SN54/74LS283 4-BIT BINARY FULL ADDER WITH FAST CARRY The SN54 / 74LS283 is a high-speed 4-Bit Binary Full Adder with internal carry lookahead. It accepts two 4-bit binary words (A1 - A4, B 1 - B4) and a Carry Input (C0). It generates the binary Sum outputs (1 - 4) and the Carry Output (C4) from the most significant bit. The LS283 operates with either active HIGH or active LOW operands (positive or negative logic). 4-BIT BINARY FULL ADDER WITH FAST CARRY LOW POWER SCHOTTKY CONNECTION DIAGRAM DIP (TOP VIEW) VCC 16 B3 15 A3 14 3 13 A4 12 B4 11 4 10 C4 9 J SUFFIX CERAMIC CASE 620-09 16 NOTE: The Flatpak version has the same pinouts (Connection Diagram) as the Dual In-Line Package. 1 2 2 B2 3 A2 4 1 5 A1 PIN NAMES A1 - A4 B1-B4 C0 1 - 4 C4 Operand A Inputs Operand B Inputs Carry Input Sum Outputs (Note b) Carry Output (Note b) 6 B1 7 C0 1 N SUFFIX PLASTIC CASE 648-08 16 8 GND 1 16 LOADING (Note a) HIGH LOW 1.0 U.L. 1.0 U.L. 0.5 U.L. 10 U.L. 10 U.L. 0.5 U.L. 0.5 U.L. 0.25 U.L. 5 (2.5) U.L. 5 (2.5) U.L. D SUFFIX SOIC CASE 751B-03 1 ORDERING INFORMATION SN54LSXXXJ SN74LSXXXN SN74LSXXXD NOTES: a) 1 TTL Unit Load (U.L.) = 40 A HIGH/1.6 mA LOW. b) The Output LOW drive factor is 2.5 U.L. for Military (54) and 5 U.L. for Commercial (74) Temperature Ranges. Ceramic Plastic SOIC LOGIC SYMBOL 5 3 14 12 6 2 15 11 A1 A2 A3 A4 B1 B2 B3 B4 7 C0 C4 1 2 3 4 4 1 13 10 VCC = PIN 16 GND = PIN 8 FAST AND LS TTL DATA 5-1 9 SN54/74LS283 LOGIC DIAGRAM C0 A1 7 B1 5 A2 6 B2 A3 C1 4 1 VCC = PIN 16 GND = PIN 8 = PIN NUMBERS B3 A4 15 14 2 3 C2 2 11 C3 10 13 1 B4 12 3 9 4 FUNCTIONAL DESCRIPTION The LS283 adds two 4-bit binary words (A plus B) plus the incoming carry. The binary sum appears on the sum outputs (1 - 4) and outgoing carry (C4) outputs. C4 Due to the symmetry of the binary add function the LS283 can be used with either all inputs and outputs active HIGH (positive logic) or with all inputs and outputs active LOW (negative logic). Note that with active HIGH inputs, Carry Input can not be left open, but must be held LOW when no carry in is intended. C0 + (A1 + B1) + 2(A2 + B2) + 4(A3 + B3) + 8(A4 + B4) = 1 + 2 2 + 4 3 + 8 4 + 16C4 Where: (+) = plus Example: C0 A1 A2 A3 A4 B1 B2 B3 B4 1 2 3 4 C4 logic levels L L H L H H L L H H H L L H Active HIGH 0 0 1 0 1 1 0 0 1 1 1 0 0 1 (10+9=19) Active LOW 1 1 0 1 0 0 1 1 0 0 0 1 1 0 (carry+5+6=12) Interchanging inputs of equal weight does not affect the operation, thus C0, A1, B1, can be arbitrarily assigned to pins 7, 5 or 3. FAST AND LS TTL DATA 5-2 SN54/74LS283 FUNCTIONAL TRUTH TABLE C (n - 1) An Bn n Cn L L L L H H H H L L H H L L H H L H L H L H L H L H H L H L L H L L L H L H H H C1 - C3 are generated internally C0 is an external input C4 is an output generated internally GUARANTEED OPERATING RANGES Symbol Parameter Min Typ Max Unit VCC Supply Voltage 54 74 4.5 4.75 5.0 5.0 5.5 5.25 V TA Operating Ambient Temperature Range 54 74 - 55 0 25 25 125 70 C IOH Output Current -- High 54, 74 - 0.4 mA IOL Output Current -- Low 54 74 4.0 8.0 mA DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified) Limits Symbol Min Parameter VIH Input HIGH Voltage VIL Input LOW Voltage VIK Input Clamp Diode Voltage VOH Output HIGH Voltage VOL Output LOW Voltage IIH Max Unit 2.0 54 0.7 74 0.8 - 0.65 - 1.5 Test Conditions V Guaranteed Input HIGH Voltage for All Inputs V Guaranteed Input LOW Voltage for All Inputs V VCC = MIN, IIN = - 18 mA 54 2.5 3.5 V 74 2.7 3.5 V VCC = MIN, IOH = MAX, VIN = VIH or VIL per Truth Table 54, 74 0.25 0.4 V IOL = 4.0 mA 74 0.35 0.5 V IOL = 8.0 mA C0 20 A Any A or B 40 A C0 0.1 mA Any A or B 0.2 mA C0 - 0.4 mA Any A or B - 0.8 mA - 100 mA VCC = MAX Power Supply Current Total, Output HIGH 34 mA VCC = MAX Total, Output LOW 39 Input HIGH Current IIL Input LOW Current IOS Short Circuit Current (Note 1) ICC Typ - 20 Note 1: Not more than one output should be shorted at a time, nor for more than 1 second. FAST AND LS TTL DATA 5-3 VCC = VCC MIN, VIN = VIL or VIH per Truth Table VCC = MAX, VIN = 2.7 V VCC = MAX, VIN = 7.0 V VCC = MAX, VIN = 0.4 V SN54/74LS283 AC CHARACTERISTICS (TA = 25C, VCC = 5.0 V) Limits Typ Max Unit tPLH tPHL Symbol Propagation Delay, C0 Input to Any Output Parameter 16 15 24 24 ns tPLH tPHL Propagation Delay, Any A or B Input to Outputs 15 15 24 24 ns tPLH tPHL Propagation Delay, C0 Input to C4 Output 11 11 17 22 ns tPLH tPHL Propagation Delay, Any A or B Input to C4 Output 11 12 17 17 ns Min Test Conditions CL = 15 pF Figures 1 & 2 AC WAVEFORMS VIN 1.3 V VIN tPHL VOUT tPLH 1.3 V tPLH 1.3 V 1.3 V VOUT Figure 1 Figure 2 FAST AND LS TTL DATA 5-4 tPHL