harmonic distortion, excellent phase and gain margins, large output voltage swing with no deadband crossover distortion, and symmetrical sink/source performance. 1 14 2 13 3 12 4 11 5 10 6 7 9 8 4OUT 4IN- 4IN+ VCC- 3IN+ 3IN- 3OUT ORDERING INFORMATION PACKAGE (1) TA PDIP - P Dual -40C to 85C SOIC - D VSSOP/MSOP - DGK PDIP - P Quad (1) (2) SOIC - D ORDERABLE PART NUMBER Tube of 50 MC33078P Tube of 75 MC33078D Reel of 2500 MC33078DR Reel of 2500 MC33078DGKR Reel of 250 MC33078DGKT Tube of 50 MC33079P Tube of 75 MC33079D Reel of 2500 MC33079DR TOP-SIDE MARKING (2) MC33078P M33078 MY_ PREVIEW PREVIEW Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. DGK: The actual top-side marking has one additional character that designates the assembly/test site. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2004-2006, Texas Instruments Incorporated MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 SYMBOL (EACH AMPLIFIER) IN+ + IN - - OUT Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC+ Supply voltage (2) 18 V VCC- Supply voltage (2) -18 V VCC+ - VCC- Supply voltage 36 V Input voltage, either input (2) (3) VCC+ or VCC- 10 Input current (4) Duration of output short circuit (5) Unlimited D package JA Package thermal impedance, junction to free air (6) (7) 97 DGK package 172 P package TJ Operating virtual junction temperature Tstg Storage temperature range (1) (2) (3) (4) (5) (6) (7) V mA C/W 85 -65 150 C 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC-. The magnitude of the input voltage must never exceed the magnitude of the supply voltage. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unless some limiting resistance is used. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions VCC- VCC+ TA 2 Supply voltage Operating free-air temperature range Submit Documentation Feedback MIN MAX -5 -18 5 18 -40 85 UNIT V C MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 Electrical Characteristics VCC- = -15 V, VCC+ = 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS VIO Input offset voltage VO = 0, RS = 10 , VCM = 0 VIO Input offset voltage temperature coefficient VO = 0, RS = 10 , VCM = 0 IIB Input bias current VO = 0, VCM = 0 IIO Input offset current VO = 0, VCM = 0 VICR Common-mode input voltage range VIO = 5 mV, VO = 0 AVD Large-signal differential voltage amplification RL 2 k, VO = 10 V Maximum output voltage swing VID = 1 V kSVR (1) 2 3 TA = -40C to 85C 300 RL = 2k 25 14 TA = 25C 90 110 TA = -40C to 85C 85 VOM+ 10.7 VOM- -11.9 VO = 0 nA V dB 13.8 VOM- -13.2 -13.7 VOM+ 13.5 14.1 VOM- -14 -14.6 80 100 dB 80 105 dB 15 29 -20 -37 VCC+ = 5 V to 15 V, VCC- = -5 V to -15 V Supply current (per channel) nA 13.2 Supply-voltage rejection ratio ICC mV VOM+ VIN = 13 V |VID| = 1 V, Output to GND 150 175 13 Common-mode rejection ratio Output short-circuit current 750 800 TA = -40C to 85C UNIT V/C 2 TA = 25C IOS (1) MAX 0.15 TA = -40C to 85C RL = 10k CMMR TYP TA = -40C to 85C TA = 25C RL = 600 VOM MIN TA = 25C Source current Sink current TA = 25C 2.05 TA = -40C to 85C V mA 2.5 2.75 mA Measured with VCC differentially varied at the same time Operating Characteristics VCC- = -15 V, VCC+ = 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS SR Slew rate at unity gain AVD = 1, VIN = -10 V to 10 V, RL = 2 k, CL = 100 pF GBW Gain bandwidth product f = 100 kHz B1 Unity gain frequency Open loop Gm Gain margin RL = 2 k m Phase margin RL = 2 k Amp-to-amp isolation f = 20 Hz to 20 kHz CL = 0 pF MIN TYP 5 7 V/s 10 16 MHz 9 MHz -11 CL = 100 pF -6 CL = 0 pF 55 CL = 100 pF 40 Power bandwidth VO = 27 V(PP), RL = 2 k, THD 1% THD Total harmonic distortion VO = 3 Vrms, AVD = 1, RL = 2 k, f = 20 Hz to 20 kHz zo Open-loop output impedance VO = 0, f = 9 MHz rid Differential input resistance Cid Differential input capacitance Vn In MAX UNIT dB deg -120 dB 120 kHz 0.002 % 37 VCM = 0 175 k VCM = 0 12 pF Equivalent input noise voltage f = 1 kHz, RS = 100 4.5 nV/Hz Equivalent input noise current f = 1 kHz 0.5 pA/Hz Submit Documentation Feedback 3 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 0.1 F 10 100 k 2.0 k 4.3 k + D.U.T. 1/2 MC33078 Scope x1 RIN = 1.0 M - 4.7 F 100 k Voltage Gain = 50,000 2.2 F 24.3 k 110 k 0.1 F NOTE: All capacitors are non-polarized. Figure 1. Voltage Noise Test Circuit (0.1 Hz to 10 Hz) 4 22 F Submit Documentation Feedback MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS INPUT BIAS CURRENT vs COMMON-MODE VOLTAGE 600 600 500 VCC+ = 15 V VCM = 0 V VCC- = -15 V TA = 25C 500 TA = 25C IIB - Input Bias Current - nA IIB - Input Bias Current - nA INPUT BIAS CURRENT vs SUPPLY VOLTAGE 400 300 200 100 0 -15 400 300 200 100 0 -10 -5 0 5 10 5 15 INPUT BIAS CURRENT vs TEMPERATURE 800 2 VCC+ = 15 V VCC- = -15 V 1.5 VCM = 0 V 700 600 500 400 300 200 100 0 -55 -35 -15 5 25 45 65 8 9 10 11 12 13 14 15 16 17 18 INPUT OFFSET VOLTAGE vs TEMPERATURE VIO - Input Offset Voltage - mV IIB - Input Bias Current - nA 900 7 VCC+/-VCC- - Supply Voltage - V VCM - Common Mode Voltage - V 1000 6 85 105 125 VCC+ = 15 V VCC- = -15 V VCM = 0 V 1 0.5 0 -0.5 -1 -1.5 -2 -55 -35 -15 TA - Temperature - C 5 25 45 65 85 105 125 TA - Temperature - C Submit Documentation Feedback 5 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) INPUT COMMON-MODE VOLTAGE LOW PROXIMITY TO VCC- vs TEMPERATURE INPUT COMMON-MODE VOLTAGE HIGH PROXIMITY TO VCC+ vs TEMPERATURE 0 1.2 Input Common-Mode Voltage High Proximity to V CC+ - V Input Common-Mode Voltage Low Proximity to V CC- - V 1.4 1 0.8 0.6 VCC+ = 3 V to 15 V 0.4 VCC- = -3 V to -15 V D e VIO = 5 mV 0.2 VO = 0 V 0 -55 -25 5 35 65 95 VCC- = -3 V to -15 V D VIO = 5 mV -0.4 VO = 0 V -0.6 -0.8 -1 -1.2 -25 5 35 65 95 125 TA - Temperature - C OUTPUT SATURATION VOLTAGE PROXIMITY TO VCC+ vs LOAD RESISTANCE OUTPUT SATURATION VOLTAGE PROXIMITY TO VCC- vs LOAD RESISTANCE 10 0 9 -1 TA = 125C -2 8 TA = 25C -3 Output Saturation Voltage Proximity to V CC- - V Output Saturation Voltage Proximity to V CC+ - V -0.2 -1.4 -55 125 TA - Temperature - C TA = -55C -4 -5 -6 -7 -8 -9 7 6 5 TA = 125C 4 TA = 25C 3 TA = -55C 2 1 -10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 