299 PHL-4TSI
www.vishay.com Vishay BCcomponents
Revision: 27-Sep-2019 1Document Number: 28432
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Electrolytic Capacitors
Power High Ripple Current Long Life 4-Terminal Snap-In
ADDITIONAL RESOURCES
Fig. 1
FEATURES
Polarized aluminum electrolytic capacitors,
non-solid electrolyte
Large types, minimized dimensions, cylindrical
aluminum case, insulated with a blue sleeve
Pressure relief on the side of the aluminum case
Very long useful life: 5000 h at 105 °C
Temperature range up to 105 °C
Stable mounting and keyed polarity
High ripple current capability
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Switched mode power supplies
Renewable energy power converters
Energy storage in pulse systems
MARKING
The capacitors are marked (where possible) with the
following information:
Rated capacitance (in μF)
Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (M for ± 20 %)
Rated voltage (in V)
Date code
Name of manufacturer
Code for factory of origin
“-” sign to identify the negative terminal, visible from the
top and side of the capacitor
(Partial) ordering code
Climatic category in accordance with IEC 60068
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size (D x L in mm) 35 x 50 to 45 x 100
Rated capacitance range CR470 μF to 2200 μF
Tolerance on CR ± 20 %
Rated voltage range, UR400 V to 450 V
Category temperature range -40 °C to +105 °C
Endurance test at 105 °C 2000 h
Useful life at 105 °C 5000 h
Shelf life at 0 V, 105 °C 1000 h
Based on sectional specification IEC 60384-4 / EN 130300
Climatic category IEC 60068 40 / 105 / 56
3
3
3
D
D
D
3
D
3D Models
299
PHL-4TSI
105 °C
096
PLL-4TSI
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
400 450
470 - 35 x 50
40 x 40
560 35 x 50 35 x 60
40 x 50
680 40 x 40 35 x 70
820 35 x 60 35 x 80
40 x 50 40 x 60
1000 35 x 70
35 x 100
40 x 80
45 x 60
1200
35 x 80
45 x 7040 x 70
45 x 60
1500 35 x 100 40 x 100
45 x 70 45 x 80
1800 40 x 100 45 x 100
45 x 80
2200 45 x 100 -
299 PHL-4TSI
www.vishay.com Vishay BCcomponents
Revision: 27-Sep-2019 2Document Number: 28432
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters AND AVAILABLE FORMS
4-TERMINAL SNAP-IN
Fig. 2 - 4-Terminal snap-in Fig. 3 - Mounting hole diagram
Dummy terminals (A and C) must be free from the electrical circuit.
Table 1
Note
Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ORDERING EXAMPLE
Electrolytic capacitor 299 series
2200 μF / 400 V
4-terminal snap-in:
Ordering code: MAL2 299 56222 E3
Former 12NC: 2222 299 56222
22.5
Ø D
Bottom view
Lmax. 6.3 ± 1
60° 60°
dummy dummy
C
B
A
2 ± 0.1
(4 x)
22.5 ± 0.1
60°
60°
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
Ø DMAX. Lmax. MASS
(g)
PACKAGING QUANTITIES
(units per box)
CARDBOARD BOX
DIMENSIONS
L x W x H
35 x 50 36 52 72 50 390 x 198 x 60
35 x 60 36 62 91 50 390 x 198 x 70
35 x 70 36 72 103 50 377 x 375 x 97
35 x 80 36 82 115 50 377 x 375 x 107
35 x 100 36 102 151 50 377 x 375 x 127
40 x 40 41 42 70 50 440 x 223 x 60
40 x 50 41 52 94 50 440 x 223 x 70
40 x 60 41 62 118 25 230 x 230 x 80
40 x 70 41 72 134 25 230 x 230 x 90
40 x 80 41 82 150 25 230 x 230 x 100
40 x 100 41 102 176 25 230 x 230 x 120
45 x 60 46 62 150 36 377 x 375 x 87
45 x 70 46 72 170 36 377 x 375 x 97
45 x 80 46 82 190 36 377 x 375 x 107
45 x 100 46 102 250 36 377 x 375 x 127
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz
IRRated RMS ripple current at 100 Hz and 105 °C
IL5 Max. leakage current after 5 min at UR
ESR Max. equivalent series resistance at 100 Hz
Z Max. impedance at 10 kHz
299 PHL-4TSI
www.vishay.com Vishay BCcomponents
Revision: 27-Sep-2019 3Document Number: 28432
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
105 °C
(A)
IL5
5 min
(mA)
TYP. ESR
100 Hz
(m)
MAX. ESR
100 Hz
(m)
TYP. Z
10 kHz
(m)
MAX. Z
10 kHz
(m)
CATALOG
NUMBER
MAL2299.......
