3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: KA-3528ASEC Super Bright Orange Features Description z SINGLE COLOR. The Super Bright Orange device is made with InGaAlP (on z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER GaAs substrate) light emitting diode chip. PROCESS. z AVAILABLE ON TAPE AND REEL. z IDEAL FOR BACKLIGHTING. z PACKAGE : 1500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH5822 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1201002858 Selection Guide Part No. Dice KA-3528ASEC Lens Type Super Bright Orange (InGaAIP) WATER CLEAR Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 21/2 180 350 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 30 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 125 mW DC Forward Current 50 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH5822 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1201002858 Super Bright Orange SPEC NO: DSAH5822 APPROVED: WYNEC KA-3528ASEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1201002858 KA-3528ASEC Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH5822 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: AUG/11/2007 DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1201002858