kW RL - Load Resistance - kh 6 VCC+ = 3 V to 15 V Submit Documentation Feedback 0.5 1 1.5 2 2.5 3 3.5 kW RL - Load Resistance - k@ 4 4.5 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) OUTPUT SHORT-CIRCUIT CURRENT vs TEMPERATURE 10 VCC+ = 15 V 60 VCC- = -15 V 9 VID = 1 V 8 50 40 Source Sink 30 20 ICC - Supply Current - mA IOS - Output Short-Circuit Current - mA 70 SUPPLY CURRENT vs TEMPERATURE VCM = 0 V RL = High Impedance VO = 0 V 7 6 VCC = 15 V 5 4 3 VCC = 10 V 1 10 -55 -35 -15 5 25 45 65 85 0 -55 105 125 TA - Temperature - C 100 90 80 70 -35 -15 5 25 45 65 85 105 125 TA - Temperature - C CMRR vs FREQUENCY PSSR vs FREQUENCY 120 VCC+ = 15 V VCC- = -15 V VCM = 0 V DVCM = 1.5 V TA = 25C VCC+ = 15 V VCC- = -15 V TA = 25C 110 100 90 80 60 PSRR - dB CMMR - dB VCC = 5 V 2 50 40 70 50 40 30 T3P 60 T3N 30 20 20 10 10 0 100 10k 100k 1.0E+06 10M 1k 1M 1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+07 0 1.0E+02 1.0E+03 1.0E+04 1.0E+05 1.0E+07 100 10k 100k 1.0E+06 10M 1k 1M f - Frequency - Hz f - Frequency - Hz Submit Documentation Feedback 7 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) GAIN BANDWIDTH PRODUCT vs SUPPLY VOLTAGE GAIN BANDWIDTH PRODUCT vs TEMPERATURE 30 GBW - Gain Bandwidth Product - MHz GBW - Gaind Bandwidth Product - MHz 30 25 20 15 10 5 6 7 8 20 15 10 5 0 -55 0 5 25 9 10 11 12 13 14 15 16 17 18 OUTPUT VOLTAGE vs SUPPLY VOLTAGE 5 25 45 65 30 15 VO - Output Voltage - V RL = 2 kW 5 0 -5 RL = 10 kW -10 RL = 2 kW 6 7 8 125 20 15 10 5 -20 5 105 VCC+ = 15 V VCC- = -15 V RL = 2 k W AV = 1 THD < 1% TA = 25C 25 RL = 10 kW 10 -15 85 OUTPUT VOLTAGE vs FREQUENCY 20 VO - Output Voltage - V -15 TA - Temperature - C VCC+/-VCC- - Supply Voltage - V 9 10 11 12 13 14 15 16 17 18 0 10 100 10k 100k 1.E+06 10M 1k 1M 1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+07 VCC+/-VCC- - Supply Voltage - V 8 -35 Submit Documentation Feedback f - Frequency - Hz MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) OPEN-LOOP GAIN vs SUPPLY VOLTAGE OPEN-LOOP GAIN vs TEMPERATURE 120 110 115 AV - Open-Loop Gain - dB AV - Open-Loop Gain - dB 105 100 95 90 RL = 2 k W f < 10 Hz DVO = 2/3(VCC+ - VCC-) TA = 25C 85 6 7 8 105 100 95 90 85 80 5 110 RL = 2 k W f < 10 Hz DVO = 2/3(VCC+ - VCC-) TA = 25C 80 -55 9 10 11 12 13 14 15 16 17 18 VCC+/-VCC- - Supply Voltage - V VCC- = -15 V VO = 1 Vrms 35 190 180 TA = 25C Crosstalk Rejection - dB ZO - Output Impedance - W 200 40 30 25 20 15 10 AV = 1000 AV = 100 AV = 10 AV = 1 1.0E+04 10k 1.0E+05 100k 1.0E+06 1M 45 65 85 105 125 170 Drive Channel VCC+ = 15 V VCC- = -15 V RL = 2 k W VO = 20 VPP TA = 25C 160 150 140 130 120 110 5 0 1.0E+03 1k 25 CROSSTALK REJECTION vs FREQUENCY VCC+ = 15 V 45 5 TA - Temperature - C OUTPUT IMPEDANCE vs FREQUENCY 50 -35 -15 1.0E+07 10M 100 1.E+01 10 f - Frequency - Hz Submit Documentation Feedback 1.E+02 100 1.E+03 1k 1.E+04 10k 1.E+05 100k f - Frequency - Hz 9 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) TOTAL HARMONIC DISTORTION vs FREQUENCY 0.1 1 VCC+ = 15 V VCC- = -15 V VO = 1 Vrms AV = 1 RL = 2 k W TA = 25C THD - Total Harmonic Distortion - % THD - Total Harmonic Distortion - % 1 TOTAL HARMONIC DISTORTION vs OUTPUT VOLTAGE 0.01 0.001 0.0001 10 1.E+01 AV = 1000 0.1 AV = 100 0.01 AV = 10 0.001 VCC+ = 15 V VCC- = -15 V f = 2 kHz RL = 2 kW TA = 25C AV = 1 0.0001 100 1.E+02 1k 1.E+03 10k 1.E+04 0 100k 1.E+05 1 2 f - Frequency - Hz 10 9 9 8 7 Rising Edge 5 4 DV = 2/3(V - V ) IN CC+ CC- AV = 1 3 RL = 2 kW TA = 25C 2 5 6 7 8 9 10 11 12 13 14 15 16 17 18 SR - Slew Rate - V/s SR - Slew Rate - V/s Falling Edge VCC+/-VCC- - Supply Voltage - V 10 5 6 7 8 9 105 125 SLEW RATE vs TEMPERATURE 10 6 4 VO - Output Voltage - Vrms SLEW RATE vs SUPPLY VOLTAGE 8 3 Falling Edge 7 Rising Edge 6 5 4 3 VCC+ = 15 V VCC- = -15 V DVIN = 20 V AV = 1 RL = 2 kW 2 -55 Submit Documentation Feedback -35 -15 5 25 45 65 TA - Temperature - C 85 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) GAIN AND PHASE vs FREQUENCY 12 70 Gain, TA = 25C Gain - dB 40 Phase Shift - deg Gain 50 -90 30 20 10 0 1.E+03 1k 1.E+04 10k 20 Gain, TA = -55C 40 Phase, TA = 125C 60 70 Phase, TA = -55C 1.E+05 100k 1.E+06 1M 0 -180 1.E+07 10M 1 10 80 1000 100 Cout - Output Load Capacitance - pF OVERSHOOT vs OUTPUT LOAD CAPACITANCE INPUT VOLTAGE AND CURRENT NOISE vs FREQUENCY 100 100 80 VCC+ = 15 V VCC- = -15 V VCC- = -15 V VIN = 100 mVPP TA = 25C 70 60 50 40 TA = 125C 30 10 VCC+ = 15 V nV/OHz Input Voltage Noise - nV/rtHz 90 Overshoot - % 50 Phase, TA = 25C f - Frequency - Hz 20 30 6 3 -135 VCC+ = 15 V VCC- = -15 V RL = 2 k W TA = 25C 10 9 -45 Gain Margin - dB 60 0 VCC+ = 15 V VCC- = -15 V VO = 0 V Gain, TA = 125C Phase Margin - deg 0 Phase TA = 25C 10 1 Input Voltage Noise Input Current Noise pA/OHz Input Current Noise - pA/rtHz 80 GAIN AND PHASE MARGIN vs OUTPUT LOAD CAPACITANCE 10 TA = -55C 0 10 100 1000 1 10 Cout - Output Load Capacitance - pF Submit Documentation Feedback 100 1k 1000 10k 10000 0.1 100k 100000 f - Frequency - Hz 11 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) INPUT REFERRED NOISE VOLTAGE vs SOURCE RESISTANCE GAIN AND PHASE MARGIN vs DIFFERENTIAL SOURCE RESISTANCE 1000 16 64 60 VCC- = -15 V f = 1 Hz TA = 25C 14 56 52 100 10 40 Gain Margin 32 28 6 VCC+ = 15 V 24 VCC- = -15 V 20 AV = 100 16 VO = 0 V 12 TA = 25C 8 4 1.E+02 100 1.E+03 1k 1.E+04 10k 1.E+05 100k 0 1.E+06 1M 1 1 00 RS - Source Resistance - W e 10 55 0 45 -10 35 VCC+ = 15 V VCC- = -15 V AV = 1 RL = 2 k W CL = 100 pF TA = 25C -20 -30 5 -40 -5 -15 6 10 14 18 22 VO - Output Voltage - V VO - Output Voltage - V 45 2 0 1010k 0 0 0 10100k 0000 Input 10 0 35 15 -10 VCC+ = 15 V VCC- = -15 V AV = -1 RL = 2 k W CL = 100 pF TA = 25C 25 Output -20 -30 5 -40 -50 -5 -50 -60 -15 -60 -2 Time - s 12 101k 00 LARGE SIGNAL TRANSIENT RESPONSE (AV = -1) VI - Input Voltage - V Input Output 100 10 0 RSD - Differential Source Resistance - W e LARGE SIGNAL TRANSIENT RESPONSE (AV = 1) 25 10 10 2 6 10 Time - s Submit Documentation Feedback 14 18 22 VI - Input Voltage - V 1 1.E+01 10 -2 36 8 2 15 44 10 4 55 48 Phase Margin Phase Margin - deg 12 Gain Margin - dB nV/OHz Input Referred Noise Voltage - nV/rtHz VCC+ = 15 V MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 TYPICAL CHARACTERISTICS (continued) LOW_FREQUENCY NOISE 0.6 0.2 400 0.5 0.1 300 0.4 0.0 -0.1 VCC+ = 15 V VCC- = -15 V AV = 1 RL = 2 k W CL = 100 pF TA = 25C 0.2 0.1 -0.2 -0.3 -0.4 0 Output -0.1 -0.2 -0.5 0.0 0.5 1.0 1.5 Input Voltage Noise - nV Input 0.3 200 VI - Input Voltage - V VO - Output Voltage - V SMALL SIGNAL TRANSIENT RESPONSE 100 0 -100 -200 T3 VCC+ = 15 V -300 -0.5 -400 -0.6 -500 VCC- = -15 V BW = 0.1 Hz to 10 Hz TA = 25C -5 Time - s -4 -3 -2 -1 0 1 2 3 4 5 Time - s Submit Documentation Feedback 13 MC33078, MC33079 DUAL AND QUAD HIGH-SPEED LOW-NOISE OPERATIONAL AMPLIFIERS www.ti.com SLLS633B - OCTOBER 2004 - REVISED APRIL 2006 APPLICATION INFORMATION Output Characteristics All operating characteristics are specified with 100-pF load capacitance. The MC33078 and MC33079 can drive higher capacitance loads. However, as the load capacitance increases, the resulting response pole occurs at lower frequencies, causing ringing, peaking, or oscillation. The value of the load capacitance at which oscillation occurs varies from lot to lot. If an application appears to be sensitive to oscillation due to load capacitance, adding a small resistance in series with the load should alleviate the problem (see Figure 2). PULSE RESPONSE (RL = 600 , CL = 380 pF) PULSE RESPONSE (RL = 2 k, CL = 560 pF) Maximum capacitance before oscillation = 380 pF PULSE RESPONSE (RL = 10 k, CL = 590 pF) Maximum capacitance before oscillation = 590 pF 0.25 V per Division 0.25 V per Division 0.25 V per Division Maximum capacitance before oscillation = 560 pF 250 ns per Division 250 ns per Division 0.25 V per Division PULSE RESPONSE (RO = 35 , CO = 1000 pF, RL = 2 k) 0.25 V per Division PULSE RESPONSE (RO = 4 , CO = 1000 pF, RL = 2 k) 0.25 V per Division PULSE RESPONSE (RO = 0 , CO = 1000 pF, RL = 2 k) 250 ns per Division 250 ns per Division 250 ns per Division 250 ns per Division 15 V RO VO 5V -5 V -15 V CL Figure 2. Output Characteristics 14 Submit Documentation Feedback RL = 2 k PACKAGE OPTION ADDENDUM www.ti.com 4-Nov-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MC33078D ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKR ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKRG4 ACTIVE MSOP DGK 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKT ACTIVE MSOP DGK 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DGKTG4 ACTIVE MSOP DGK 8 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078DRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MC33078P ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MC33078PE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 MECHANICAL DATA MPDI001A - JANUARY 1995 - REVISED JUNE 1999 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.020 (0,51) MIN 0.015 (0,38) Gage Plane 0.200 (5,08) MAX Seating Plane 0.010 (0,25) NOM 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.430 (10,92) MAX 0.010 (0,25) M 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated