https://www.phoenixcontact.com/us/products/2856799
10/21/2014Page1/5
Surge protection plug-PT 2X1-VF-120AC-ST-2856799
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Protective connector with protective circuit free of leakage current for two floating signals. Connection in series,
consisting of varistor and gas-filled surge arrester between signal wires and ground.
Product Features
Plugs can be checked with CHECKMASTER
Maximum ease of maintenance thanks to the two-piece design
Base element remains an integral part of the installation
Protective devices for use in telecommunications and signaling networks according to IEC 61643-21
Consistent plug-in signal circuit protection
Impedance-neutral disconnection of plug for test and maintenance purposes
Key commercial data
Packing unit 1 pc
Weight per Piece (excluding packing) 29.0 GRM
Custom tariff number 85363010
Country of origin Germany
Technical data
Dimensions
Height 45 mm
Width 17.7 mm
Depth 52 mm
Horizontal pitch 1 Div.
Complete module height 90 mm
Complete module width 17.7 mm
Complete module depth 65.5 mm
https://www.phoenixcontact.com/us/products/2856799
10/21/2014Page2/5
Surge protection plug-PT 2X1-VF-120AC-ST-2856799
Technical data
Ambient conditions
Ambient temperature (operation) -40 °C ... 80 °C
Degree of protection IP20
General
Housing material PA 6.6
Inflammability class according to UL 94 V0
Color black
Standards for air and creepage distances IEC 60664-1
DIN VDE 0110-1
Surge voltage category III
Pollution degree 2
Mounting type On base element
Type DIN rail module, two-section, divisible
Number of positions 2
Direction of action Line-Line & Line-Earth Ground
Arrester can be tested with CHECKMASTER from software version: SW Version 2.13 or later
Protective circuit
IEC test classification C1
C2
C3
Nominal voltage UN120 V AC
Maximum continuous operating voltage UC175 V AC
Nominal current IN6 A (PT BE/FM)
Operating effective current IC at UC≤ 2 µA
Residual current IPE ≤ 4 µA
Nominal discharge current In (8/20) µs 3 kA
Max. discharge current Imax (8/20) µs 8 kA
Nominal pulse current Ian (10/1000) µs (Core-Earth) 40 A
Impulse discharge current (10/350)˽µs, peak value limp 300 A
Output voltage limitation at 1 kV/µs (Core-Earth) static ≤ 800 V
Residual voltage at In, (conductor-ground) ≤ 600 V
Residual voltage with Ian (10/1000)µs (conductor-ground) ≤ 360 V
Energy absorption 85 J
Voltage protection level Up≤ 1 kV (C2 - 2 kA)
Voltage protection level UP (Core-Earth) ≤ 900 V (C1 - 500 A)
≤ 950 V (C2 - 1 kA)
≤ 1 kV (C3 - 25 A)
https://www.phoenixcontact.com/us/products/2856799
10/21/2014Page3/5
Surge protection plug-PT 2X1-VF-120AC-ST-2856799
Technical data
Protective circuit
≤ 1.1 kV (Iimp-300 A)
Response time tA≤ 100 ns
Capacity typ. 3 pF
Resistance in series 0 Ω
Max. required back-up fuse 6 A (PT BE/FM)
Surge current resistance (conductor-ground) C1 - 1 kV/500 A
C2 (4 kV / 2 kA)
C3 (25 A)
Connection data
Connection method Screw connection (in connection with the base element)
Connection type IN PLUGTRAB plug-in system
Connection type OUT PLUGTRAB plug-in system
Standards and Regulations
Standards/regulations EN 61643-21
IEC 61643-21
Classifications
eCl@ss
eCl@ss 4.0 27140201
eCl@ss 4.1 27130801
eCl@ss 5.0 27130801
eCl@ss 5.1 27130801
eCl@ss 6.0 27130807
eCl@ss 7.0 27130807
eCl@ss 8.0 27130807
ETIM
ETIM 2.0 EC000943
ETIM 3.0 EC000943
ETIM 4.0 EC000943
ETIM 5.0 EC000943
UNSPSC
UNSPSC 6.01 30212010
UNSPSC 7.0901 39121610
UNSPSC 11 39121610
https://www.phoenixcontact.com/us/products/2856799
10/21/2014Page4/5
Surge protection plug-PT 2X1-VF-120AC-ST-2856799
Classifications
UNSPSC
UNSPSC 12.01 39121610
UNSPSC 13.2 39121620
Approvals
Approvals
Approvals
GOST
Ex Approvals
Approvals submitted
Approval details
GOST
Drawings
Dimensioned drawing
44,8
90
51,5
65,5
The figure shows the complete module consisting of a base element and connector