400
560 35 x 50 2.70 0.452 170 220 130 160 56561E3
680 40 x 40 2.79 0.548 150 190 110 140 56681E3
820 35 x 60 3.44 0.660 120 150 90 110 56821E3
820 40 x 50 3.51 0.660 120 160 90 110 66821E3
1000 35 x 70 3.88 0.804 100 130 70 90 56102E3
1200 35 x 80 4.34 0.964 90 110 60 80 56122E3
1200 40 x 70 4.50 0.964 90 110 60 80 66122E3
1200 45 x 60 4.61 0.964 90 110 60 80 76122E3
1500 35 x 100 5.54 1.204 70 90 50 60 56152E3
1500 45 x 70 5.20 1.204 70 90 60 70 66152E3
1800 40 x 100 6.02 1.444 50 70 40 50 56182E3
1800 45 x 80 5.74 1.444 60 80 50 60 66182E3
2200 45 x 100 6.77 1.764 50 60 40 50 56222E3
450
470 35 x 50 2.54 0.427 190 240 130 160 57471E3
470 40 x 40 2.45 0.427 190 240 140 170 67471E3
560 35 x 60 2.96 0.508 160 200 100 130 57561E3
560 40 x 50 3.05 0.508 160 200 110 140 67561E3
680 35 x 70 3.34 0.616 120 160 90 110 57681E3
820 35 x 80 3.76 0.742 110 140 70 90 57821E3
820 40 x 60 3.73 0.742 110 140 80 100 67821E3
1000 35 x 100 4.74 0.904 90 110 60 80 57102E3
1000 40 x 80 4.41 0.904 90 110 60 80 67102E3
1000 45 x 60 4.34 0.904 90 120 60 80 77102E3
1200 45 x 70 4.84 1.084 80 100 60 70 57122E3
1500 40 x 100 5.67 1.354 60 80 40 50 57152E3
1500 45 x 80 5.39 1.354 60 80 50 60 67152E3
1800 45 x 100 6.36 1.624 50 70 40 50 57182E3
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage 400 V versions Us = 1.1 x UR
Reverse voltage Urev 1 V
Current
Leakage current After 1 min at URIL1 0.006 CR x UR + 4 μA
After 5 min at URIL5 0.002 CR x UR + 4 μA
Inductance
Equivalent series inductance (ESL) All case sizes Ca. 20 nH
299 PHL-4TSI
www.vishay.com Vishay BCcomponents
Revision: 27-Sep-2019 4Document Number: 28432
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Table 3
Note
Multiplier of useful life code: CCC206-5
Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 4
ENDURANCE TEST DURATION AND USEFUL LIFE
ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h)
2000 5000
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
50 100 200 400 1000 10 000
IR MULTIPLIER
0.9 1.0 1.2 1.3 1.4 1.5
IA = Actual ripple current at 100 Hz
IR = Actual ripple current at 100 Hz and 105 °C
(1) Useful life at 105 °C and IR applied: 5000 h
Lifetime multiplier
40
0.0
0.5
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
IA
IR
3.8
CCC206-5
50
200
100
70
50
30
20
10
6.0
4.0
3.0
2.0
1.5
1.0
60 70 80 90 100 110
(1)
Tamb (°C)
299 PHL-4TSI
www.vishay.com Vishay BCcomponents
Revision: 27-Sep-2019 5Document Number: 28432
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 5
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance
IEC 60384-4 /
EN130300
subclause 4.13
Tamb = 105 °C; UR applied
2000 h
C/C: ± 10 %
ESR 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 4.13
Tamb = 105 °C; UR and IR applied;
5000 h
C/C: ± 30 %
ESR 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage: 3 %
Shelf life
IEC 60384-4 /
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min
24 h to 48 h before measurement
C/C: ± 10 %
ESR 1.2 x spec. limit
IL5 2 x spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED