RF, MICROWAVE
AND DATALINK CONTACTS
APRIL 2016
for MIL-DTL-38999, Series 23 SuperNine®, Series 80 Mighty Mouse,
and Series 79 Micro-Crimp® connectors
SERIES 85
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts
High Speed
High Reliability
High Availability
No more long lead times —
Glenair high-performance RF,
microwave and datalink contacts are
in stock and ready to ship
50 and 75 ohm coax contacts
Spring-loaded microwave contacts
Twinax contacts
Quadrax contacts
El Ochito® octaxial contacts
CUSTOM PACKAGING—OUR SPECIALTY
Quadrax contacts
installed in a
HiPer-D connector
Custom right angle
board mount
twinax connector
El Ochito® 10GBase-T
Ethernet contacts
installed in a
custom Micro-Crimp
connector
Glenair’s growing portfolio of high-speed solutions now
includes a wide selection of RF, microwave and datalink
contacts. Compatible with MIL-DTL- connectors, these
contacts also t Glenair Series Mighty Mouse , Series
Micro-Crimp® and Series SuperNine® connectors. Designed
in accordance with SAE AS requirements, these contacts
are suitable for aerospace and defense equipment subjected to
high-vibration and temperature extremes.
Glenair’s complete high-speed solution also includes a wide
variety of standard and modied connectors, cordsets, ber
optic and opto-electronic technologies. Our rapid-response
engineering and manufacturing capabilities allow us to quickly
design and build customized interconnects and systems.
Table of Contents
Product Selection Guide ........................................................................................2
AS39029 Coaxial Contacts
Size #8 AS39029 Coaxial Contacts 852-006, 852-007, M39029/59, M39029/60 .....................................6
Size #12 AS39029 Coaxial Contacts 852-001, -002, -003, -004, -005 M39029/27, /28, /102, /103 .......7
Size #16 AS39029 Coaxial Contacts 852-008, 852-009, 852-010, M39029/76, /77, /78 .........................8
Low-Loss Matched-Impedance Contacts
Selection Guide ...................................................................................................................................................... 9
Size #8 50 Ohm Matched-Impedance Contacts 852-030, 852-031, 852-042, 852-043 ....................10
Size #12 50 Ohm Matched-Impedance Contacts 852-015, -016, -017, -018, -019, -037 ..................12
Size #8 75 Ohm Matched-Impedance Contacts 852-056, 852-057, 852-082, 852-083 ....................14
Size #12 75 Ohm Matched-Impedance Contacts 852-103, 852-104, 852-106 .................................. 16
High Performance 75 Ohm Coaxial Cable 960-130, 960-131, 960-132 ................................................18
Spring-Loaded Microwave Coaxial Contacts
Size #8 BMB Style Spring-Loaded 18 GHz Contacts 852-070, 852-071 .............................................. 22
Size #12 SMPM Style Spring-Loaded 40 GHz Contacts 852-024, 852-025, 852-032 ....................... 24
Twinax Contacts
Size #8 AS39029 Concentric Twinax Contacts 853-003, -004, M39029/113, /114 ............................. 26
Size #8 100 Ohm Concentric Twinax Contacts 853-011, 853-012 ........................................................ 28
Size #12 Concentric Twinax Contacts 853-008, 853-009 ......................................................................... 30
Size #8 100 Ohm Dierential Twinax Contacts 853-013, 853-014, 853-024, 853-025 ...................... 32
Size #12 100 Ohm Dierential Ultra-Twinax Contacts 853-015, 853-016 ......................................... 35
Quadrax Contacts
Size #8 100 Ohm and 150 Ohm Quadrax Contacts 854-001, 854-002, 854-014, 854-015 ..............37
Aerospace-Grade Star Quad Cable ............................................................................................................. 39
El Ochito® Octaxial Contacts for Gigabit and 10G Ethernet
Size #8 El Ochito® Contacts 858-003, 858-004, 858-009, 858-010, 858-016, 858-017 ......................... 40
Aerospace-Grade Category 6a Ethernet Cable 963-003, 963-033 ....................................................... 46
Pre-Wired El Ochito® Contacts 858-022 ....................................................................................................... 47
El Ochito® Test Adapters and Jumpers 858-020, 859-117, -118, -132, -133 .........................................49
Part Number Index .............................................................................................51
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • HIgh-Speed Contacts Rev. ..
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Product Selection Guide
AS39029 RF Contacts
Size #8 AS39029 Coaxial Contacts for RG-180 ............6
dc – 700 MHz
Size #8 coaxial contacts accept RG-180 cable. Maximum frequency is 700 MHz.
Crimp termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I,
III, and IV, Series 23 SuperNine, and Series 80 Mighty Mouse connectors with size 8
cavities. AS39029 qualied.
Size #12 AS39029 Coaxial Contacts ...........................7
dc – 3 GHz
Size #12 coaxial contacts accept RG-174, RG-179, RG-180 and RG-316 cable. Crimp
termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I, II, III,
and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse
connectors with size 12 cavities. AS39029 qualied.
Size #16 AS39029 Coaxial Contacts ...........................8
dc – 500 MHz
Size #16 coaxial contacts accept RG-174, RG-178, RG-179 and RG-316 cable. Crimp
termination. Snap-in, rear release. Compatible with MIL-DTL-38999 Series I, II, III,
and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse
connectors with size 16 cavities. AS39029 qualied.
50 Ohm Low-Loss Matched-Impedance Coaxial Contacts
Size #8 50 Ohm Matched-Impedance Contacts...........10
dc – 6 GHz
High-frequency matched-impedance #8 contacts accept RG-316 single and double
shielded cable along with M17/220-0001 cable. Compatible with MIL-DTL-38999,
Series 23 SuperNine and Series 80 Mighty Mouse connectors. Crimp termination.
Snap-in, rear-release. 50 ohm impedance.
Size #12 50 Ohm Matched-Impedance Contacts ...........12
dc – 3 GHz
High-frequency matched-impedance contacts accept RG-178, RG-316, and RG-405
ex cable. Compatible with MIL-DTL-38999 Series I, II, III and IV, Series 23 SuperNine,
Series 79 MicroCrimp and Series 80 Mighty Mouse connectors. Crimp termination.
Snap-in, rear-release. 50 ohm impedance.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Product Selection Guide
50 Ohm Spring-Loaded Microwave Coaxial Contacts
Size #8 Spring-Loaded BMB Coaxial Contacts ............22
dc – 18 GHz
These size 8 contacts conform to the MIL-STD-348 BMB interface standard. These
contacts accept RG-402-FLEX and RG-405-FLEX cables along with other low loss exible
cables. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine and Series
80 Mighty Mouse connectors. Solder termination.
Size 12 Spring-Loaded SMPM Coaxial Contacts ......... 24
dc – 40 GHz
These size 12 contacts accept RG-405-FLEX cable and are compatible with MIL-
DTL-38999, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse
connectors. Solder termination. .
75 Ohm Low-Loss Matched-Impedance Coaxial Contacts
Size #8 75 Ohm Matched-Impedance Contacts ..........14
dc – 4 GHz
High-frequency 75 ohm #8 contacts accept RG-179 cable along with high
performance RS170, SMPTE 292M, SMPTE 424M and other video cables. Compatible
with MIL-DTL-38999 Series I, III, and IV, Series 23 SuperNine and Series 80 Mighty
Mouse connectors. Crimp termination. Snap-in, rear-release.
Size #12 75 Ohm Matched-Impedance Contacts ........16
dc – 3 GHz
75 ohm size #12 matched-impedance contacts accept high performance RS170,
SMPTE 292M and other video cables. Compatible with MIL-DTL-38999 Series I, II,
III, and IV, Series 23 SuperNine, Series 79 MicroCrimp and Series 80 Mighty Mouse
connectors. Crimp termination. Snap-in, rear-release.
75 Ohm High-Performance Video Cable ....................18
Cable is specially designed and manufactured for reliable performance in aircraft
systems and other harsh environments involving high temperature, EMI and
corrosive materials.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Product Selection Guide
Twinax Contacts
Size #8 77 Ohm Concentric Twinax Contacts .............26
M39029 concentric twinax contacts accommodate 77 ohm shielded twisted pair
cable. These size 8 contacts meet the requirements of M39029/113 and /114.
Compatible with MIL-DTL-38999, Series 23 SuperNine and Series 80 Mighty Mouse
connectors. Use with M17/176-00002 databus cable, 10 MHz maximum operating
frequency.
Size #8 100 Ohm Concentric Twinax Contacts ........... 28
These concentric twinax contacts accommodate 24 AWG 100 ohm shielded twisted
pair data cable. Compatible with MIL-DTL-38999 Series I, III, and IV, Series 23
SuperNine and Series 80 Mighty Mouse connectors. Accepts TE/Raychem 0024A0024
and Gore GSC-03-81416-00 cables.
Size #12 77 Ohm Concentric Twinax Contacts ...........30
M39029 concentric twinax contacts accommodate 77 ohm shielded twisted
pair data cable. Typically used for MIL-STD-1553 databus applications, these size
12 contacts meet the requirements of JN1104, DSCC 02003 and DSCC 02004.
Compatible with MIL-DTL-38999 Series I, III, and IV connectors. Snap-in, rear release,
crimp termination.
Size #8 Differential Twinax Contacts ...........................32
Rated for dc – 3 GHz frequency, these contacts accept 68, 75, 77 and 100 ohm shielded
twisted pair cable including with M17/176-00002 databus cable. Compatible with
Series 80 Mighty Mouse connectors and Glenair 233-217 MIL-DTL-38999-type Series III
connectors with keyed #8 cavities. Not for use in standard MIL-DTL-38999 connectors
with unkeyed inserts.
Size #12 Differential Ultra-Twinax Contacts ................. 35
These 100 Ohm dierential twinax contacts are suited for multi-gigabit data rate applications
such as CML, LVDS and other advanced digital communications protocols. Use with high-
speed #30 AWG twisted pair cable. These contacts are compatible with Glenair Series 80
Mighty Mouse connectors with size #12 cavities. Size #12 100 ohm contacts feature DC – 10
GHz frequency range. Solder termination.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Product Selection Guide
El Ochito® Octaxial Contacts
El Ochito® Octaxial Contacts ....................................40
El Ochito, “the Little 8”, brings 1000BASE-T and 10GBASE-T capability to a size #8
snap-in contact with eight inner contacts. Data pair isolation technology reduces
crosstalk between pairs. This contact accepts ight-grade Cat6a cable with #26AWG
conductors.
Not for use with standard MIL-DTL-38999 connectors with unkeyed inserts.
Aerospace Cat6a Cable ............................................ 46
Lightweight, shielded ight-grade Ethernet cable is available in two styles: S/UTP
(unshielded pairs) and S/FTP (foil-wrapped pairs). These 26 AWG cables are 200°C
rated and meet ANSI/TIA 568-C.2 Category 6a requirements.
Pre-Wired El Ochito® Contacts .................................. 47
Pre-wired El Ochito® assemblies are 100% tested and ready for use. These assemblies
are available with three termination options: single-ended, El Ochito® contacts on
both ends, or with an RJ45 plug on one end.
El Ochito® Test Adapters and Jumpers .......................49
Prevent damage to expensive cables with El Ochito® test adapters and jumper
cables. These test adapters properly align mating test contacts without the added
expense and time-consuming labor of mating connectors. Jumper cables have
shielded Cat6a RJ45 plugs.
Quadrax Contacts
Quadrax Contacts ...................................................37
100 ohm Ethernet and 150 ohm Fibre Channel dierential quadrax contacts are
compatible with standard Series 80 Mighty Mouse connectors and Glenair 233-217
MIL-DTL-38999-type Series III connectors with keyed #8 inserts. These contacts
accept aerospace grade quad cable.
Not for use with standard MIL-DTL-38999 connectors with unkeyed inserts.
Quad Cable .............................................................39
Aerospace-grade four-conductor 100 ohm quad cable is available in wire sizes 22, 24
and 26. These high-performance cables feature inner and outer shields for excellent
EMI protection. High-temperature uoropolymer insulation provides up to 150°C
or 200°C temperature rating
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
AS39029 Coaxial Contacts
Size #8 AS39029 Coaxial Contacts
These snap-in, rear-release contacts t Glenair Series 80 Mighty Mouse, Series 23 SuperNine®,
and MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities. Crimp termination.
SAE AS39029 qualied. Shipped unassembled with assembly instruction sheet, expander
tool and push-rod tool.
Pin Contact
Pin Contact
Socket Contact
Socket Contact
Size #8 AS39029 Coaxial Contacts
RG
Cable Size
Pin Contact
M38999
Series I, III, IV
Series 80
Socket Contact
M38999
Series I, III, IV
Series 80
Crimp Tools
Removal Tool
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Die Set
RG ---
(M39029/60-367) ---
(M39029/59-366) -
(M22520/2-01) -
(M22520/2-31) -
(M22520/5-01) -
(M22520/5-05) -
(M81969/14-06)
#8 Sealing Boot
Optional sealing boot ts RG180 cable. Slide
boot onto cable before terminating contact.
Fluorosilicone grommet, Ultem follower.
.985
(25.02)
MAX .326
(8.28)
.350
(8.89)
Cable Range (In.) Part Number
.130-.170 859-042-02
Pin Contact 852-007-08-367
Ø .276/.271
(7.01/6.88)
Ø .165 (4.19)
MIN
Ø .106 (2.69)
MIN
.562 (14.27)
MAX
.031
(0.79)
.517
(13.13)
SHIELD
CRIMP
SLEEVE
Ø .316/.311
(8.03/7.90)
Ø .217/.219
(5.51/5.56)
Socket Contact 852-006-08-366
Ø .276/.271
(7.01/6.88)
ø .0355 ± .0010
(0.90 ± 0.025)
.562
(14.27)
MAX .031 (0.79)
.625 (15.88)
SHIELD
CRIMP
SLEEVE
Ø .316/.311
(8.03/7.90)
Ø .165 (4.19)
MIN
Ø .106 (2.69)
MIN
Inner Contact Dimensions
.027 (0.69) MIN
.165/.155 (4.19/3.94)
MIN
.0355
(0.90)
AS39029 Color Stripes
Part
Number AS39029
Part No.
Color Bands
1st 2nd 3rd
852-006-08-366 M39029/59-366
ORANGE BLUE BLUE
852-007-08-367 M39029/60-367
ORANGE BLUE VIOLET
Technical Data
Specications Construction
QOperating temperature: -65°C to +200°C
QDielectric withstanding voltage: 1300 Vac
rms at sea level, 250 Vac at 50,000 feet
QCurrent rating: 1 ampere
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: MIL-DTL-38999
QMax operating frequency: 700 MHz
QInner contact, body, outer sleeve: copper
alloy, gold over nickel underplate per
AS39029 Type D
QInsulator: fluoroplastic
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts • Rev. ..
Dimensions in Inches (millimeters) are subject to change without notice.
Pin Contact 852-002, 852-004
.031 (0.79)
.570 (14.5) MAX
.300/.295
(7.62/7.49)
.182/.179
(4.62/4.55)
.095/.093
(2.41/2.36)
Socket Contact 852-001
.031 (0.79)
.560 (14.2) MAX
.289/.279
(7.34/7.09)
.182/.179
(4.62/4.55)
.161 (4.09)
MAX
Ø .020
(0.11)
Cable Entry
852-001, -002, -003
RG174, RG179, RG316 .090 (2.29) MIN
RG180 .108 (2.74) MIN
852-004, -005
RG316 .066 (1.68) MIN
Inner Contact Crimp Barrel
.022 (0.56) MIN
.084 (2.13) MIN
Socket Contact 852-003, 852-005
.031 (0.79)
.896 (22.76) MAX
.626/.620
(15.90/15.75)
.182/.179
(4.62/4.55) .161 (4.09)
MAX
Ø .020 (0.11)
Size #12 AS39029 Coaxial Contacts
RG
Cable Size Freq. Pin Contact
M38999 I-IV
Ser. 79, 80
Socket Contact Crimp Tools Insertion/
Removal
Tool
M38999
Series I, III, IV M38999 Ser. II
Series 79, 80
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Die Set
RG174 12 700 MHZ 852-002-12-211
(M39029/28-211)
852-003-12-416
(M39029/75-416)
852-001-12-210
(M39029/27-210)
809-015
(M22520/2-01)
809-135
(M22520/2-34)
809-133
(M22520/31-01)
809-134
(M22520/31-02)
809-132
(M81969/14-04)
RG179 12 200 MHZ 852-002-12-211
(M39029/28-211)
852-003-12-416
(M39029/75-416)
852-001-12-210
(M39029/27-210)
809-015
(M22520/2-01)
809-135
(M22520/2-34)
809-133
(M22520/31-01)
809-134
(M22520/31-02)
809-132
(M81969/14-04)
RG180 12 700 MHz 852-002-12-409
(M39029/28-409)
852-003-12-417
(M39029/75-417)
852-001-12-402
(M39029/27-402)
809-015
(M22520/2-01)
809-135
(M22520/2-34)
809-133
(M22520/31-01)
809-134
(M22520/31-02)
809-132
(M81969/14-04)
RG316 12
700 MHz 852-002-12-211
(M39029/28-211)
852-003-12-416
(M39029/75-416)
852-001-12-210
(M39029/27-210)
809-015
(M22520/2-01)
809-135
(M22520/2-34)
809-133
(M22520/31-01)
809-134
(M22520/31-02)
809-132
(M81969/14-04)
3 GHz 852-004-12-558
(M39029/102-558)
852-005-12-559
(M39029/103-559)(N/A) 809-128
(MH992)
859-006
(K1721)
809-129
(M22520/5-01)
809-130
(M22520/5-03)
809-132
(M81969/14-04)
These snap-in, rear-release contacts t Glenair Series 80 Mighty Mouse, Series 23 SuperNine®,
Series 79 Micro-Crimp® and MIL-DTL-38999 connectors with size #12 cavities. Crimp
termination. SAE AS39029 qualied.
AS39029 Color Stripes
AS39029
Part No.
Color Bands
1st 2nd 3rd
M39029/27-210
RED BROWN BLACK
M39029/27-402
YELLOW BLACK RED
M39029/28-211
RED BROWN BROWN
M39029/28-409
YELLOW BLACK WHITE
M39029/75-416
YELLOW BROWN BLUE
M39029/75-417
YELLOW BROWN VIOLET
M39029/102-558
GREEN GREEN GRAY
M39029/103-559
GREEN GREEN WHITE
AS39029 Coaxial Contacts
Size #12 AS39029 Coaxial Contacts
Technical Data
Specications Construction
QOperating temperature: -65°C. to +200°C.
QDielectric withstanding voltage: 1000 Vac
rms at sea level, 250 Vac at 50,000 feet
QCurrent rating: 1 ampere
QDurability: 500 mating cycles
Q50 ohm nominal impedance*
QVSWR: 1.32 max., 500 MHz to 3 GHz*
QInsertion loss: 0.20 dB max. @ 3 GHz*
* Applies to 852-004 and 852-005 only
QInner contact, body, outer sleeve: copper
alloy, gold over nickel underplate per
AS39029 Type D
QSocket contact hood: stainless steel
QInsulator: fluoroplastic
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #16 AS39029 Coaxial Contacts
RG
Cable Size Max.
Freq.
Pin Contact
M38999 I-IV
Ser. 79, 80
Socket Contact Crimp Tools Insertion/
Removal
Tool
M38999
Series I, III, IV
M38999
Ser. II
Series 79, 80
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Die Set
RG174
RG179
RG316 16 500 MHZ ---
(M39029/76-424)---
(M39029/77-428)---
(M39029/78-432)
-
(M22520/2-01)-
(M22520/2-35)-
(M22520/4-01)-
(M22520/4-02)-
(M81969/14-03)
RG178 16 500 MHZ ---
(M39029/76-425)---
(M39029/77-429)---
(M39029/78-433)
AS39029 Color Stripes
AS
Part No.
Color Bands
st nd rd
M39029/76-424
YELLOW RED YELLOW
M39029/76-425
YELLOW RED GREEN
M39029/77-428
YELLOW RED GRAY
M39029/77-429
YELLOW RED WHITE
M39029/78-432
YELLOW ORANGE RED
M39029/78-433
YELLOW ORANGE ORANGE
AS39029 Coaxial Contacts
Size #16 AS39029 Coaxial Contacts
Technical Data
Specications Construction
QOperating temperature: -65°C. to +200°C.
QDielectric withstanding voltage: 800 Vac
rms at sea level, 250 Vac at 50,000 feet
QCurrent rating: 1 ampere
QDurability: 500 mating cycles
QVSWR: 1.50 max. @ 500 MHz
QInner contact, body, outer sleeve: copper
alloy, gold over nickel underplate per
AS39029 Type D
QSocket contact hood: stainless steel
QInsulator: fluoroplastic
Pin Contact 852-008
.031 (0.79)
.570 (14.5)
MAX .300/.295
(7.62/7.49)
.130/.127
(3.30/3.23) .0635/.0615
(1.61/1.56)
Socket Contact 852-010
.130/.127
(3.30/3.23)
.031 (0.79)
.560 (14.2)
MAX .289/.279
(7.34/7.09)
.113
(2.87) MAX
Socket Contact 852-009
.130/.127
(3.30/3.23)
.113
(2.87) MAX
.896 (22.76)
MAX .626/.620
(15.90/15.75)
.031 (0.79)
Cable Entry
RG174, RG179, RG316
.067 (1.70) MIN
RG178
.0575 (1.46) MIN
Inner Contact Crimp Barrel
.021 (0.53)
MIN
.087 (2.21) MIN
.0155/.0145
(0.39/0.37)
These snap-in, rear-release contacts t Glenair Series 80 Mighty Mouse, Series 23 SuperNine®,
Series 79 Micro-Crimp® and MIL-DTL-38999 connectors with size #16 cavities. Crimp
termination. SAE AS39029 qualied.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
These 50 ohm high frequency contacts provide low insertion loss and improved VSWR
compared to AS39029 coaxial contacts. These snap-in, rear-release contacts are compatible
with MIL-DTL-38999 connectors and Glenair Series 79 Micro-Crimp®, Series 80 Mighty Mouse
and Series 23 SuperNine® connectors.
These 75 ohm high frequency contacts for up to 4 GHz fre quency range accept aerospace
grade digital video cable. These snap-in, rear-release contacts are compatible with MIL-
DTL-38999 connectors, Glenair Series 79 Micro-Crimp®, Series 80 Mighty Mouse and Series
23 SuperNine® connectors.
50 Ohm Matched-Impedance Coaxial Contacts
Cable Size Max.
Freq.
Pin Contact
M38999 I-IV
Ser. 79, 80
Socket Contact
Page
M38999
Series I, III, IV
Series 80
M38999
Series II
Series 79, 80
RG178 12 3 GHz -- -- -- 12
RG316 8 3 GHz --F --F (N/A) 10
RG316 12 3 GHz -- -- -- 12
RG316DS 8 6 GHZ --F --F (N/A) 10
RG316DS 12 3 GHz -- -- -- 12
RG405-FLEX 12 3 GHZ - - - 12
M17/220-0001 8 2.5 GHz -F -F (N/A) 10
75 Ohm Matched-Impedance Coaxial Contacts
Cable Size Max.
Freq.
Pin Contact
M38999 I-IV
Ser. 79, 80
Socket Contact
Page
M38999
Series I, III, IV
Series 80
M38999
Series II
Series 79, 80
RG179 8 4 GHz --F --F (N/A) 14
RG179 12 3 GHz -- -- -- 16
PIC V73263,
V75268, V76261 8 4 GHz --F --F (N/A) 14
PIC V73263,
V75268, V76261 12 4 GHz -- -- -- 16
PIC V78209 8 4 GHz --F --F (N/A) 14
LMR-240-75 8 4 GHz --F --F (N/A) 14
Low-Loss Matched-Impedance Coaxial Contacts
Selection Guide
50 Ohm Matched-Impedance Contacts
75 Ohm Matched-Impedance Contacts
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 50 Ohm Matched-Impedance Coaxial Contacts
RG Cable Size Max.
Freq. Pin
Contact Socket
Contact "A" Hex
In. mm.
RG316
(M17/113-RG316) 8 3 GHz --F --F .128 3.25
RG316DS
(M17/152-00001) 8 6 GHZ --F --F .128 3.25
LLSB-200
(M17/220-0001) 8 2.5 GHz -F -F .213 5.41
Coax contacts t Glenair Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I,
III and IV connectors with size 8 contact cavities. 50 ohm nominal impedance. DC – 6 GHz
frequency range. Inner contact is solder type, shield termination is crimp type. Supplied as
unassembled kit with contact body, center contact, front and rear dielectric, retainer, clamp
nut, crimp sleeve, sealing boot and instruction sheet. Contacts are snap-in, rear-release.
QDC – 6 GHz frequency range
Q50 ohm nominal impedance
Q50 microinches gold over nickel
plating
QCrimp termination
QVSWR 1.25:1 max. @ 6 GHz
QAS39029 design, construction and
performance
Low-Loss Matched-Impedance Coaxial Contacts
Size #8 50 Ohm Matched-Impedance Coaxial Contacts
Pin Contact 852-031, 852-043
CABLE
(REF)
CRIMP
SLEEVE CLAMP
NUT FRONT
DIELECTRIC BODY
RETAINER REAR
DIELECTRIC
CENTER
CONTACT
.562 (14.27)
MAX .517 (13.13)
± .003 (0.08) Ø.219 (5.56)
.217 (5.51)
Ø.316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
“A” HEX
CRIMP
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -65°C. to +200°C.
QVSWR: 1.25:1 max. @ 6 GHz
Q50 ohm nominal impedance
QDielectric withstanding voltage: 1300 Vac
rms at sea level, 250 Vac at 50,000 feet
QCurrent rating: 1 ampere
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28 condition VI, letter J
QCenter contact, body, retainer, clamp nut:
copper alloy, 50 microinches gold over
nickel plating
QFront and rear dielectric: fluoroplastic
QSealing Boot: fluorosilicone rubber, glass-
filled PEI
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 80 Mighty Mouse
Pin Contact
Socket Contact
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Socket Contact 852-030, 852-042
.562 (14.27)
MAX .625 (15.88)
± .006 (0.15)
Ø .316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
Ø .0355 ± .001
(0.90 ± 0.03)
“A” HEX
CRIMP
CRIMP
SLEEVE CLAMP
NUT FRONT
DIELECTRIC BODY
RETAINER REAR
DIELECTRIC
CENTER
CONTACT
CABLE
(REF)
Crimp Tools
Tool terminates cable shield to contact ferrule.
Use with M22520/5 die sets.
-
(M22520/5-01)
Hex Dies
Hex die for crimping ferrule to cable braid.
Hardened steel, black oxide nish.
-
(M22520/5-03)
-
(M22520/5-05)
Removal Tool
-
(M81969/14-12)
Crimp Tools, Removal Tool, Assembly Instruction Sheet
Contact
Part
Number
Crimp Tools Removal
Tool
Assembly
Instruction
Sheet
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Hex Die
852-030 (Solder
termination) (Solder
termination) -
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-12)AI85011
852-031 (Solder
termination) (Solder
termination) -
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-12)AI85012
852-042 (Solder
termination) (Solder
termination) -
(M22520/5-01)-
(M22520/5-05)-
(M81969/14-12)AI85040
852-043 (Solder
termination) (Solder
termination) -
(M22520/5-01)-
(M22520/5-05)-
(M81969/14-12)AI85040
Reference Coax Cable Data
LLSB-200 RG316 RG316DS
Manufacturer Times Microwave (mil spec) (mil spec)
Military Part Number M17/220-0001 M17-113-RG316 M17/152-00001
Impedance 50 ± 2 50 ± 2 50 ± 2
Operating Frequency (Max) . GHz GHz . GHz
Temperature Range -30° to +85°C -55° to +200°C -55° to +200°C
Continuous Working Voltage V rms, max. V rms, max. V rms, max.
Jacket Material LSZH*
FEP FEP
Jacket Diameter .195 (4.95) .098 (2.49) .114 (2.90)
*Low Smoke Zero Halogen cross-linked polyolen
Sealing Boot
Sealing boots are supplied with contacts. To order contacts less the sealing boot, remove the "F" sux
from the part number.
Wire Dia.
(in.) Wire Dia.
(mm.) Part Number
. – . . – . --
. – . . – . --
. – . . – . --
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
Low-Loss Matched-Impedance Coaxial Contacts
Size #8 50 Ohm Matched-Impedance Coaxial Contacts
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size 12 50 Ohm Matched-Impedance Coaxial Contacts
RG Cable Max.
Freq. Pin Contact
Socket Contact
M38999 Series I,
III, IV M38999 Series II
Series 79, 80
RG178
(M17/93-RG178) 3 GHz -- -- --
RG316
(M17/113-RG316) 3 GHz -- -- --
RG316DS
(M17/152-00001) 3 GHz -- -- --
RG405-FLEX 3 GHZ - - -
Coax contacts t Glenair Series 79 Micro-Crimp, Series 80 Mighty Mouse, and MIL-DTL-38999
Series I, II, III and IV connectors with size 12 contact cavities. 50 ohm nominal impedance.
DC – 3 GHz frequency range. Contacts are snap-in, rear-release. Gold plated copper alloy,
uoroplastic insulator.
QDC – 3 GHz frequency range
Q50 ohm nominal impedance
Q50 microinches gold over nickel
plating
QCrimp termination
QAS39029 performance
QAccepts RG-405-Flex low-loss
microwave cable
Socket Contact
(MIL-DTL-38999 Series
II, Glenair Series 79 and
Series 80)
Socket Contact
(MIL-DTL-38999
Series I, III, and IV)
Pin Contact
Low-Loss Matched-Impedance Coaxial Contacts
Size #12 50 Ohm Matched-Impedance Coaxial Contacts
Socket Contact 852-015
.560 (14.22) MAX
.289/.279
(7.34/7.09)
.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) CRIMP
FERRULE
.033/.029
(0.83/0.74)
.151/.148
(3.84/3.76)
Socket Contact 852-017
SOLDER
HOLE
.560 (14.22) MAX
.289/.279
(7.34/7.09)
.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) .033/.029
(0.83/0.74)
.151/.148
(3.84/3.76)
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -65C. to +200C.
QVSWR: 1.32:1 max. @ 3 GHz
QNominal impedance: 50 ohms
QInsertion loss: 0.20 dB maximum at 3 GHz
QDielectric withstanding voltage: 1000 Vac
rms at sea level
QCurrent rating: 1 ampere
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28 condition VI, letter J
QCenter contact, body, crimp sleeve: copper
alloy, 50 microinches gold over nickel plating
QInsulator: fluoroplastic
QMIL-DTL-38999 Series I, II, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 79 Micro-Crimp®
QGlenair Series 80 Mighty Mouse
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pin Contact 852-016
.570 (14.48) MAX
.300/.295
(7.62/7.49) .151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
Ø.095/.093
(2.41/2.36)
.182/.179
(4.62/4.55)
SKT T O MATE
WITH
.0205/.0195
(0.521/0.495) PIN
CRIMP
FERRULE
Pin Contact 852-018
.570 (14.48) MAX
.300/.295
(7.62/7.49) .151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
Ø.095/.093
(2.41/2.36) .182/.179
(4.62/4.55)
SKT T O MATE
WITH .0205/.0195
(0.521/0.495) PIN
SOLDER
HOLE
Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet
Contact
Part
Number
Crimp Tools Installation/
Removal
Tool
Assembly
Instruction
Sheet
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Hex Die
852-015 -
(MH992)-
(K1721)-
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-04)AI85001
852-016 -
(MH992)-
(K1721)-
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-04)AI85001
852-017 (Solder
termination) (Solder
termination) (Solder
termination) (Solder
termination) -
(M81969/14-04)AI85002
852-018 (Solder
termination) (Solder
termination) (Solder
termination) (Solder
termination) -
(M81969/14-04)AI85002
852-019 -
(M22520/2-01)-
(K1457)-
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-04)AI85047
852-037 (Solder
termination) (Solder
termination) (Solder
termination) (Solder
termination) -
(M81969/14-04)AI85081
Inner Contact Crimp Tools
-
(MH992)
-
(K1721)
-
(M22520/2-01)
-
(K1457)
Shield Crimp Tool
-
(M22520/5-01)
-
(M22520/5-03)
Installation/Removal Tool
-
(M81969/14-04)
Low-Loss Matched-Impedance Coaxial Contacts
Size #12 50 Ohm Matched-Impedance Coaxial Contacts
Socket Contact 852-019
.896 (22.76) MAX
.626/.620
(15.90/15.75) Ø.151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
Ø.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) CRIMP
FERRULE
Socket Contact 852-037
.896 (22.76) MAX
.626/.620
(15.90/15.75) Ø.151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
Ø.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) SOLDER
HOLE
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size 8 75 Ohm Matched-Impedance Coaxial Contacts
Cable Pin Contact Socket Contact A Hex Crimp
In. mm.
V75268, V76261, V73263
(PIC™ Wire and Cable) --F --F .218 5.54
RG179
(M17/94-RG179) --F --F .128 3.25
V78209
(PIC™ Wire and Cable) --F --F .231 5.87
LMR-240-75
(Times Microwave) --F --F .231 5.87
Size 8 coax contacts t aerospace-grade digital video cable. 75 ohm nominal impedance. 0-4
GHz frequency range. Crimp termination. Supplied as unassembled kit with contact body,
center contact, outer ferrule and sealing boot. These snap-in, rear-release contacts t Glenair
Series 80 Mighty Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with
size 8 contact cavities. Gold-plated copper alloy, uoroplastic insulators.
Pin Contact
Socket Contact
Low-Loss Matched-Impedance Coaxial Contacts
Size #8 75 Ohm Matched-Impedance Coaxial Contacts
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -65C. to +200C.
QDielectric withstanding voltage: 500 Vac
rms at sea level
QCurrent rating: 1 ampere
QVSWR: 1.25:1 max. @ 4 GHz
Q75 ohm nominal impedance
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28 condition VI, letter J
QCenter contact, body, retainer, clamp
nut, ferrule: copper alloy, 50 microinches
gold over nickel plating
QFront and rear insulator: fluoropolymer
QSealing boot: fluorosilicone rubber, glass-
filled PEI
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 80 Mighty Mouse
Socket Contact 852-057
CRIMP
FERRULE
CABLE
(REF)
FRONT
INSULATOR BODY
REAR
INSULATOR
CENTER
CONTACT
.562 (14.27)
MAX .625 (15.88)
± .006 (0.15)
Ø.316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
Ø .0240 ± .0005
(0.61 ± 0.01)
A
HEX CRIMP
Pin Contact 852-056
CRIMP
FERRULE
CABLE
(REF)
FRONT
INSULATOR BODY
REAR
INSULATOR
CENTER
CONTACT
.562 (14.27)
MAX .517 (13.13)
± .003 (0.08)
.219 (5.56)
.217 (5.51) Ø.316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
A
HEX CRIMP
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Sealing Boot
Sealing boots are supplied with contacts. To order contacts less
the sealing boot, remove the "F" sux from the part number.
Crimp Tools, Removal Tool, Assembly Instruction Sheet
Contact Part
Number
Crimp Tools Removal
Tool
Assembly
Instruction
Sheet
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Hex Die
852-056-01F -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-45)-
(M81969/14-12)AI85028
852-056-02F -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-12)AI85059
852-057-01F -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-45)-
(M81969/14-12)AI85028
852-057-02F -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-03)-
(M81969/14-12)AI85059
852-082 -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-45)-
(M81969/14-12)AI85060
852-083 -
(M22520/2-01) -
(M22520/2-37)-
(M22520/5-01)-
(M22520/5-45)-
(M81969/14-12)AI85036
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
Inner Contact Crimp Tools
-
(M22520/2-01)
-
(M22520/2-37)
Shield Crimp Tool
-
(M22520/5-01)
Hex Die
-
(M22520/5-03)
-
(M22520/5-45)
Removal Tool
-
(M81969/14-12)
Low-Loss Matched-Impedance Coaxial Contacts
Size #8 75 Ohm Matched-Impedance Coaxial Contacts
Pin Contact 852-082
CABLE
(REF)
CRIMP
FERRULE
RETAINER FRONT
INSULATOR BODY
REAR
INSULATOR
CENTER
CONTACT
.219 (5.56)
.217 (5.51) Ø.316 (8.03)
.313 (7.95)
.033 (0.84)
.029 (0.74)
.276 (7.01)
.271 (6.88)
.231 (5.87)
HEX CRIMP
.517 (13.13)
± .003 (0.08)
.562 (14.27)
MAX
Socket Contact 852-083
CABLE
(REF)
CRIMP
FERRULE
RETAINER FRONT
INSULATOR BODY
REAR
INSULATOR
CENTER
CONTACT
.625 (15.88)
± .006 (0.15)
.033 (0.84)
.029 (0.74)
Ø .0240 ± .0005
(0.61 ± 0.01)
.276 (7.01)
.271 (6.88)
.231 (5.87)
HEX CRIMP
.562 (14.27)
MAX
Ø.316 (8.03)
.313 (7.95)
MATES WITH .219/.217
(5.56/5.51) PIN
Wire Dia.
(in.) Wire Dia.
(mm.) Part Number
.090 – .130 2.3 – 3.3 --
.130 – .170 3.3 – 4.3 --
.170 – .205 4.3 – 5.2 --
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts • Rev. ..
Dimensions in Inches (millimeters) are subject to change without notice.
75 ohm coax contacts provide DC – 3 GHz frequency range. Crimp termination. Supplied
as unassembled kit with contact body, center contact and outer ferrule. These snap-in,
rear-release contacts t Glenair Series 80 Mighty Mouse, Series 79 Micro-Crimp® and MIL-
DTL-38999 connectors with size 12 contact cavities. Gold-plated copper alloy, uoroplastic
insulator.
Size 12 75 Ohm Matched-Impedance Coaxial Contacts
RG Cable Pin Contact
Socket Contact
M38999 Series
I, III, IV M38999 Series II
Series 79, 80
RG179
(M17/94-RG179) 852-103-02 852-106-02 852-104-02
V75268, V76261, V73263
(PIC™ Wire and Cable) 852-103-01 852-106-01 852-104-01
Low-Loss Matched-Impedance Coaxial Contacts
Size #12 75 Ohm Matched-Impedance Coaxial Contacts
Technical Data
Specifications Construction Connector Compatibility
Operating temperature: -65°C. to +200°C.
Dielectric withstanding voltage: 500 Vac
Current rating: 1 ampere
VSWR: 1.25:1 max. @ 3 GHz
75 ohm nominal impedance
Durability: 500 mating cycles
Shock: EIA-364-27 condition D
Vibration: EIA-364-28 condition VI, letter J
Center contact, body,crimp sleeve:
copper alloy, 50 microinches gold over
nickel plating
Insulator: fluoroplastic
Hood: stainless steel, passivated
MIL-DTL-38999 Series I, II, III and IV
Glenair Series 23 SuperNine®
Glenair Series 80 Mighty Mouse
Glenair Series 79 Micro-Crimp®
Pin Contact 852-103-01, -02
.570 (14.48) MAX
.300/.295
(7.62/7.49) .151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
Ø.095/.093
(2.41/2.36)
.182/.179
(4.62/4.55)
SKT TO MATE
WITH
.0205/.0195
(0.521/0.495) PIN
CRIMP
FERRULE
Socket Contact 852-106-01, -02
.896 (22.76) MAX
.626/.620
(15.90/15.75)
.033/.029
(0.83/0.74)
Ø.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) CRIMP
FERRULE
.151/.148
(3.84/3.76)
Socket Contact 852-104-01, -02
.560 (14.22)
MAX
.289/.279
(7.34/7.09) .151/.148
(3.84/3.76)
.033/.029
(0.83/0.74)
.161/.158
(4.09/4.01) Ø.182/.179
(4.62/4.55)
Ø .0205/.0195
(0.521/0.495) CRIMP FERRULE
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Low-Loss Matched-Impedance Coaxial Contacts
Size #12 75 Ohm Matched-Impedance Coaxial Contacts
Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet
Contact Part
Number
Crimp Tools Insertion/
Removal
Tool
Assembly
Instruction
Sheet
Inner Contact Shield Crimp Sleeve
Crimper Positioner Crimper Positioner
852-103-01 -
(MH992) -
(K1721) -
(M22520/31-01) -
(GP959) -
(M81969/14-04)AI85075
852-103-02 -
(MH992) -
(K1721) -
(M22520/5-01) -
(M22520/5-03) -
(M81969/14-04)AI85024
852-104-01 -
(MH992) -
(K1721) -
(M22520/31-01) -
(GP959) -
(M81969/14-04)AI85075
852-104-02 -
(MH992) -
(K1721) -
(M22520/5-01) -
(M22520/5-03) -
(M81969/14-04)AI85001
852-106-01 -
(M22520/2-01) -
(M22520/2-31) -
(M22520/31-01) -
(GP959) -
(M81969/14-04)AI85088
852-106-02 -
(M22520/2-01) -
(M22520/2-31) -
(M22520/5-01) -
(M22520/5-03) -
(M81969/14-04)AI85031
Inner Contact Crimp Tools
-
(MH992)
-
(K1721)
-
(M22520/2-01)
-
(M22520/2-31)
Shield Crimp Tool
-
(M22520/31-01)
-
(GP959)
-
(M22520/5-01)
-
(M22520/5-03)
Installation/Removal Tool
-
(M81969/14-04)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Glenair Part No. - - -
Manufacturer Part No. V75268 V76261 V73263 V78209 LMR-240-75
Manufacturer PIC™ PIC™ PIC™ PIC™ Times Microwave
Impedance (ohms)
Shielding Eectiveness (dB) >
Video Application RS RS SMPTE M SMPTE M Various
First Shield TC Braid TC Braid TC Braid TC Braid TC Braid
Second Shield None Aluminized lm, %
coverage
Silver plated helical
copper strip, %
Aluminized lm, %
coverage
Aluminized lm, %
coverage
Temperature Rating -° to +° C -° to +° C -° to +° C -° to +° C -° to +° C
Minimum Bend Radius . in. (mm.) . in. (mm.) . in. (.mm.) . in. (.mm.) . in. (.mm.)
Weight (lbs/ ft.) . . . . .
Capacitance (pF/ft) . . . . .
Velocity of Propagation %
Time Delay nS/ft . . . . .
Max. Attenuation
Freq. dB/ ft Freq. dB/ ft Freq. dB/ ft Freq. dB/ ft Freq. dB/ ft
MHz . MHz . MHz . MHz . MHz .
MHz . MHz . MHz . MHz . MHz .
MHz . MHz . MHz . MHz . MHz .
MHz . MHz . MHz . MHz . . GHz .
. GHz . . GHz . . GHz . . GHz . . GHz .
GHz . GHz . GHz . GHz . . GHz .
Low-Loss Matched-Impedance Coaxial Contacts
High Performance 75 Ohm Coaxial Cable
PIC™ Aerospace-Grade Video Cable
PIC™ video cable is specially designed and manufactured for reliable performance in aircraft
systems and other harsh environments involving high temperature, EMI and corrosive
materials. Improved strength, lower attenuation and better shielding compared with M17/94-
RG179. Silver-plated conductor, foamed FEP dielectric, tinned copper braid, FEP or ETFE jacket.
Syydrol resistant, RoHS compliant, meets FAA FAR Parts 23 and 25, Appendix F ammability,
complies with MIL-DTL-17.
Times Microwave LMR®-240-75 Cable
Times Microwave LMR®-240-75 exible low-
loss coaxial cable is designed for 20 year
outdoor service life. Featuring excellent
flexibility and bendability, LMR-240-75
cable has a UV resistant polyethelyne jacket.
PIC™ V76261
ETFE JACKET
Ø .122 (3.10) TINNED COPPER BRAID
Ø .107 (2.72)
ALUMINIZED PLASTIC
FOIL
FOAMED FEP DIELCTRIC
Ø .086 (2.18)
SILVER-PLATED
CONDUCTOR
Ø .019 (0.48)
PIC™ V75268
FEP JACKET
Ø .122 (3.10) TINNED COPPER BRAID
Ø .102 (2.59)
FOAMED FEP DIELCTRIC
Ø .086 (2.18)
SILVER-PLATED
CONDUCTOR
Ø .019 (0.48)
LMR®-240-75
SOLID BARE COPPER
.032 (0.82) DIA.
POLYETHELYNE
JACKET
.240 (6.10) DIA.
TINNED COPPER BRAID
.178 (4.52) DIA. FOAMED
POLYETHELYNE
.150 (3.81) DIA.
ALUMINUM
TAPE
.155 (3.94) DIA.
PIC™ V73263
ETFE JACKET
Ø .125 (3.18) TINNED COPPER BRAID
Ø .107 (2.72)
SILVER PLATED
HELICAL COPPER STRIP
FOAMED FEP DIELCTRIC
Ø .086 (2.18)
SILVER-PLATED
CONDUCTOR
Ø .019 (0.48)
PIC™ V78209
TTEFZEL JACKET
Ø .211 (5.36)
TINNED COPPER BRAID
FOAMED FEP
ALUMINIZED
WRAPPER
SILVER-PLATED
STRANDED
COPPER
CONDUCTOR
#20 AWG
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Spring-Loaded Microwave Frequency Coaxial Contacts
Product Overview and Selection Guide
Size 8 BMB Spring-Loaded Microwave Contacts ......................................... Page 22
Size 12 SMPM Spring-Loaded Microwave Contacts ....................................Page 24
Spring-loaded coaxial contacts maintain consistent mating geometry for optimum preformance at extremely high frequencies in challenging
environmental conditions. These interfaces are adapted from the eld-proven and widely-deployed blind-mate contact interfaces of MIL-
STD-348. Suitable for satellite communications and radar equipment, these contacts are made to the highest standards for mission-critical
applications.
Spring-Loaded BMB Contact
50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-38999
connectors with size #8 contact cavities. Maximum operating frequency 18 GHz.
Spring-loaded BMB pin contact assures full mating under a variety of tolerance
conditions. Interface conforms to MIL-STD-348 gure 322.
50 ohm high frequency size #12 coaxial contacts fit Glenair Series 80 Mighty
Mouse connectors, Glenair Series 79 Micro-Crimp® connectors and MIL-DTL-38999
connectors. Maximum operating frequency 40 GHz.
Spring-Loaded Coaxial Contacts for up to 40 GHz Performance
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 BMB Contacts for DC – 18 GHz
Size 8 50 Ohm BMB Coaxial Contacts for DC – 18 GHz
Cable Pin Contact
Use in Socket Connector
Socket Contact
Use in Pin Connector
RG-402 Flex -- --
RG-142 -- --
LL142
(Harbour Industries) -- --
LMR-240
(Times Microwave) -- --
RG-405 Flex -- --
50 ohm high frequency BMB coaxial contacts snap into standard MIL-DTL-38999 Series I, III
and IVconnectors with size #8 contact cavities. Also compatible with Glenair Series 80 Mighty
Mouse and Series 23 SuperNine® connectors. Maximum operating frequency 18 GHz. Spring-
loaded BMB pin contact assures full mating under a variety of tolerance conditions. Interface
conforms to MIL-STD-348 gure 322. Aerospace-grade construction. Solder termination.
Pin Contact
(for use in socket connectors)
Socket Contact
(for use in pin connectors)
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -55°C. to +125°C.
QDielectric withstanding voltage: 1000 Vac
rms
QFrequency range: DC – 18 GHz
QVSWR: 1.10:1 DC – 1 GHz. Above 1 GHz
1.20 + .025(freq GHz).
Q50 ohm nominal impedance
QInsertion loss: .05 dB @ 400 MHz, above 1
GHz: 0.06 x √(Freq in GHz)
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28 condition VI, letter J
QCenter contact: beryllium copper alloy, 50
microinches gold over nickel plating
QDielectric: PTFE per ASTM D-1710
QBody: beryllium copper alloy, 50
microinches gold over nickel plating
QPin contact outer sleeve: 303 SST per
ASTM A-582, passivated
QPin contact spring: 302 or 17-7 stainless
steel, passivated
QSealing Boot: fluorosilicone rubber
grommet, glass-filled PEI follower
BMB contacts are compatible with the following
connectors with size #8 contact cavities:
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine
QGlenair Series 80 Mighty Mouse
Note: Pin contact 852-070 is installed in
socket connectors. Socket contact 852-
071 is installed in pin connectors.
Construction Details: Pin Contact 852-070
OUTER
SLEEVE
SPRING
SOLDER
HOLE
CENTER
CONTACT
FRONT
BODY
REAR
BODY
CABLE
(REF)
DIELECTRIC
STOP FRONT
DIELECTRIC
Construction Details: Socket Contact 852-071
SOLDER
HOLE
CENTER
CONTACT
BODY
CABLE
(REF)
DIELECTRIC
STOP
FRONT
DIELECTRIC
Spring-Loaded Microwave Frequency Coaxial Contacts
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 BMB Contacts for DC – 18 GHz
Pin Contact 852-070
.621(15.77) .935(23.75)
MAX
Ø.288/.284
(7.32/7.21)
Ø.276/.271
(7.01/6.88)
Ø.316/.313
(8.03/7.95)
.033/.029
(0.84/0.74)
Socket Contact 852-071
.935(23.75)
MAX
.475(12.07)
Ø.276/.271
(7.01/6.88)
Ø.316/.313
(8.03/7.95)
.033/.029
(0.84/0.74)
Removal Tool
No tool is required for installing contact
into connector.
-
(M81969/14-12)
Spring-Loaded Microwave Frequency Coaxial Contacts
Sealing Boot
Sealing boots are supplied with contacts.
Wire Dia.
(in.) Wire Dia.
(mm.) Part
Number
.090 – .130 2.3 – 3.3 --
.130 – .170 3.3 – 4.3 --
.170 – .205 4.3 – 5.2 --
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts • Rev. ..
Dimensions in Inches (millimeters) are subject to change without notice.
Size #12 SMPM-Type Contacts for DC – 40 GHz
50 ohm high frequency size #12 coaxial contacts t Glenair Series 80 Mighty Mouse connectors,
Glenair Series 79 Micro-Crimp®, Glenair Series 23 SuperNine® and MIL-DTL-38999 connectors.
Maximum operating frequency 40 GHz. Spring-loaded male contact assures consistent
mating dimensions and superior microwave performance. Supplied fully assembled with
cable termination instruction sheet.
Male Contact
(for use in socket connectors)
Female Contact
(for use in pin connectors)
Technical Data
Specications
QOperating temperature: -55°C. to +125°C.
QDielectric withstanding voltage: 500 Vac
QIns. resistance: 5000 megohms min.
QFrequency range: DC – 40 GHz
QVSWR: 1.10 + (.005 x Freq GHz)
Q50 ohm nominal impedance
QInsertion loss: .04 x √(Freq in GHz)
QRF leakage: -(90 – Freq GHz)
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28 condition VI, letter J
Construction
QCenter contact: copper alloy, 50
microinches gold over nickel plating
QDielectric: PTFE per ASTM D-1710
QFemale body: copper alloy, 50
microinches gold over nickel plating
QMale body: stainless steel, passivated
QMale contact spring: high carbon steel
(music wire), nickel plated
Connector Compatibility
QMIL-DTL-38999 Series I, II, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 79 Micro-Crimp®
QGlenair Series 80 Mighty Mouse
Male Contact 852-024-01
.261(6.63) .623(15.82)
Ø.182/.179
(4.62/4.55)
Ø.150 (3.81) .033/.029
(0.84/0.74)
Ø.162/.158
(4.11/4.01)
CABLE (REF)
SOLDER
Male Contact 852-032-01
.470/.464
(11.94/11.79)
.751 (19.08)
.291/.287
(7.39/7.29)
Ø.092/.088
(2.34/2.24)
Ø.152/.148
(3.86/3.76)
.034/.030
(0.86/0.76)
.088/.085
(2.24/2.16)
Ø.182/.178
(4.62/4.52)
Ø.162/.158
(4.11/4.01)
Size 12 50 Ohm SMPM-Type Coaxial Contacts for DC – 40 GHz
Cable Female Contact
(Use in Pin
Connectors)
Male Contact
(Use in Socket Connectors)
M38999 Series I,
III, IV M38999 Series II
Series 79, 80
RG-405 Flex
(Times Microwave TFlex-405)
Tensolite LLF-1087)
-- -- --
Spring-Loaded Microwave Frequency Coaxial Contacts
Female Contact 852-025-01
Ø.182/.179
(4.62/4.55)
Ø .095/.091
(2.41/2.31)
Ø .093/.089
(2.36/2.26)
Ø.150
(3.81) Ø.120
(3.05)
.033/.029
(0.84/0.74)
.300/.295
(7.62/7.49)
.558 (14.18)
.470 (11.94)
SOLDER HOLE
Q DC – 40 GHz frequency range
Q 50 ohm impedance
Q Aerospace-grade construction
Q SMPM-type Interface per MIL-DTL-348
Q Spring-loaded interface
Q Low insertion loss
Q Solderless center contact
Q VSWR 1.3 at 40 GHz
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Cable Prep Dimensions for 852-024 and 852-025
Slide prepped cable into contact, then solder cable braid to contact body.
See Assembly Instruction Sheet AI85009 for complete termination
instructions.
90º
.140 ± .010
(3.56 ± 0.25)
.090 ± .010
(2.29 ± 0.25)
PRE-TINNED
CABLE BRAID
.005 (0.13) MIN
BREAK EDGE
Cable Prep Dimensions for 852-032
Slide prepped cable into contact, then solder cable braid to contact body.
See Assembly Instruction Sheet AI85010 for complete termination
instructions.
90º
.135 ± .010
(3.43 ± 0.25)
.090 ± .010
(2.29 ± 0.25)
PRE-TINNED
CABLE BRAID
.005 (0.13) MIN
BREAK EDGE
Size #12 SMPM-Type Contacts for DC – 40 GHz
Tex®-405 Microwave Cable
SOLID SILVER-PLATED
COPPER
.0201 (0.511) DIA.
FEP JACKET
.104 (2.64) DIA.
SILVER-PLATED
COPPER BRAID
.085 (2.16) DIA.
SOLID PTFE
.064 (1.63) DIA.
SILVER-PLATED
COPPER FLAT
RIBBON TAPE
Glenair Part No. --
Mfgr Part No. TFlex®-
Manufacturer Times Microwave
Impedance (ohms)
Shielding Eectiveness (dB) >dB
Temperature Rating - °C to + °C
Minimum Bend Radius . in. (. mm.)
Weight (lbs/ft.) .
Capacitance (pF/ft) .
Velocity of Propagation % .
Cuto Frequency GHz
Attenuation and Power dB/ ft Watts
MHz .
MHz .
GHz .
GHz .
GHz .
GHz .
GHz .
. GHz .
GHz .
GHz .
LLF-1087 Microwave Cable
SOLID SILVER-PLATED
COPPER-COATED
STEEL
.0201 (0.511) DIA.
FEP JACKET
.105 (2.67) DIA.
SILVER-PLATED
COPPER BRAID
.085 (2.16) DIA.
SOLID PTFE
.064 (1.63) DIA.
SILVER-PLATED
COPPER FLAT
RIBBON TAPE
Manufacturer Part No. LLF-
Manufacturer Tensolite
Impedance (ohms)
Shielding Eectiveness (dB)
Minimum Bend Radius . in. (.mm)
Weight (lbs/ft.) .
Capacitance (pF/ft)
Velocity of Propagation %
Attenuation dB/ ft
MHz .
GHz .
GHz .
GHz .
GHz .
Spring-Loaded Microwave Frequency Coaxial Contacts
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable
Twinax Contacts
Concentric twinax contacts accept M17/176-00002 shielded twisted pair databus cable.
These snap-in, rear-release contacts fit Glenair Series 80 Mighty Mouse connectors and
MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities. Crimp termination. Gold-
plated copper alloy , uoroplastic dielectric. Supplied unassembled with heatshrink boot.
SAE AS39029 qualied.
Size #8 Concentric Twinax Contacts
Cable Pin Contact Socket Contact
M17/176-00002 ---
(M39029/113-625)
---
(M39029/114-628)
Pin Contact
Socket Contact
Pin Contact 853-003-08-625 (M39029/113-625)
.900 (22.9) MAX
AFTER
TERMINATION
Ø .276/.271
(7.01/6.88)
ø .0240 ± .0005
(0.61 ± 0.013)
.320
(8.13)
MAX
Ø .316/.313
(8.03/7.95)
Ø .219/.217
(5.56/5.51)
.033/.029
(0.84/0.74)
Socket Contact 853-004-08-628 (M39029/114-628)
Ø .276/.271
(7.01/6.88)
CENTER CONTACT
MATES WITH
ø .0240 ± .0005
(0.61 ± 0.013) PIN
.631 (16.03)
MAX
Ø
.316/.313
(8.03/7.95)
Ø .288/.284
(7.32/7.21)
.900 (22.9) MAX
AFTER
TERMINATION
.033/.029
(0.84/0.74)
Optional Sealing Boot
Sealing boots, purchased separately, provide
improved environmental seal compared to
heatshrink boot supplied with contacts.
Heatshrink Boot
Supplied with contact. Slide onto cable before
terminating contact. Slide onto contact after
the cable is terminated. Apply heat to shrink
the boot and melt the adhesive. Install contact
into connector.
Wire Dia. Part No.
.090 – .130 (2.3 – 3.3) --
HOT MELT
ADHESIVE
Ø .15 (25)
MIN
Ø .26
(6) MIN
.90 ± .03
(23 ± 0.8)
Technical Data
Specifications
QOperating temperature: -65°C. to +175°C.
QDielectric withstanding voltage, center
contact to intermediate contact: 1000
Vrms sea level, 250 Vrms at 70,000 feet
QDielectric withstanding voltage,
intermediate contact to outer contact:
500 Vrms sea level, 250 Vrms at 70,000 feet
QContact resistance, center and
intermediate contacts: 55 millivolt max.
voltage drop @ 1 ampere
QContact resistance, outer contact: 75
millivolt max. voltage drop @ 12 A.
QDurability: 500 mating cycles
QShock: MIL-DTL-38999 Series III
QVibration: MIL-DTL-38999 Series III
Construction
QCenter contact, intermediate contact
and outer contact: copper alloy, 50
microinches gold over nickel plating
QDielectric: PEEK and PTFE
QSocket contact hood: stainless steel,
passivated
QHeatshrink boot: cross-linked
polyvinylidene fluoride, transulcent
blue, with thermoplastic hot melt
adhesive
Connector Compatibility
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 80 Mighty Mouse
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable
Twinax Contacts
Center Contact Crimp Tools
-
(M22520/2-01)
-
(M22520/2-37)
Removal Tool
-
(M81969/14-12)
Intermediate Contact and Outer Sleeve
Crimp Tools
-
(M22520/5-01)
-
(M22520/5-105)
Crimp Tools
Contact Part
Number Center Contact Intermediate Contact Outer Crimp Sleeve
Crimper Positioner Crimper Hex Die Crimper Hex Die
853-003-08-625
853-004-08-628
-
(M22520/2-01)
-
(M22520/2-37)
-
(M22520/5-01)
-
(M22520/5-105)
-
(M22520/5-01)
-
(M22520/5-105)
M17/176-00002 Shielded Twisted Pair Databus Wire (Ref)
#24 AWG 19/36
SILVER-COATED
COPPER
.024 (0.61) DIA.
PFA JACKET
.129 (3.28) DIA.
SILVER-PLATED
COPPER BRAID
.102 (2.59) DIA.
PTFE
INSULATION
.042 (1.07) DIA.
Military Specication MIL-DTL-/
Military Part Number M/-
Continuous working voltage Vrms, maximum
Operating frequency MHz, maximum
Characteristic Impedance (ohms) ± at MHz
Temperature Rating -° to +° C
Minimum Bend Radius . in. (mm.)
Weight (lbs/ , ft.)
Capacitance (pF/ft)
Attenuation . dB per feet, maximum at MHz
Velocity of Propagation %
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 concentric twinax contacts accept 100 ohm #24 AWG controlled impedance shielded
twisted pair databus cable. These snap-in, rear-release contacts t Glenair Series 80 Mighty
Mouse connectors and MIL-DTL-38999 Series I, III and IV connectors with size #8 cavities.
Crimp termination. Gold-plated copper alloy. Supplied unassembled with heatshrink boot
and assembly instruction sheet.
Size #8 Concentric Twinax Contacts
Cable Pin Contact Socket Contact
TE Raychem 0024A0024
Gore GSC-03-81416-00 - -
Pin Contact
Socket Contact Pin Contact 853-011
Ø .316/.313
(8.03/7.95)
.900/.840
(22.9/21.3) .033/.029
(0.84/0.74)
CENTER PIN DIA.
Ø .0240 ± .0005
(0.61 ± 0.013)
Ø .219/.217
(5.56/5.51)
.220 (5.59)
HEX AFTER
CRIMP
SHRINK
BOOT
Socket Contact 853-012
.631 (16.03)
MAX
Ø .316/.313
(8.03/7.95)
Ø .288/.284
(7.32/7.21)
.033/.029
(0.84/0.74)
.900/.840
(22.9/21.3)
.220 (5.59)
HEX AFTER
CRIMP
SHRINK
BOOT
Size #8 Concentric Twinax Contacts for 100 Ohm Twisted Pair Cable
Twinax Contacts
Technical Data
Specications
QOperating temperature: -65°C. to
+175°C.
QDielectric withstanding voltage, center
contact to intermediate contact: 1000
Vrms sea level, 250 Vrms at 70,000 feet
QDielectric withstanding voltage,
intermediate contact to outer contact:
500 Vrms sea level, 250 Vrms at 70,000 feet
QContact resistance, center and
intermediate contacts: 55 millivolt max.
voltage drop @ 1 ampere
QContact resistance, outer contact: 75
millivolt max. voltage drop @ 12 A.
QDurability: 500 mating cycles
QShock: MIL-DTL-38999 Series III
QVibration: MIL-DTL-38999 Series III
Construction
QCenter contact, intermediate contact
and outer contact: copper alloy, 50
microinches gold over nickel plating
QDielectric: PEEK and PTFE
QSocket contact hood: stainless steel,
passivated
QHeatshrink boot: cross-linked
polyvinylidene fluoride, transulcent
blue, with thermoplastic hot melt
adhesive
Connector Compatibility
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine®
QGlenair Series 80 Mighty Mouse
Optional Sealing Boot
Sealing boots, purchased separately, provide
improved environmental seal compared to
heatshrink boot supplied with contacts.
Heatshrink Boot
Supplied with contact. Slide onto cable before
terminating contact. Slide onto contact after
the cable is terminated. Apply heat to shrink
the boot and melt the adhesive. Install contact
into connector.
Wire Dia. Part No.
.090 – .130 (2.3 – 3.3) --
HOT MELT
ADHESIVE
Ø .15 (25)
MIN
Ø .26
(6) MIN
.90 ± .03
(23 ± 0.8)
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 Concentric Twinax Contacts for 100 Ohm #24 AWG Twisted Pair Cable
Twinax Contacts
Center Contact Crimp Tools
-
(M22520/2-01)
-
(M22520/2-37)
Removal Tool
-
(M81969/14-12)
Intermediate Contact and Outer Sleeve
Crimp Tools
-
(M22520/5-01)
-
(M22520/5-105)
Crimp Tools
Contact Part
Number Center Contact Intermediate Contact Outer Crimp Sleeve Instruction
Sheet
Crimper Positioner Crimper Hex Die Crimper Hex Die
853-011
853-012
-
(M22520/2-01)
-
(M22520/2-37)
-
(M22520/5-01)
-
(M22520/5-105)
-
(M22520/5-01)
-
(M22520/5-105) AI853-011
Raychem 0024A0024 100 Ohm #24 AWG Twisted Pair
Cable
#24 AWG 19/36
SILVER-COATED
COPPER
.025 (0.64) DIA.
MODIFIED FEP
JACKET
.149 (3.78) DIA.
#38 AWG
TIN-COATED
COPPER BRAID
.125 (3.18) DIA.
FOAMED FEP
INSULATION
.054 (1.37) DIA.
MODIFIED ETFE
FILLERS
Characteristic Impedance ± ohms @ MHz
capacitance, mutual pF/ft. (nominal)
Velocity of Propagation % (nominal)
Conductor resistance . ohms/ ft (nominal)
Dielectric Withstanding Voltage Vrms
Temperature Rating - °C to + °C
Gore GSC-03-81416-00 #24 AWG Twisted Pair Cable
CONDUCTOR
24 AWG 19X36
SILVER
PLATED HS
COPPER
ALLOY
WIRE INSULATION
FEP OVER
EXPANDED PTFE,
0.40 mm MAX WALL
WHITE, BLUE
BINDER
GORE-TEX
TAPE
BRAID SHIELD
38 AWG
SILVER-PLATED
COPPER BRAID
95% MIN.
COVERAGE
JACKET
FEP 3.8 mm MAX,
TRANSPARENT
FILLERS
PTFE
Characteristic Impedance ± ohms @ MHz
capacitance, mutual pF/m. (nominal)
Velocity of Propagation % (nominal)
Conductor resistance ohms/km (nominal)
Dielectric Withstanding Voltage Vrms
Temperature Rating - °C to + °C
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #12 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable
Twinax Contacts
Size #12 concentric twinax contacts accept M17/176-00002 shielded twisted pair databus
cable. These snap-in, rear-release contacts t MIL-DTL-38999 Series I, III and IV connectors
with size #12 cavities, and Glenair Series 23 SuperNine® connectors. Crimp termination.
Gold-plated copper alloy. Interface is in accordance with JN1104, DSCC 02003 and DSCC
02004 specications.
Size #12 Concentric Twinax Contacts
Cable Pin Contact Socket Contact
M17/176-00002 -- --
Pin Contact 853-008-1
.033/.029
(0.84/0.74)
Ø.182/.179
(4.62/4.55)
Ø.151/.148
(3.85/3.76)
Ø.095/.093
(2.41/2.36)
.300/.295
(7.62/7.49) .270 (6.86)
MAX
Ø.0155/.0145
(0.394/0.368)
Socket Contact 853-009-1
.626/.620
(15.90/15.75)
.896 (22.76) MAX
Ø.161 (4.09)
MAX
Ø.0547/.0535
(1.38/1.36) .033/.029
(0.84/0.74)
Ø.182/.179
(4.62/4.55)
Ø.151/.148
(3.85/3.76)
INTERMEDIATE
CONTACT
OUTER CONTACT
MATES WITH
Ø.095/.093
(2.41/2.36) PIN
M17/176-00002 Shielded Twisted Pair Databus Wire (Ref)
Military Specication MIL-DTL-/
Military Part Number M/-
Continuous working voltage Vrms, maximum
Operating frequency MHz, maximum
Characteristic Impedance ± at MHz
Temperature Rating -° to +° C
Minimum Bend Radius . in. (mm.)
Weight (lbs/ , ft.)
Capacitance (pF/ft)
Attenuation . dB per feet, max. at MHz
Velocity of Propagation %
Technical Data
Specications
QOperating temperature: -65C. to +175C.
QOperating frequency: 0 – 20 MHz
QDielectric withstanding voltage, center
contact to intermediate contact: 800
Vrms
QDielectric withstanding voltage,
intermediate contact to outer contact:
500 Vrms
QContact resistance, center and
intermediate contacts: 55 millivolt max.
voltage drop @ 1 ampere
QContact resistance, outer contact:
75 millivolt max. voltage drop @ 12
amperes
QDurability: 500 mating cycles
QShock: EIA-364-27 condition D
QVibration: EIA-364-28
Construction
QCenter contact, intermediate contact,
outer contact, rear bushing: copper
alloy, 50 microinches gold over nickel
plating
QInner and outer crimp sleeves: copper
alloy, 50 microinches gold over nickel
plating
QRear bushing: copper alloy, 50
microinches gold over nickel plating
QInsulators: PEEK, PTFE
QSocket contact hood: stainless steel,
passivated
Connector Compatibility
QMIL-DTL-38999 Series I, III and IV
QGlenair Series 23 SuperNine®
#24 AWG 19/36
SILVER-COATED
COPPER
.024 (0.61) DIA.
PFA JACKET
.129 (3.28) DIA.
SILVER-PLATED
COPPER BRAID
.102 (2.59) DIA.
PTFE
INSULATION
.042 (1.07) DIA.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pin Contact Details
FRONT
INSULATOR
INTERMEDIATE
SOCKET CONTACT OUTER
INSULATOR
REAR
INSULATOR
INNER CRIMP
SLEEVE
OUTER CRIMP
SLEEVE
MIDDLE
INSULATOR PIN BODY
INNER PIN
CONTACT REAR
BUSHING
OUTER CONTACT ASSEMBLY INNER CONT ACT ASSEMBLY
Size #12 Concentric Twinax Contacts for M17/176-00002 Shielded Twisted Pair Cable
Twinax Contacts
Center Contact Crimp Tools Intermediate Contact Crimp Tools Outer Contact Crimp Tools Installation/
Removal Tool
-
(MH992)
-
(K1365)
-
(GS212)
-
(GP1437)
-
(M22520/31-01)
-
(GP959)
-
(M81969/14-04)
Crimp Tools, Installation/Removal Tool, Assembly Instruction Sheet
Contact Part
Number
Crimp Tools Insertion/
Removal Tool Assembly
Instruction Sheet
Inner Contact Intermediate Contact Outer Contact
Crimper Positioner Crimper Positioner Crimper Hex Die
853-008-1
853-009-1 -
(MH992) -
(K1365) -
(GS212) -
(GP1437) -
(M22520/31-01) -
(GP959) -
(M81969/14-04)AI85021
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts Rev. ..
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 Differential Twinax Contacts
Twinax Contacts
Technical Data
Specifications Construction Connector Compatibility
Operating temperature: -65°C. to +175°C.
Operating frequency: consult factory
Dielectric withstanding voltage, inner
contact to inner contact: 1000 Vrms
Dielectric withstanding voltage, inner
contact to outer body: 500 Vrms
Insulation resistance: 5000 megohms min.
Contact resistance, inner contacts: 55
millivolt max. voltage drop @ 1 ampere
Contact resistance, outer body: 75 millivolt
max. voltage drop @ 12 amperes
Durability: 500 mating cycles
Shock: EIA-364-27 condition D
Vibration: EIA-364-28 condition VI, letter J
Inner contacts, outer body: copper alloy,
50 microinches gold over nickel plating
Crimp ferrule: copper alloy, 50
microinches gold over nickel plating
Insulators: PPS
Sealing boot: fluorosilicone rubber
grommet, glass-filled PEI follower
Differential twinax contacts have an
alignment key and are not for use in
standard MIL-DTL-38999 connectors
Glenair 233-217 MIL-DTL-38999 Series III
connectors with keyed inserts for contact
alignment.
Glenair Series 80 Mighty Mouse.
All standard Mighty Mouse connectors with
size #8 contacts have keyed contact cavities
for proper alignment of differential twinax,
quadrax, and octaxial contacts.
Size #8 Differential Twinax Contacts
Shielded Twisted Pair Cable Wire Size
(AWG) Impedance
(ohms) Pin Contact Socket
Contact
GSC-03-83971-00
(Gore) 24 100 --F --F
0024A0024
(TE Raychem) 24 100 --F --F
M17/176-00002
(MIL-DTL-17) 24 77 --F --F
24443/52088X2
(Tensolite ref: 5M2022-003) 24 75 --F --F
ST5M1212-002
(McDonnell Douglas) 24 68 --F --F
DXN2603
(Gore) 26 100 --F --F
7726D0664
(TE Raychem) 26 77 --F --F
Pin Contact
Socket Contact
Dierential twinax contacts accept shielded twisted pair cable. These snap-in, rear-release
contacts t Glenair Series 80 Mighty Mouse connectors and Glenair 233-217 MIL-DTL-38999
type connectors with keyed inserts. Crimp termination. 24 and 26 AWG versions. 68 ohm, 75
ohm, 77 ohm and 100 ohm impedance. Gold-plated copper alloy. Supplied unassembled
with sealing boot and instruction sheet.
Sealing Boot
Sealing boots are supplied with contacts. To order contacts without sealing boots, delete the “F” sux from the part number
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pin Contact 853-014 and 853-025
432
1
Ø .276/.271
(7.01/6.88)
POLARIZATION KEY
.111 (2.82)
ø .0250 ± .0005 (0.64 ± 0.013)
TWO PLACES
.305/.295
(7.75/7.49)
Ø .316/.313
(8.03/7.95)
Ø .219/.217
(5.56/5.51)
.218 (5.54)
HEX CRIMP
.900/.840
(22.9/21.3)
.033/.029
(0.84/0.74)
Size #8 Differential Twinax Contacts
Twinax Contacts
Socket Contact 853-013 and 853-024
.631/.625
(16.02/15.88)
Ø .288/.284
(7.32/7.21)
.111 (2.82)
Ø .316/.313
(8.03/7.95)
Ø .276/.271
(7.01/6.88)
.218 (5.54)
HEX CRIMP
POLARIZATION KEY
SKT TO ACCEPT .025 (0.64) PIN
2 PLACES
.900/.840
(22.9/21.3)
.033/.029
(0.84/0.74)
INNER CRIMP
BUSHING
Crimp Tools, Removal Tool, Assembly Instruction Sheet
Contact Part
Number
Inner Contacts Outer Body Removal Tool Assembly
Instruction Sheet
Crimper Positioner Crimper Hex Die
853-013
853-014
853-024
853-025
-
(M22520/2-01)-
(M22520/2-37) -
(M22520/5-01) -
(M22520/5-45) -
(M81969/14-12)AI85007
Inner Contact Crimp Tools
-
(M22520/2-01)
-
(M22520/2-37)
Removal Tool
-
(M81969/14-12)
Outer Body Crimp Tools
-
(M22520/5-01)
-
(M22520/5-45)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 Differential Twinax Contacts
Twinax Contacts
Raychem 0024A0024 100 Ohm 24
AWG Twisted Pair Cable
#24 AWG 19/36
SILVER-COATED
COPPER
.025 (0.64) DIA.
MODIFIED FEP
JACKET
.149 (3.78) DIA.
#38 AWG
TIN-COATED
COPPER BRAID
.125 (3.18) DIA.
FOAMED
FEP
INSULATION
.054 (1.37)
DIA.
MODIFIED
ETFE
FILLERS
Impedance ± ohms @ MHz
DWV rating Vrms
Temperature Rating -° to +° C
ST5M1212-002
68 Ohm 24 AWG Twisted Pair Cable
#24 AWG 19/36
SILVER-COATED
COPPER
.025 (0.64) DIA.
FEP JACKET
.124 (3.15) DIA.
#38 AWG
SILVER PLATED
COPPER BRAID
.106 (2.69) DIA.
PTFE
INSULATION
.044 (1.12)
DIA.
Impedance ± ohms
DWV rating Vrms
Temperature Rating -° to +° C
Raychem 7726D0664-9
77 Ohm 26 AWG Twisted Pair Cable
#26 AWG 19/38
SILVER-COATED
HS COPPER
.020 (0.51) DIA.
CROSS-LINKED
MODIFIED
ETFE JACKET
.107 (2.72) DIA.
#38 AWG TIN
PLATED COPPER
BRAID
.091 (2.31) DIA.
CROSS-LINKED
MODIFIED
ETFE
INSULATION
.037 (0.94) DIA.
MODIFIED
ETFE
FILLERS
.025 (0.64)
DIA.
Impedance ± ohms @ MHz
DWV rating Vrms
Temperature Rating -° to +° C
M17/176-00002
Shielded Twisted Pair Databus Cable
#24 AWG 19/36
SILVER-COATED
COPPER
.024 (0.61) DIA.
PFA JACKET
.129 (3.28) DIA.
SILVER-PLATED
COPPER BRAID
.102 (2.59) DIA.
PTFE
INSULATION
.042 (1.07) DIA.
Impedance (ohms) ± at MHz
DWV Rating Vrms
Temperature Rating -° to +° C
Tensolite 24443/52088X2
75 Ohm 24 AWG Twisted Pair Cable
#24 AWG 19/36
SILVER-COATED
COPPER
.024 (0.61) DIA.
FEP JACKET
.128 (3.25) DIA.
SILVER-PLATED 38
AWG COPPER BRAID
90% MIN. COVERAGE
.110 (2.79) DIA.
PTFE
INSULATION
.046 (1.17) DIA.
Impedance (ohms) ±
DWV Rating Vrms
Temperature Rating -° to +° C
Gore GSC-03-83971-00
100 Ohm 24 AWG Twisted Pair Cable
#24 AWG 19/36
SILVER-COATED
COPPER
FEP
JACKET
.154 (3.9)
MAX DIA.
#38 AWG
SILVER-COATED
HIGH STRENGTH
COPPER ALLOY
BRAID
>90% COVERAGE
ALUMINIZED
POLYIMIDE FOIL
FEP OVER
EXPANDED
PTFE
INSULATION ePTFE
FILLERS
Impedance ± ohms
DWV Rating Vrms
Temperature Rating -° to +° C
Gore DXN2603
100 Ohm 26 AWG Twisted Pair Cable
#26 AWG 19/38
SILVER-COATED
COPPER ALLOY
.
PTFE
JACKET
#40 AWG
SILVER-COATED
COPPER ALLOY
BRAID
ePTFE
INSULATION
.049 (1.24) DIA.
.100 (2.54)
Impedance ± ohms
Attenuation . dB / ft. @ GHz
Temperature Rating +° C
Shielded Twisted Pair Cables for Differential Twinax Contacts
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #12 Ultra-Fast Differential Twinax Contacts for DC – 10 GHz Frequency Range
Ultra-Twinax Contacts
Glenair Ultra-Twinax differential twinax contacts are suited for multi-gigabit data rate
applications such as CML, LVDS and other advanced digital communications protocols. Size
#12 100 ohm contacts feature DC – 10 GHz frequency range. Use with high-speed #30 AWG
twisted pair cable 963-102-30. These contacts are compatible with Glenair Series 80 Mighty
Mouse connectors with size #12 cavities. Snap-in, rear release. Solder termination. Supplied
as kit with body, front insulator-solder contact subassembly, and rear insulator. Gold-plated
copper alloy, glass-lled PTFE insulator.
Size #12 Ultra-Twinax Contacts
Cable Wire Size
(AWG) Impedance
(ohms) Pin Contact Socket
Contact
Assembly
Instruction
Sheet
963-102-30
(Glenair) 30 100 -- -- AI85051
Socket Contact Design Features
HOOD BODY REAR
INSULATOR 30 AWG TWISTED
PAIR CABLE
FRONT
INSULATOR SOLDER
TERMINATIONS
PIN
CONTACTS
Pin Contact Design Features
BODY REAR
INSULATOR 30 AWG TWISTED
PAIR CABLE
FRONT
INSULATOR
SOLDER
TERMINATIONS
SOCKET
CONTACTS
Features
QDC – 10 GHz frequency range
Q100 ohm impedance
QAerospace-grade construction
QLow insertion loss
Applications
QLVDS
QSATA 3.0
QDisplayPort
QCML
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -65C. to +105C.
QOperating frequency: 0 – 10 GHz
QImpedance: 100 ohms
QVSWR: 1.1 + (.03 X Freq GHz)
QInsertion loss : (.33 X Freq GHz)
QDielectric withstanding voltage: 500 Vrms
QInsulation resistance: 5000 megohms min.
QDurability: 500 mating cycles
QInner contacts, outer body: copper alloy,
50 microinches gold over nickel plating
QInsulator: glass-filled PTFE
QRear insulator: PPS
QSocket hood: stainless steel, passivated
QGlenair Series 80 Mighty Mouse.
All standard Mighty Mouse connectors with
size #12 contact accommodation have
keyed contact cavities for proper alignment
of ultra-twinax contacts.
Pin Contact
Socket Contact
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #12 Ultra-Fast Differential Twinax Contacts for DC – 10 GHz Frequency Range
Twinax Contacts
963-102-30 100 Ohm Twisted Pair Cable Specications
Conductors 30 AWG silver-coated high strength
copper alloy, 19/42 strand
#30 AWG 19/42
SILVER-COATED
HIGH STRENGTH
COPPER ALLOY
PFA
INSULATION
#40 AWG
SILVER-COATED
HIGH STRENGTH
COPPER ALLOY
BRAID
PFA JACKET,
BLACK
.107 ± .006
(2.72 ± 0.15)
.032 ± .002
(0.81 ± 0.05)
Insulation PFA, white and yellow, .032 dia.
Inner shield .0015" aluminum/polyester tape
Outer shield Silver-coated 40 AWG braid, 90%
minimum coverage
Jacket PFA, black
Temperature Rating -65° to +105° C
Impedance 100 ± 10 ohms
Capacitance 15.0 pF/ft (cond-cond)
DC resistance 98.55 ohms/1000 ft. maximum
Attenuation (nominal) 40 dB @ 500 MHz, 56dB @ 1 GHz
Velocity of Propagation 80%
Part Number
963-102-30
Socket Contact 853-015-01Pin Contact 853-016-01
.033/.030
(0.84/0.76)
.300/.296
(7.62/7.52)
.560 (14.22) MAX
Ø.151 (3.84)
MAX
Ø.126
(3.20)
MAX
Ø.096
(2.44)
MAX
.025/.017
(0.64/0.43)
.040 (1.02)
ALIGNMENT
KEY
CAVITY IDENTIFICATION
SHOWN FOR REFERENCE
ONLY AND IS NOT MARKED
ON CONTACT
Ø.182
(4.62)
MAX
B
A
B
A
.290/.280
(7.37/7.11)
.550 (13.97)
MAX Ø.151
(3.84)
MAX
ALIGNMENT
KEY
.033/.030
(0.84/0.76)
Ø.188 (4.78)
MAX Ø.126
(3.20)
MAX
CAVITY
IDENTIFICATION
SHOWN FOR
REFERENCE
ONLY AND IS NOT
MARKED ON
CONTACT
Ø.161 (4.09)
MAX
.040 (1.02)
Performance Data
1.100
1.200
1.300
1.400
1.500
1.600
1.700
1.800
1.900
2.000
VSWR
Frequency (GHz)
02.0 4.0 6.0 8.0 10.0 12.0
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1Insertion Loss
Insertion Loss (dB)
Frequency (GHz)
02.0 4.0 6.0 8.0 10.0
Cable and Contacts
Cable Only (47 in.)
Contacts Only
VSWR
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 100 Ohm and 150 Ohm Quadrax Contacts
Quadrax Contacts
Size #8 100 Ohm Quadrax Contacts
Wire
Size
(AWG)
Imped.
(ohms)
Ref Cable
Diameter A Hex Crimp Cable Accomodation Pin Contact Socket Contact
In. mm. In. mm. Mfgr. Part Number
22 100 .190 4.83 .231 5.86 Tensolite NF22Q100-01 --F --F
24 100 .160 4.06 .218 5.54
PIC E51424
--F --F
(various) AS6070-1
Gore GSC-03-84608-00
Tensolite NF24Q100-01
TE CEC-RWC-18664
24 100 .175 4.45 .218 5.54 Draka F 4704-4
--F --F
PIC E50424
(various) ABS1503KD24
26 100 .137 3.48 .218 5.54 Tensolite NF26Q100-01 --F --F
PIC E51426
Size #8 150 Ohm Quadrax Contacts for Fibre Channel (not intermateable with 100 ohm quadrax contacts)
26 150 Fibre
Channel .195 4.95 .231 5.86 Tensolite 26473/02006X-4(LD) --F --F
Gore RCN8328
Socket Contact
QDC – 3 GHz frequency range
Q100 ohm and 150 ohm versions
QArinc 664 compatible
QSnap-in, rear release
QSealing boot included
QGold plated copper alloy
Technical Data
Specications Construction Connector Compatibility
QOperating temperature: -65°C. to +175°C.
QOperating frequency: DC – 3 GHz
QCharacteristic Impedance: 100 ±10 ohms or 150
± 10 ohms
QDielectric withstanding voltage, inner to inner
contact: 1000 Vrms sea level, 250 Vrms 70,000
feet.
QDielectric withstanding voltage, inner to outer
contact: 500 Vrms sea level, 250 Vrms 70,000 feet.
QInsulation resistance: 5000 megohms min.
QDurability: 500 mating cycles
QVibration: MIL-DTL-38999 Series III
QShock: MIL-DTL-38999 Series III
QInner contacts, outer contact,
shield crimp ferrule: copper alloy, 50
microinches gold over nickel plating
QInsulator: PPS
QSealing boot grommet: fluorosilicone
QSealing boot body: rigid thermoplastic,
PEI or equivalent
QQuadrax contacts have an
alignment key and are not for
use in standard MIL-DTL-38999
connectors
QGlenair Series 80 Mighty Mouse
QGlenair 233-217 SuperNine®
Quadrax contacts are size 8 multi-pin contacts with four signal pins and an outer contact
body. These contacts are used for harsh environment military and aerospace data networks
using star quad cable. Crimp termination. Two types are available: 100 ohm for 100BASE-T
Ethernet and 150 ohm for bre channel. Compatible with Glenair Series 80 Mighty Mouse
and Glenair 233-217 SuperNine® connectors. Supplied as unassembled kit with outer body,
(4) inner contacts, shield crimp ferrule, insulators, sealing boot and instruction sheet.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pin Contact 854-001 and 854-015
432
1
432
1
.920
(23.37)
Ø .276/.271
(7.01/6.88)
.111 (2.82)
.111 (2.82)
.033/.029
(0.84/0.74)
.305/.295
(7.75/7.49)
A HEX CRIMP
Ø .316/.313
(8.03/7.95)
Ø .219/.217
(5.56/5.51)
POLARIZATION
KEY
PIN NO. DESIGNATION
(NOT MARKED ON
PART)
INNER PIN DIAMETER
100 OHM: Ø .025 (0.64)
150 OHM: Ø .020 (0.51)
Size #8 100 Ohm and 150 Ohm Quadrax Contacts
Quadrax Contacts
Socket Contact 854-002 and 854-014
4
3
21
.770 (19.56)
.111 (2.82)
.111 (2.82)
.631/.625
(16.02/15.88)
Ø .316/.313
(8.03/7.95)
Ø .288/.284
(7.32/7.21)
.033 (0.84)
.029 (0.74)
Ø .276/.271
(7.01/6.88)
A HEX CRIMP
POLARIZATION
KEY
PIN NUMBER DESIGNATION
(REF ONLY, NOT MARKED ON
PART)
SOCKET TO ACCEPT
INNER PIN DIAMETER
100 OHM: Ø .025 (0.64)
150 OHM: Ø .020 (0.51)
Quadrax Contact Cutaway
MIDDLE
INSULATOR
REAR
INSULATOR
STAR QUAD
CABLE
SHIELD
FERRULE
FRONT
INSULATOR
INNER
CONTACTS (4)
OUTER
CONTACT
MIDDLE
INSULATOR
REAR
INSULATOR
STAR QUAD
CABLE
FRONT
INSULATOR
OUTER
CONTACT
SHIELD
FERRULE
INNER
CONTACTS (4)
Pin Contact Socket Contact
Crimp Tools, Removal Tool, Assembly Instruction Sheet
Contact
PN Inner Contacts Outer Body Removal
Tool Assembly
Instructions
Crimper Positioner Crimper Hex Die
854-001
854-002 -
(M22520/2-01) -
(M22520/2-37) -
(M22520/5-01) -
(M22520/5-45) -
(M81969/14-12) AI854-001
854-014
854-015 -
(M22520/2-01) -
(M22520/2-37) -
(M22520/5-01) -
(M22520/5-45) -
(M81969/14-12) AI85038
Inner Contact Crimp Tools Outer Body Crimp Tools Removal Tool
-
(M22520/2-01)
-
(M22520/2-37)
-
(M22520/5-01)
-
(M22520/5-45)
-
(M81969/14-12)
Sealing Boot
Sealing boots are supplied with contacts.
To order contacts without sealing boots,
remove the "F" sux from the part number.
.985 (25.02)
MAX
.326
(8.28)
.350
(8.89)
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
About Star Quad Cable
Star quad cables are widely used for 100 ohm ARINC
664 10/100BASE-T Ethernet and 150 ohm fibre
channel. Quad cable, when paired with quadrax
contacts, oers improved EMI protection and better
data integrity compared to shielded twisted data pair
cable terminated to individual connector pins.This
illustration depicts SAE AS6070/1 high speed data
quad cable. This construction, with two shields and
uoropolymer insulation, is typical of aerospace star
quad cables available from Gore, Carlisle (Tensolite),
PIC, TE, Draka and other cable manufacturers. The
table below lists standard star quad cables available
from Glenair.
Aerospace-Grade Star Quad Cable
Quadrax Contacts
Star Quad Cables Available From Glenair
Glenair Part No. - - - - - -
Manufacturer Part No. NFQ- NFQ- NFQ- E E E
Manufacturer Tensolite Tensolite Tensolite PIC PIC PIC
Construction Details
Conductor Size (AWG)
Conductor Material SCC SCCA SCCA SCC SCC SCC
Insulation Extruded PTFE over
fused PTFE tape
Extruded PTFE over
fused PTFE tape
Extruded PTFE over
fused PTFE tape PTFE Foamed FEP Foamed FEP
Insulation Color Pair 1: Red, Blue
Pair 2: Green, Yellow
Pair 1: Red, Blue
Pair 2: Green, Yellow
Pair 1: Red, Blue
Pair 2: Green, Yellow
Pair 1: Red, Blue
Pair 2: Green, Yellow
Pair 1: Red, Blue
Pair 2: Green, Yellow
Pair 1: Red, Blue
Pair 2: Green, Yellow
Binder PTFE PTFE PTFE PTFE PTFE
Shield Inner TCC at braid,
outer TCC round braid
Inner TCC at braid,
outer TCC round braid
Inner TCC at braid,
outer TCC round braid
Inner foil, outer SCC
round braid
Inner TCC at braid,
outer TCC round braid
Inner TCC at braid,
outer TCC round braid
Jacket FEP FEP FEP FEP ETFE ETFE
Jacket Color Translucent Blue Translucent Blue Translucent Blue Translucent Blue White White
Nominal Cable Diameter . . . (.) . (.) . (.) . (.)
Specications
Impedance (ohms)
Temperature Rating + °C + °C + °C + °C + °C + °C
Weight (lbs/ ft.) . . . . . .
Capacitance (pF/ft) .
Velocity of Propagation % .
Time Delay pS/ft
Max. Attenuation dB/ ft., MHz . . . . . .
Min. NEXT (dB), MHz . . .
Min. SRL (dB), MHz . . .
Notes
SCC silver-coated copper SCCA silver-coated copper alloy TCC tin-coated copper
Cables are Skydrol resistant, RoHS compliant and meet the FAA ammability requirements of FAR Part and , Appendix F
CONDUCTOR
24 AWG 19X36 SILVER
PLATED COPPER ALLOY
INSULATION
EXPANDED PTFE OR FOAMED FEP, PFA,
.046 INCH ± .003
PAIR 1: RED, BLUE PAIR 2: YELLOW, GREEN
BINDER
PTFE TAPE
FIRST SHIELD
FLAT SILVER-PLATED COPPER BRAID
92% MIN. COVERAGE
SECOND SHIELD
ROUND SILVER-PLATED COPPER BRAID
85% MIN. COVERAGE
JACKET
FEP .160 INCH ± .010
FILLER
FLUOROPOLYMER
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®
D38999 Series III and Mighty Mouse Quadrax Cables
Sample Part Number 854-035 F -A C -01 -12
Product - = Pre-wired
quadrax contact
Sealing Boot F = Add grommet follower
Omit for none
P1 Connector A = Quadrax, Pin (P/N 854-001)
B = Quadrax, Socket (P/N 854-002)
P2 Connector A = Quadrax, Pin C = RJ45 Plug
B = Quadrax, Socket N = No Connector
Cable Option
01 = Tensolite NF26Q100-01, 26 AWG
02 = Tensolite NF24Q100-01, 24 AWG
03 = Draka Fileca F 4704-6, 26 AWG
04 = Draka Fileca F 4704-4, 24 AWG
05 = Tensolite NF22Q100-01, 22 AWG
Length Overall length in inches
Aerospace-grade or commercial-grade cable. 100% tested. Save assembly time
and cost with quadrax cordset assemblies. These assemblies are available with
pin/pin, pin/socket, socket/socket, pin/RJ45 or socket/RJ45 congurations. Star
quad aerospace-grade high temperature cable has uoropolymer construction.
Compatible with Glenair Series 23 and Series 80 connectors. Optioinal sealing boot
available. Quadrax contacts must be installed in keyed connectors before mating to
prevent misalignment and contact damage.
Contact Positions
4
3
2
1
Mating face of Pin Mating face of Socket
Quadrax contact, Pin and Socket
Technical Data
QFor use with 100 BASE-T Ethernet
applications. For 1000 BASE-T
Ethernet applications, please consult
factory.
QRefer to individual contact and cable
data sheets for construction details
Q100% tested for shorts, continuity
and IR
QOperating temp.:
-65° to +125°C, aerospace-grade
Impedance: 100 ohms
QDWV: 500 Vrms
QIR: 5000 megohms min @ 200VDC.
Size #8 100 Ohm Quadrax Cable Assemblies, How-to-Order
854-035 Quadrax Cable Assemblies
GLENAIR D38999/III
QUADRAX CONTACT
(SEE TABLE)
A
A
C
B
B
P1 P2
(PART NUMBER)
GLENAR YYWW
(1.00)
OVERALL LENGTH ( SEE P/N DEVELOPMENT)
TOLERANCE IS:
(+1.80/-0.00) FOR "L" LESS THAN OR EQUAL TO 60.00 INCHES.
(+3%/-0.00) FOR "L" GREATER THAN 60.00 INCHES.
HARTING RJ45 PLUG:
09451511560 OR EQ.
Rev. 07.20.18
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®
Size #8 100 Ohm Quadrax Cable Assemblies, Wiring Dia
854-035 Quadrax Cable Assemblies
8
7
5
4
6
1
3
2
4
P1
BLU
RED
YEL
GRN
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
P1
RED
BLU
RED/BLK
BLU/BLK
22 AWG
22 AWG
22 AWG
22 AWG
WIRING DIAGRAM
22 AWG PIN OR SOCKET FLYING LEADS
WIRING DIAGRAM
24/26 AWG PIN OR SOCKET FLYING LEADS
P1 P2
RED
BLU
RED/BLK
BLU/BLK
22 AWG
22 AWG
22 AWG
22 AWG
WIRING DIAGRAM
22 AWG BACK TO BACK PIN TO SOCKET
P1
BLU
RED 24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
P2
WIRING DIAGRAM
24/26 AWG BACK TO BACK PIN TO SOCKET
P1
BLU
RED 24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
1
2
3
P2
WIRING DIAGRAM
24/26 AWG PIN OR SOCKET TO RJ45
YEL
GRN
YEL
GRN
4
1
3
2
4
1
3
2
4
1
3
2
4
1
3
2
4
1
3
2
4
1
3
2
2
3
1
4
2
3
1
4GRN
YEL
WIRING DIAGRAM
24/26 AWG PIN TO PIN OR SKT TO SKT
P2
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
RED
BLU
P1
Rev. 07.20.18
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 100 Ohm El Ochito® Contacts
El Ochito® Octaxial Contacts for 10G Ethernet
QDC – 4 GHz frequency range
Q100 ohms
QData pair isolation technology
Q50% size and weight savings
compared to quadrax contacts
QSnap-in, rear release
QSealing boot included
QGold plated copper alloy
Q10GBase-T compatible
Technical Data
Specications Construction
QOperating temperature: -65°C. to +175°C.
QOperating frequency: DC – 4 GHz
QCharacteristic Impedance: 100 ±10 ohms
QDielectric withstanding voltage, inner to
inner contact: 1000 Vrms sea level, 250
Vrms 70,000 feet.
QDielectric withstanding voltage, inner
to outer contact: 500 Vrms sea level, 250
Vrms 70,000 feet.
QInsulation resistance: 5000 megohms min.
QDurability: 500 mating cycles
QVibration: MIL-DTL-38999 Series III
QShock: MIL-DTL-38999 Series III
QInner contacts, outer contact,
shield crimp ferrule: copper alloy, 50
microinches gold over nickel plating
QFront, middle and rear insulator: PPS
QSealing boot grommet: fluorosilicone
QSealing boot body: rigid thermoplastic,
PEI or equivalent
Connector Compatibility
QEl Ochito® contacts have an alignment
key and are not for use in standard
MIL-DTL-38999 connectors
QGlenair Series 80 Mighty Mouse
QGlenair 233-217 SuperNine®
QARINC 600 quadraxial inserts
The 10G Ethernet
Contact with Patented
Data Pair Isolator
Technology
®
El Ochito® contacts are intended for harsh environment military and aerospace data networks
utilizing 1000BASE-T or 10GBASE-T protocols. El Ochito® contacts provide up to 50% total
weight savings compared to quadrax-based solutions. These contacts have eight signal pins
housed in a machined, gold plated outer contact. Crimp termination. Metal spline isolates
data pairs for improved signal integrity. For use with aerospace-grade 26 AWG Category
6a cables with unshielded or shielded data pairs. El Ochito® contacts snap into ARINC 600
connectors with quadrax inserts, along with Series 80 Mighty Mouse and Series 23 SuperNine®
connectors. Supplied as unassembled kit with outer body, (8) inner contacts, shield crimp
ferrule, insulators, and instruction sheet.
Size #8 El Ochito® Contacts for Aerospace High Speed Ethernet Cable
Connector Type Cable
Type Cable Description
Cable
Pin Contact Socket ContactMfgr.
Part Number Glenair Part
No.
ARINC 600
S/UTP Unshielded twisted
pairs, 26 AWG PIC
E6A3826 963-003-26 -- --
S/FTP Foil shields on individual
twisted pairs, 26 AWG Gore
RCN9047-26 963-033-26 -- --
Series 23 SuperNine®
Series 80 Mighty Mouse
S/UTP Unshielded twisted
pairs, 26 AWG PIC
E6A3826 963-003-26 --F --F
S/FTP Foil shields on individual
twisted pairs, 26 AWG Gore
RCN9047-26 963-033-26 --F --F
Pin Contact
Socket Contact
United States Patent Number
9,257,796
El Ochito® 10gbE Octaxial Contact Construction Details
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 100 Ohm El Ochito® Contacts
El Ochito® Octaxial Contacts for 10G Ethernet
Crimp Tools, Removal Tool, Assembly Instruction Sheet
Contact PN Inner Contacts Outer Body Removal
Tool Assembly
Instructions
Crimper Positioner Crimper Hex Die
858-003-01F
858-004-01F
809-015
(M22520/2-01)
859-101
(K1906)
809-129
(M22520/5-01)
859-007
(M22520/5-45)
859-049
(M81969/14-12)AI85048
858-009-01
858-010-01
809-015
(M22520/2-01)
859-101
(K1906)
809-129
(M22520/5-01)
859-007
(M22520/5-45)
859-049
(M81969/14-12)AI85074
858-009-02
858-010-02
809-015
(M22520/2-01)
859-101
(K1906) 859-145 (not required) 859-049
(M81969/14-12)
858-016-01F
858-017-01F
809-015
(M22520/2-01)
859-101
(K1906)
859-134
(GS206) (not required) 859-049
(M81969/14-12)
Sealing Boot
Sealing boots are supplied with 858-003, 858-
004, 858-016 and 858-017 contacts. To order
these contacts without sealing boots, delete the
“F” sux from the part number. Sealing boots are
not supplied with 858-009 and 858-010 contacts.
.93 (23.6)
Ø .370
(9.40)
SEALING BOOT FOR
OCHITO CONTACTS USING
.220 (5.59) DIAMETER
CABLE
687-754-8-8
Outer Contact
Front Insulator
Contact Organizer Insulator
Pin Contacts (8)
Plastic Bushing
Crimp Ferrule
Outer Contact
Data Pair Isolator
Front Insulator
Contact Organizer
Insulator
Socket Contacts (8)
Plastic Bushing
Crimp Ferrule
Pin Contact Socket Contact
Data Pair Isolator
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Size #8 100 Ohm El Ochito® Contacts
El Ochito® Octaxial Contacts for 10G Ethernet
858-003 and 858-016 El Ochito® Pin Contact for 233-217 SuperNine® and Series 80 Mighty Mouse
.920
(23.37)
MAX
Ø .276/.271
(7.01/6.88)
.060 (1.52)
.033/.029
(0.84/0.74)
.305/.295
(7.75/7.49)
SHIELD CRIMP
858-003: .231 (5.87) HEX
858-016: .265 (6.73) ROUND
Ø .316/.313
(8.03/7.95)
Ø .219/.217
(5.56/5.51)
POLARIZATION
KEY
PIN NO. DESIGNATION
(NOT MARKED ON
PART)
CABLE (REF) 123
4
5
6
7
8
858-009 El Ochito® Pin Contact for ARINC 600 Connectors with Quadraxial Inserts
.515/.505
(13.08/12.83)
POLARIZATION
KEY
.90
(22.9)
MAX .033/.029
(0.84/0.74)
Ø .316/.313
(8.03/7.95)
Ø .219/.217
(5.56/5.51)
Ø .276/.271
(7.01/6.88)
.075/.073
(1.91/1.85)
SHIELD CRIMP
858-009-01F: .231 (5.87) HEX
858-009-02F: .265 (6.73) ROUND PIN NO. DESIGNATION
(NOT MARKED ON
PART)
123
4
5
6
7
8
858-010 El Ochito® Socket Contact for ARINC 600 Connectors with Quadraxial Inserts
Ø .276/.271
(7.01/6.88)
CABLE (REF) .90
(22.9)
MAX .033/.029
(0.84/0.74)
.600/.590
(15.24/15.00)
SHIELD CRIMP
858-010-01F: .231 (5.87) HEX
858-010-02F: .265 (6.73) ROUND
POLARIZATION
KEY
Ø .288/.284
(7.32/7.21) Ø .316/.313
(8.03/7.95)
PIN NO. DESIGNATION
(NOT MARKED ON
PART)
1
2
3
4567
8
.075/.073
(1.91/1.85)
858-004 and 858-017 El Ochito® Socket Contact for 233-217 SuperNine® and Series 80 Mighty Mouse
.770
(19.56)
MAX .033/.029
(0.84/0.74)
.631/.625
(16.02/15.88)
POLARIZATION
KEY
Ø .288/.284
(7.32/7.21) Ø .316/.313
(8.03/7.95)
Ø .276/.271
(7.01/6.88)
SHIELD CRIMP
858-004: .231 (5.87) HEX
858-017: .265 (6.73) ROUND
CABLE (REF) .060 (1.52)
PIN NO. DESIGNATION
(NOT MARKED ON
PART)
1
2
3
4567
8
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Wiring Guidelines
El Ochito® Octaxial Contacts for 10G Ethernet
Implementation Guidelines for Terminating El Ochito® Contacts to 4-Pair Wire
ARINC 664 Wiring Congurations
Pin Socket Pin Pin Socket
Socket
PIN
CABLE END A SOCKET
CABLE END B
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
PIN
CABLE END A
PIN
CABLE END B
6
5
8
7
2
1
4
3
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
SOCKET
CABLE END A SOCKET
CABLE END B
8
7
6
5
4
3
2
1
6
5
8
7
2
1
4
3
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
Figure 3
Schematic for Pin – Socket Wiring
Figure 4
Schematic for Pin – Pin Wiring
Figure 5
Schematic for Socket – Socket Wiring
BRN
ORN
GRN
BLU
W/BR
W/BL W/OR
W/GR BRN
ORN
GRN
BLU
W/BR
W/BL
W/OR
W/GR
4-Pair Aircraft-Grade
Ethernet Cable
4-Pair Aircraft-Grade
Ethernet Cable
End “A”
Wire pair clockwise rotation is:
(WHT/BLU+BLU)(WHT/ORN+ORN)
(WHT/GRN+GRN) (WHT/BRN+BRN)
Pin with END A
Color Assignments
Pin with END B
Color Assignments
Socket with END A
Color Assignments
Socket with END B
Color Assignments
End “A” End “B”
End “B”
Wire pair clockwise rotation is:
(WHT/BLU+BLU)(WHT/BRN+BRN)
(WHT/GRN+GRN) (WHT/ORN+ORN)
ARINC Specification 664 Part 2- Appendix
N provides guidelines for implementing
1000BASE-T and 10GBASE-T Ethernet links
utilizing El Ochito® contacts. These guidelines
provide instructions on maintaining the
geometric relationship between the El
Ochito® contact and the wire. The wire has
an “A” end and a “B” end as shown in Figure 1.
A contact installed on end “A” has a dierent
wiring schematic than a contact installed on
end “B”. This is done to prevent the four wire
pairs to be crossed contrary to their natural
twist or lay. System designers and integrators
should refer to ARINC 664 Part 2 for full
guidance on specifying the connectors used
throughout the data link.
The ARINC specification allows only four
possible contact number-to-wire color
combinations. Figure 2 shows these four
combinations. The wire designer must specify
which wire end (A or B) to terminate to each
connector. Following the pin number- wire
colors in Figure 2 will ensure cable assemblies
are assembled with the correct wire rotation.
Figure 1 — Wire Rotation
Figure 2 — Contact Color Assignment
123
4
5
6
7
8
1
2
3
456
7
8
1
2
3
456
7
8123
4
5
6
7
8
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Signal Integrity Data
-30.0
-25.0
-20.0
-15.0
-10.0
-5.0
0.0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Return Loss (dB)
Return Loss
Two Mated Pair of Ochito Contacts with 20" of Cable
Frequency (GHz)
El Ochito® Octaxial Contacts for 10G Ethernet
-20.0
-25.0
-15.0
-10.0
-5.0
0.0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Insertion Loss (dB)
Ochito Contact Insertion Loss
Single Mated Pair
Frequency (GHz)
-30.0
-40.0
-50.0
-70.0
-60.0
-20.0
-10.0
0.0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0
Attenuation (dB)
NEXT
Two Mated Pair of Ochito Contacts with 20" of Cable
Frequency (GHz)
-30.0
-40.0
-50.0
-70.0
-60.0
-20.0
-10.0
0.0
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
10.0
Attenuation (dB)
FEXT
Two Mated Pair of Ochito Contacts with 20" of Cable
Frequency (GHz)
Excellent signal integrity at Gigabit speeds with S/UTP Cable
El Ochito® contacts with internal metal spline reduce crosstalk and attenuation for superior electrical bandwidth up to 9 Gbps. At -3dB insertion
loss for a single mated pair at 4.1 GHz, the El Ochito® contact oers performance exceeding the requirements for 10 GbE interconnects.
These graphs illustrate data shown in Glenair Test Report GT-15-
40 “High Speed Characterization Report: El Ochito® Size 8 Multi-
Pair Contact for Dierential Applications”. All measurements were
taken using an Agilent E5071C network analyzer with TDR option
connected to a SMA launch board designed specifically for this
testing. Test cables were fabricated using 100 ohm Glenair twisted
pair S/UTP Ethernet cable 963-003-26 terminated to El Ochito® pin
contact 858-003. The mating PC tail socket 858-008 was assembled
onto the PCB launch xture shown below.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Signal Integrity Data
El Ochito® Octaxial Contacts for 10G Ethernet
10GBase-T Cat 6a Compliance Testing
Testing was performed to assure compliance
with TIA/EIA 568B Cat 6a requirements. Four
cordset segments were connected in series
for a combined length of 70m, with a total
of five mated pairs of El Ochito® contacts.
REF: Glenair Test Report GT-15-121.
Cable ID: 591A_591B_788A_788B Test Summary: PASS
Date / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000
Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352
Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289
Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004
Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207
Prop. Delay (ns), Limit 555 [Pair 12] 310
Delay Skew (ns), Limit 50 [Pair 12] 2
Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4
Frequency (MHz) [Pair 45] 500.0
Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case Value
PASS MAIN SR MAIN SR
Worst Pair 36-45 12-36 45-78 45-78
NEXT (dB) 1.9 2.6 9.3 7.6
Freq. (MHz) 4.9 23.9 494.0 498.0
Limit (dB) 61.7 50.4 26.2 26.1
Worst Pair 45 36 45 45
PS NEXT (dB) 2.6 2.7 8.3 8.2
Freq. (MHz) 5.0 23.6 494.0 498.0
Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SR
Worst Pair 12-78 78-12 36-45 36-45
ACR-F (dB) 2.3 2.3 7.1 5.8
Freq. (MHz) 1.0 1.0 466.0 473.0
Limit (dB) 63.3 63.3 9.9 9.8
Worst Pair 12 12 45 45
PS ACR-F (dB) 3.6 3.5 8.9 7.8
Freq. (MHz) 1.0 1.0 466.0 476.0
Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SR
Worst Pair 36-45 12-36 12-45 45-78
ACR-N (dB) 2.0 3.4 16.0 16.3
Freq. (MHz) 4.9 23.6 495.0 498.0
Limit (dB) 57.1 40.5 -22.8 -23.1
Worst Pair 45 36 45 45
PS ACR-N (dB) 2.6 3.2 15.3 14.7
Freq. (MHz) 4.9 8.0 500.0 498.0
Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SR
Worst Pair 78 12 45 78
RL (dB) 0.6* 1.0* 11.5 11.0
Freq. (MHz) 2.3 2.4 387.0 434.0
Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:
10BASE-T 100BASE-TX 100BASE-T4
1000BASE-T 10GBASE-T ATM-25
ATM-51 ATM-155 100VG-AnyLan
TR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)
PASS Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASS
Date / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000
Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352
Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289
Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004
Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207
Prop. Delay (ns), Limit 555 [Pair 12] 310
Delay Skew (ns), Limit 50 [Pair 12] 2
Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4
Frequency (MHz) [Pair 45] 500.0
Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case Value
PASS MAIN SR MAIN SR
Worst Pair 36-45 12-36 45-78 45-78
NEXT (dB) 1.9 2.6 9.3 7.6
Freq. (MHz) 4.9 23.9 494.0 498.0
Limit (dB) 61.7 50.4 26.2 26.1
Worst Pair 45 36 45 45
PS NEXT (dB) 2.6 2.7 8.3 8.2
Freq. (MHz) 5.0 23.6 494.0 498.0
Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SR
Worst Pair 12-78 78-12 36-45 36-45
ACR-F (dB) 2.3 2.3 7.1 5.8
Freq. (MHz) 1.0 1.0 466.0 473.0
Limit (dB) 63.3 63.3 9.9 9.8
Worst Pair 12 12 45 45
PS ACR-F (dB) 3.6 3.5 8.9 7.8
Freq. (MHz) 1.0 1.0 466.0 476.0
Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SR
Worst Pair 36-45 12-36 12-45 45-78
ACR-N (dB) 2.0 3.4 16.0 16.3
Freq. (MHz) 4.9 23.6 495.0 498.0
Limit (dB) 57.1 40.5 -22.8 -23.1
Worst Pair 45 36 45 45
PS ACR-N (dB) 2.6 3.2 15.3 14.7
Freq. (MHz) 4.9 8.0 500.0 498.0
Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SR
Worst Pair 78 12 45 78
RL (dB) 0.6* 1.0* 11.5 11.0
Freq. (MHz) 2.3 2.4 387.0 434.0
Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:
10BASE-T 100BASE-TX 100BASE-T4
1000BASE-T 10GBASE-T ATM-25
ATM-51 ATM-155 100VG-AnyLan
TR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)
PASS Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASS
Date / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000
Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352
Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289
Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004
Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207
Prop. Delay (ns), Limit 555 [Pair 12] 310
Delay Skew (ns), Limit 50 [Pair 12] 2
Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4
Frequency (MHz) [Pair 45] 500.0
Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case Value
PASS MAIN SR MAIN SR
Worst Pair 36-45 12-36 45-78 45-78
NEXT (dB) 1.9 2.6 9.3 7.6
Freq. (MHz) 4.9 23.9 494.0 498.0
Limit (dB) 61.7 50.4 26.2 26.1
Worst Pair 45 36 45 45
PS NEXT (dB) 2.6 2.7 8.3 8.2
Freq. (MHz) 5.0 23.6 494.0 498.0
Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SR
Worst Pair 12-78 78-12 36-45 36-45
ACR-F (dB) 2.3 2.3 7.1 5.8
Freq. (MHz) 1.0 1.0 466.0 473.0
Limit (dB) 63.3 63.3 9.9 9.8
Worst Pair 12 12 45 45
PS ACR-F (dB) 3.6 3.5 8.9 7.8
Freq. (MHz) 1.0 1.0 466.0 476.0
Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SR
Worst Pair 36-45 12-36 12-45 45-78
ACR-N (dB) 2.0 3.4 16.0 16.3
Freq. (MHz) 4.9 23.6 495.0 498.0
Limit (dB) 57.1 40.5 -22.8 -23.1
Worst Pair 45 36 45 45
PS ACR-N (dB) 2.6 3.2 15.3 14.7
Freq. (MHz) 4.9 8.0 500.0 498.0
Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SR
Worst Pair 78 12 45 78
RL (dB) 0.6* 1.0* 11.5 11.0
Freq. (MHz) 2.3 2.4 387.0 434.0
Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:
10BASE-T 100BASE-TX 100BASE-T4
1000BASE-T 10GBASE-T ATM-25
ATM-51 ATM-155 100VG-AnyLan
TR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)
PASS
Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASS
Date / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000
Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352
Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289
Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004
Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207
Prop. Delay (ns), Limit 555 [Pair 12] 310
Delay Skew (ns), Limit 50 [Pair 12] 2
Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4
Frequency (MHz) [Pair 45] 500.0
Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case Value
PASS MAIN SR MAIN SR
Worst Pair 36-45 12-36 45-78 45-78
NEXT (dB) 1.9 2.6 9.3 7.6
Freq. (MHz) 4.9 23.9 494.0 498.0
Limit (dB) 61.7 50.4 26.2 26.1
Worst Pair 45 36 45 45
PS NEXT (dB) 2.6 2.7 8.3 8.2
Freq. (MHz) 5.0 23.6 494.0 498.0
Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SR
Worst Pair 12-78 78-12 36-45 36-45
ACR-F (dB) 2.3 2.3 7.1 5.8
Freq. (MHz) 1.0 1.0 466.0 473.0
Limit (dB) 63.3 63.3 9.9 9.8
Worst Pair 12 12 45 45
PS ACR-F (dB) 3.6 3.5 8.9 7.8
Freq. (MHz) 1.0 1.0 466.0 476.0
Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SR
Worst Pair 36-45 12-36 12-45 45-78
ACR-N (dB) 2.0 3.4 16.0 16.3
Freq. (MHz) 4.9 23.6 495.0 498.0
Limit (dB) 57.1 40.5 -22.8 -23.1
Worst Pair 45 36 45 45
PS ACR-N (dB) 2.6 3.2 15.3 14.7
Freq. (MHz) 4.9 8.0 500.0 498.0
Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SR
Worst Pair 78 12 45 78
RL (dB) 0.6* 1.0* 11.5 11.0
Freq. (MHz) 2.3 2.4 387.0 434.0
Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:
10BASE-T 100BASE-TX 100BASE-T4
1000BASE-T 10GBASE-T ATM-25
ATM-51 ATM-155 100VG-AnyLan
TR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)
PASS Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
Cable ID: 591A_591B_788A_788B Test Summary: PASS
Date / Time: 08/20/2015 11:44:01 AM Operator: KLW Model: DSX-5000
Headroom 1.9 dB (NEXT 36-45) Software Version: V3.0 Build 6 Main S/N: 2766352
Test Limit: TIA Cat 6A Channel Limits Version: V3.0 Remote S/N: 2766289
Cable Type: Cat 6A U/UTP NVP: 68.2% Main Adapter: DSX-CHA004
Calibration Date: 08/14/2014 Remote Adapter: DSX-CHA004
Project: DEFAULT Ochito Cat 6A Tests.flw
LinkWare™ PC Version 9.3
Length (ft), Limit 328 [Pair 36] 207
Prop. Delay (ns), Limit 555 [Pair 12] 310
Delay Skew (ns), Limit 50 [Pair 12] 2
Resistance (ohms) [Pair 78] 19.1
Insertion Loss Margin (dB) [Pair 45] 6.4
Frequency (MHz) [Pair 45] 500.0
Limit (dB) [Pair 45] 49.3
Worst Case Margin Worst Case Value
PASS MAIN SR MAIN SR
Worst Pair 36-45 12-36 45-78 45-78
NEXT (dB) 1.9 2.6 9.3 7.6
Freq. (MHz) 4.9 23.9 494.0 498.0
Limit (dB) 61.7 50.4 26.2 26.1
Worst Pair 45 36 45 45
PS NEXT (dB) 2.6 2.7 8.3 8.2
Freq. (MHz) 5.0 23.6 494.0 498.0
Limit (dB) 59.0 47.8 23.4 23.3
PASS MAIN SR MAIN SR
Worst Pair 12-78 78-12 36-45 36-45
ACR-F (dB) 2.3 2.3 7.1 5.8
Freq. (MHz) 1.0 1.0 466.0 473.0
Limit (dB) 63.3 63.3 9.9 9.8
Worst Pair 12 12 45 45
PS ACR-F (dB) 3.6 3.5 8.9 7.8
Freq. (MHz) 1.0 1.0 466.0 476.0
Limit (dB) 60.3 60.3 6.9 6.7
N/A MAIN SR MAIN SR
Worst Pair 36-45 12-36 12-45 45-78
ACR-N (dB) 2.0 3.4 16.0 16.3
Freq. (MHz) 4.9 23.6 495.0 498.0
Limit (dB) 57.1 40.5 -22.8 -23.1
Worst Pair 45 36 45 45
PS ACR-N (dB) 2.6 3.2 15.3 14.7
Freq. (MHz) 4.9 8.0 500.0 498.0
Limit (dB) 54.6 49.8 -26.1 -25.9
PASS MAIN SR MAIN SR
Worst Pair 78 12 45 78
RL (dB) 0.6* 1.0* 11.5 11.0
Freq. (MHz) 2.3 2.4 387.0 434.0
Limit (dB) 19.0 19.0 6.1 6.0
Compliant Network Standards:
10BASE-T 100BASE-TX 100BASE-T4
1000BASE-T 10GBASE-T ATM-25
ATM-51 ATM-155 100VG-AnyLan
TR-4 TR-16 Active TR-16 Passive
207 ft
Wire Map (T568A)
PASS Insertion Loss (dB)
MHz
0
10
20
30
40
50
60
0 250 500
NEXT (dB)
MHz
0
20
40
60
80
100
0 250 500
NEXT @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-F @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
ACR-N (dB)
MHz
-40
0
40
80
0 250 500
ACR-N @ Remote (dB)
MHz
-40
0
40
80
0 250 500
RL (dB)
MHz
0
20
40
60
80
100
0 250 500
RL @ Remote (dB)
MHz
0
20
40
60
80
100
0 250 500
* Measurement is within the accuracy limits of the instrument.
FLUKE DSX-5000
MAIN
FLUKE DSX-5000
REMOTE
PIN CONTACT
858-016
SOCKET CONTACT
858-017
CAT 6a CABLE
963-033-26
RJ-45 PLUG RJ-45 PLUG
1.5m ADAPTER
CABLE
SEGMENT 1
15m SEGMENT 2
15m SEGMENT 3
20m SEGMENT 4
20m
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Aerospace Grade Category 6a Ethernet Cable
El Ochito® Octaxial Contacts for 10G Ethernet
963-003-26 S/UTP Cable 963-033-26 S/FTP Cable
S/UTP 26 AWG cable is small, lightweight and flexible. Twisted
pairs are separated by a uoropolymer spline for reduced crosstalk
and attenuation. This 200°C rated cable is Skydrol resistant,
RoHS compliant and meets FAA FAR Parts 23 and 25 Appendix F
flammability requirements. Rugged, laser-markable PTFE jacket
withstands abrasion and chemicals. Meets ANSI/TIA-568B Category
6a performance up to 193 feet.
S/FTP 26 AWG cable has an individual foil shield around each data pair
for reduced crosstalk and attenuation. This high data rate Ethernet
cable features a unique cable jacket material and high-density
construction that signicantly reduces weight and diameter. Meets
ANSI/TIA 568-C.2 Category 6a requirements up to 65 meters (213
feet).
S/UTP Cable
Glenair Part No. --
Manufacturer Part No. EA
Manufacturer PIC
Construction Details
CONDUCTOR
26 AWG 19X38 SILVER PLATED
HIGH STRENGTH COPPER ALLOY
FOUR TWISTED PAIRS
PFA WIRE INSULATION
FLUOROPOLYMER TAPE
SPLINE
FLUOROPOLYMER
SILVER-PLATED COPPER BRAID
80% MIN. COVERAGE
JACKET
PTFE WHITE LASER-MARKABLE
0.22 (5.59)
Color Code
Pair # Blue, White/Blue Pair # Orange, White/Orange Pair # Green,
White/Green Pair # Brown, White/Brown
Specications
Impedance (ohms)
Temperature Rating - to + °C
Weight (lbs/ ft.) .
Capacitance (pF/ft) .
Minimum Bend Radius (inches) .
Velocity of Propagation %
Dielectric Voltage Rating (kV rms) .
DC Resistance, Max (ohms/ ft.) .
Max Distance in Feet (m) ()
Attenuation Nom / Max
Frequency dB/ ft.
MHz . / .
MHz . / .
MHz . / .
MHz . / .
S/FTP Cable
Glenair Part No. --
Manufacturer Part No. RCN-
Manufacturer Gore
Construction Details
CONDUCTOR
26 AWG 19X38 SILVER PLATED
HIGH STRENGTH COPPER ALLOY
WIRE INSULATION
ePTFE / PTFE .050 (1.27)
OVERALL SHIELD
AWG 40 SILVER-PLATED COPPER
92% MIN COVERAGE
PAIR SHIELD
ALUMINIZED POLYAMIDE
(ALUMINUM OUT)
FILLER
ePTFE
JACKET
ENGINEERED FLUOROPOLYMER EF100
WHITE LASER-MARKABLE 0.004 (0.10) WALL
0.220 (5.59) MAX DIAMETER
Color Code
Pair # Blue, White/Blue Pair # Orange, White/Orange Pair # Green,
White/Green Pair # Brown, White/Brown
Specications
Impedance (ohms) (+ -)
Temperature Rating - to + °C
Weight (lbs/ ft.) .
Capacitance (pF/ft) .
Time Delay . ns/ft
Maximum Attenuation at m
Length
Frequency dB
MHz .
MHz .
MHz .
MHz .
NEXT (maximum)
Frequency dB
MHz .
MHz .
MHz .
MHz .
MHz .
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pre-Wired El Ochito® Contacts
El Ochito® Octaxial Contacts for 10G Ethernet
Pre-wired El Ochito® assemblies are 100% tested and ready for use. Compatible with Glenair
233-217 SuperNine or Series 80 Mighty Mouse connectors with keyed size #8 cavities, these
assemblies are available with three termination options: single-ended, El Ochito® contacts
on both ends, or with an RJ45 plug on one end. Two ight-grade cables are available:S/UTP
(PIC) or S/FTP (Gore). Contacts are wired per the guidelines of ARINC 664 Part 2 Appendix N.
How To Order Pre-Wired El Ochito® Contacts
858-022 B -A C -01 -36
Product 858-022 = Pre-wired El Ochito®
contact
Connector Type
A = ARINC 600
B = M38999 type (233-217 or Series
80 Mighty Mouse
End A Contact
Type
A = El Ochito® pin contact
B = El Ochito® socket contact
End B Contact/
Connector
A = El Ochito® pin contact
B = El Ochito® socket contact
C = RJ45 Cat6a shielded plug
N = End B not terminated
Cable Type 01 = S/UTP cable, #26 AWG, P/N 963-003-26 (PIC)
02 = S/FTP cable, #26 AWG, P/N 963-033-26 (Gore)
Length Overall length in inches
END A OPTIONS
END B OPTIONS
Pin Contact
Option A
Socket Contact
Option B
Pin Contact
Option A
Socket Contact
Option B
RJ45 Plug
Option C
Not Terminated
Option N
END A OPTIONS
END B OPTIONS
Pin Contact
Option A
Socket Contact
Option B
Pin Contact
Option A
Socket Contact
Option B
RJ45 Plug
Option C
Not Terminated
Option N
Technical Data
Specifications
QOperating temperature: -65C. to
+175C. (El Ochito) or -40C. to +85C
(RJ45)
QMeets EIA/TIA 568B.2-10 and IEC 60603-
7-51 CAT6a 500 MHz
QCharacteristic Impedance: 100 ohms
QInsulation resistance: 200 megohms min.
QDurability: 500 mating cycles
El Ochito® Construction
QInner contacts, outer contact,
shield crimp ferrule: copper alloy, 50
microinches gold over nickel plating
QFront, middle and rear insulator: PPS
QSpline: copper alloy, nickel plated
QSealing boot grommet: fluorosilicone
QSealing boot body: rigid thermoplastic,
PEI or equivalent
Connector Compatibility
QGlenair Series 80 Mighty Mouse
QGlenair 233-217 SuperNine™
RJ45 Construction
QBody: UL 94-V0 polycarbonate
QGrommet: UL 94-V0 polycarbonate
QContacts: copper alloy, 50 microinches
selective gold plating
QShield: nickel-plated copper alloy
Notes
1. 100% tested for continuity, DWV and IR.
2. Wired per the guidelines of ARINC 664
Part 2 Appendix N.
Contact Positions
12
3
4
5
6
7
8
1
2
3
4
56
7
8
Mating face of Pin
Contacts
Mating face of Socket
Contacts
OVERALL LENGTH
TOLERANCE
UP TO 60 INCHES +1.80/-0.00 (0.0)
OVER 60 INCHES +3% / -0%
END A END B
Ref. El Ochito® Contact Part Numbers
Connector
Type Connector Description Cable
Type Pin Contact Socket Contact
A ARINC 600 01 -- --
02 -- --
BSeries 23 SuperNine®
Series 80 Mighty Mouse
01 -- --
02 -- --
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Pre-Wired El Ochito® Contacts
El Ochito® Octaxial Contacts for 10G Ethernet
Single-Ended El Ochito® Pin or Socket
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OCHITO PIN OR SOCKET
El Ochito® Pin End A to El Ochito® Socket
PIN CONTACT END A,
SOCKET CONTACT END B
END A OPTION A, END B OPTION B
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
PIN SOCKET
END
A
END
B
El Ochito® Socket End A to El Ochito® Pin
SOCKET CONTACT END A,
PIN CONTACT END B
END A OPTION B, END B OPTION A
6
5
8
7
2
1
4
3
6
5
8
7
2
1
4
3
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
SOCKET PIN
END
AEND
B
El Ochito® Pin or Socket to RJ-45
OCHITO TO RJ-45
8
7
5
4
6
3
2
1
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OCHITO PIN OR
SOCKET RJ-45
El Ochito® Pin to El Ochito® Pin
PIN CONTACTS ON BOTH ENDS
END A OPTION A END B OPTION A
6
5
8
7
2
1
4
3
8
7
6
5
4
3
2
1
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OCHITO PIN
END
AEND
B
El Ochito® Socket to El Ochito® Socket
SOCKET CONTACT BOTH ENDS
END A OPTION B END B OPTION B
8
7
6
5
4
3
2
1
6
5
8
7
2
1
4
3
BRN
WHT/BRN
BLUE
WHT/BLU
ORN
WHT/ORN
GRN
WHT/GRN
OCHITO SOCKET
END
AEND
B
Contacts are wired per the guidelines
of ARINC 664 Part 2 Appendix N. These
guidelines control the wire color
assignments. The wire terminations depend
on the contact gender and whether the
contact is terminated to end “A” or end “B”
of the wire.
The diagram at right shows the ARINC 664
Part 2 color assignments for each end of the
wire. Following these guidelines ensure the
wire geometry is maintained throughout the
data link.
858-022 Pre-Wired El Ochito® Contact Schematics
Pin with END A
Color Assignments
Pin with END B
Color Assignments
Socket with END A
Color Assignments
Socket with END B
Color Assignments
123
4
5
6
7
8
1
2
3
456
7
8
1
2
3
456
7
8123
4
5
6
7
8
End “A”
End “B”
BRN
ORN
GRN
BLU
W/BR
W/BL W/OR
W/GR BRN
ORN
GRN
BLU
W/BR
W/BL
W/OR
W/GR
ARINC 664 Part 2 Appendix N Color Assignments
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Dimensions in Inches (millimeters) are subject to change without notice.
Prevent damage to expensive cables with El Ochito® test adapters
and jumper cables. These test adapters properly align mating test
contacts without the added expense and time-consuming labor
of mating connectors. Jumper cables are ordered separately. Push
test adapter into Device Under Test (DUT), then insert adapter cable
into adapter. No tool is required to insert and remove adapter cable.
Jumper cables have high performance shielded EIA/TIA 568B.2-10
Cat6a RJ45 plug for interface with test instruments.
El Ochito® Test Adapters and Cables for SuperNine® Connectors
El Ochito® Octaxial Contacts for 10G Ethernet
Ordering Information for El Ochito® Test Adapters (Jumper Cables not Included)
Arr.
Device Under Test
Plug with Pin
Contacts(1) Plug with Socket
Contacts(1) Receptacle with
Pin Contacts Receptacle with
Socket Contacts
09G05 -SGN -PGN -SG -PG
11-01 -S-N -P-N -S- -P-
17-02 -S-N -P-N -S- -P-
17-22 -S-N -P-N -S- -P-
17-60 -S-N -P-N -S- -P-
17-75 -S-N -P-N -S- -P-
19-04 -S-N -P-N -S- -P-
19-12 -S-N -P-N -S- -P-
19-17 -S-N -P-N -S- -P-
19-18 -S-N -P-N -S- -P-
21-75 -S-N -P-N -S- -P-
23-05 -S-N -P-N -S- -P-
23-06 -S-N -P-N -S- -P-
25-07 -S-N -P-N -S- -P-
25-08 -S-N -P-N -S- -P-
25-17 -S-N -P-N -S- -P-
25-20 -S-N -P-N -S- -P-
25-26 -S-N -P-N -S- -P-
25-41 -S-N -P-N -S- -P-
25-46 -S-N -P-N -S- -P-
(1) For alternate polarizations, change sufx code from N to A, B, C, D or E.
859-118S
MATES WITH PLUG WITH PIN CONTACTS
859-132P
MATES WITH PLUG WITH SOCKET CONTACTS
RECEPTACLE ADAPTER
MATES WITH PLUG CONNECTOR
859-117P
MATES WITH RECEPTACLE WITH SOCKET CONTACTS
859-133S
MATES WITH RECEPTACLE WITH PIN CONTACTS
PLUG ADAPTER
MATES WITH RECEPTACLE CONNECTOR
PLUG
RECEPTACLE
DEVICE UNDER TEST
859-118S SOCKET
859-132P PIN
859-117P PIN
859-133S SOCKET
TEST ADAPTER
OCHITO JUMPER CABLE
SOCKET CONTACT TO RJ45
858-020B
ADAPTER CABLES
OCHITO JUMPER CABLE
PIN CONTACT TO RJ45
858-020A
Construction
QReceptacle adapter (859-117P and
857-133S): polyetherimide resin,
natural color
QPlug adapter (859-118S and 859-
132P): polyetherimide insert, blue
anodized aluminum alloy housing
Connector Compatibility
QGlenair 233-217 SuperNine™ connectors
with size 8 El Ochito® contacts
Plug Adapter Receptacle Adapter
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse and
Micro-Crimp® Connectors
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts • Rev. ..
Dimensions in Inches (millimeters) are subject to change without notice.
El Ochito® Test Adapters and Cables for SuperNine® Connectors
El Ochito® Octaxial Contacts for 10G Ethernet
Overall Length Part Number
Inches meters
18 0.45 858-020-A-02-18
36 0.91 858-020-A-02-36
72 1.82 858-020-A-02-72
120 3.05 858-020-A-02-120
859-117P Pin Adapter
Shell
Size A Diameter
1.200 (30.5) MAX
Ø A
H
B
C
D
F
E
G
A
A
G
F
ED
C
B
H
A
G
F
ED
C
B
H
In. mm.
09 (A) .650 16.5
11 (B) .780 19.8
17 (E) 1.203 30.6
19 (F) 1.265 32.1
21 (G) 1.390 35.3
23 (H) 1.520 38.6
25 (J) 1.635 41.5
859-132P Pin Adapter
Shell
Size A Diameter
1.200 (30.5) MAX
Ø A
A
G
F
ED
C
B
H
In. mm.
09 (A) .710 18.0
11 (B) .850 21.6
17 (E) 1.271 32.3
19 (F) 1.333 33.9
21 (G) 1.460 37.1
23 (H) 1.585 40.3
25 (J) 1.711 43.5
859-118S Socket Adapter
Shell
Size A Diameter
1.200 (30.5) MAX Ø A
H
B
D
F
E
G
A
In. mm.
09 (A) .710 18.0
11 (B) .850 21.6
17 (E) 1.271 32.3
19 (F) 1.333 33.9
21 (G) 1.460 37.1
23 (H) 1.585 40.3
25 (J) 1.711 43.5
859-133S Socket Adapter
Shell
Size A Diameter
1.200 (30.5) MAX
Ø A
H
B
C
D
F
E
G
A
A
H
G
F
E
D
C
B
In. mm.
09 (A) .650 16.5
11 (B) .780 19.8
17 (E) 1.203 30.6
19 (F) 1.265 32.1
21 (G) 1.390 35.3
23 (H) 1.520 38.6
25 (J) 1.635 41.5
Overall Length Part Number
Inches meters
18 0.45 858-020-B-02-18
36 0.91 858-020-B-02-36
72 1.82 858-020-B-02-72
120 3.05 858-020-B-02-120
El Ochito® Test Jumpers with Pin Contacts
OCHITO PIN
CONTACT
(858-018)
ETHERNET CABLE
S/FTP CAT6A, 26 AWG
(963-033-26)
RJ45 MODULAR PLUG
SHIELDED HIGH PERFORMANCE
EIA/TIA 568B.2-10 AND IEC 60603-7-51
CAT6a 10 GIGABIT SPEED
Pin Jumper Ordering Information
El Ochito® Test Jumper Schematic Notes
1. 858-020 jumper cables are intended only for use in Glenair El
Ochito® test adapters. Do not attempt to install in MIL-DTL-38999
type connectors.
2. Other cable lengths are readily available. Change the sux number
to the desired length in inches.
3. 858-020 jumper cables are fully assembled and 100% electrically
tested.
4. Length is minimum overall length including contact and plug.
5. No tool is required to install or remove contacts.
6. Jumper cables are wired per the guidelines of ARINC 664 Part 2
Appendix N.
El Ochito® Test Jumpers with Socket Contacts
OCHITO SOCKET
CONTACT
(858-019)
RJ45 MODULAR PLUG
SHIELDED HIGH PERFORMANCE
EIA/TIA 568B.2-10 AND IEC 60603-7-51
CAT6a 10 GIGABIT SPEED
ETHERNET CABLE
S/FTP CAT6A, 26 AWG
(963-033-26)
Socket Jumper Ordering Information
MATING FACE OF SOCKET
CONTACT
1
2
3
4
56
7
8
1
6
7
8
2
3
4
5
MATING FACE OF PIN
CONTACT
NOTE: PINOUT ASSIGNMENT IAW ARINC 664
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
24/26 AWG
WHT/BRN
BRN
WHT/ORN
ORN
BLU
WHT/BLU24/26 AWG
P1 P2
8
7
6
3
2
1
4
5
8
7
6
5
4
3
2
1
WHT/GRN
GRN
WIRING DIAGRAM
© Glenair, Inc • Air Way, Glendale, CA • -- • www.glenair.com • U.S. CAGE code • High-Speed Contacts Rev. ..
Part Number Page No.
852-001 ..................................................................................................7
852-002 ..................................................................................................7
852-003 ..................................................................................................7
852-004 ..................................................................................................7
852-005 ..................................................................................................7
852-006 ..................................................................................................6
852-007 ..................................................................................................6
852-008 ..................................................................................................8
852-009 ..................................................................................................8
852-010 ..................................................................................................8
852-015 ............................................................................................... 12
852-016 ............................................................................................... 12
852-017 ............................................................................................... 12
852-018 ............................................................................................... 12
852-019 ............................................................................................... 12
852-024 ............................................................................................... 24
852-025 ............................................................................................... 24
852-030 ............................................................................................... 10
852-031 ............................................................................................... 10
852-032 ............................................................................................... 24
852-037 ............................................................................................... 12
852-042 ............................................................................................... 10
852-043 ............................................................................................... 10
852-056 ............................................................................................... 14
852-057 ............................................................................................... 14
852-070 ............................................................................................... 22
852-071 ............................................................................................... 22
852-082 ............................................................................................... 14
852-083 ............................................................................................... 14
852-103 ............................................................................................... 16
852-104 ............................................................................................... 16
852-106 ............................................................................................... 16
853-003 .............................................................................................. 26
853-004 ............................................................................................... 26
853-008 ............................................................................................... 30
853-009 ............................................................................................... 30
853-011 ............................................................................................... 28
853-012 ............................................................................................... 28
853-013 ............................................................................................... 32
853-014 .............................................................................................. 32
853-015 ............................................................................................... 35
853-016 ............................................................................................... 35
853-024 ............................................................................................... 32
853-025 ............................................................................................... 32
854-001 ............................................................................................... 37
854-002 ............................................................................................... 37
854-014 ............................................................................................... 36
854-015 ............................................................................................... 36
858-003 .............................................................................................. 40
858-004 ............................................................................................... 40
858-009 .............................................................................................. 40
858-010 ............................................................................................... 40
858-016 ............................................................................................... 40
858-017 ............................................................................................... 40
858-020 ............................................................................................... 50
858-022 ............................................................................................... 47
859-117 ............................................................................................... 49
859-118 ............................................................................................... 49
859-132 ............................................................................................... 49
859-133 ............................................................................................... 49
960-130 ............................................................................................... 18
960-131 ............................................................................................... 18
960-132 ............................................................................................... 18
962-001 ............................................................................................... 25
963-003 ............................................................................................... 46
963-019 ............................................................................................... 39
963-020 ............................................................................................... 39
963-021 ............................................................................................... 39
963-022 ............................................................................................... 39
963-023 ............................................................................................... 39
963-024 ............................................................................................... 39
963-033 ............................................................................................... 46
M39029/27-210 ..................................................................................7
M39029/27-402 ..................................................................................7
M39029/28-211 ..................................................................................7
M39029/28-409 ..................................................................................7
M39029/59-366 ..................................................................................6
M39029/60-367 ..................................................................................6
M39029/75-416 ..................................................................................7
M39029/75-417 ..................................................................................7
M39029/76-424 ..................................................................................8
M39029/76-425 ..................................................................................8
M39029/77-428 ..................................................................................8
M39029/77-429 ..................................................................................8
M39029/78-432 ..................................................................................8
M39029/78-433 ..................................................................................8
M39029/102-558 ................................................................................7
M39029/103-559 ................................................................................7
M39029/113-625 ............................................................................. 26
M39029/114-628 ............................................................................. 26
Part Number Index
Part Number Index
Part Number Page No.
RF, Microwave and Datalink Contacts
for MIL-DTL-38999, SuperNine®, Mighty Mouse, and
Micro-Crimp Connectors
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
Glenair High-Speed
Interconnect Solutions
A complete range of electrical, ber optic,
and opto-electronic interconnect solutions for
harsh environment Ethernet, RF, microwave,
and other high-speed matched-impedance
military and aerospace applications
TECHNOLOGY OVERVIEW
El Ochito®: The 10G Ethernet
contact with patented data pair
isolation technology
Octobyte™ 4/8 pole
modular contact
system for industrial
applications
Series 80 Mighty Mouse
High-Speed with matched-
impedance Teon® inserts
EL OCHITO® OCTAXIAL MATCHED-IMPEDANCE 10G ETHERNET CONTACT
®
Outer
Contact
Front Insulator
Contact Organizer Insulator
Pin Contacts (8)
Plastic Bushing
Crimp Ferrule
Outer Contact
Data Pair Isolator
Front Insulator
Contact Organizer
Insulator
Socket Contacts (8)
Plastic Bushing
Crimp Ferrule
Pin Contact Socket Contact
Data Pair Isolator
© 2016 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • High-Speed Contacts
TECHNOLOGY OVERVIEW
Glenair High-Speed
Interconnect Solutions
RF, MICROWAVE, AND DATALINK CONTACTS
HARSH-ENVIRONMENT OPTO-ELECTRONIC TECHNOLOGIES
SUPERSEAL FIELD RJ45 AND USB SOLUTIONS
HARSH-ENVIRONMENT FIBER OPTIC INTERCONNECT SYSTEMS
Small form-factor
transceiver
AS39029 Coaxial Spring-loaded
Microwave Coax
Series 80 Mighty Mouse
Micro-USB
SuperNine® RJ45 SuperNine® USB
Concentric
Twinax
Dierential
Ultra-Twinax
Quadrax High-Performance
Cable
Signal aggregation
media converter
7-port
Ethernet switch
DVI video
media converter
Photonic connectors
and modules
Size #8 Photonic
contacts
MIL-DTL-38999 Type Fiber Optic Glenair High Density (GHD) Series 80 Mighty Mouse Fiber Optic MIL-PRF-28876 QPL
MT Ferrule Fiber Optic
ARINC 801
Eye-Beam® GLT
Expanded-Beam Grin-Lens Termini
Eye-Beam® GMA
HMA-type Ball Lens
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • sales@glenair.com
www.glenair.com
Telephone:
+44-1623-638100
Facsimile:
+44-1623-638111
sales@glenair.co.uk
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Manseld
Notts, NG18 5BY England
Telephone:
06172 / 68 16 0
Facsimile:
06172 / 68 16 90
info@glenair.de
Glenair Electric GmbH
Schaberweg 28
61348 Bad Homburg
Germany
Telephone:
+33-5-34-40-97-40
Facsimile:
+33-5-61-47-86-10
sales@glenair.fr
Glenair France SARL
7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France
Telephone:
847-679-8833
Facsimile:
847-679-8849
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Telephone:
+46-8-50550000
sales@glenair.se
Glenair Nordic AB
Gustav III : S Boulevard 46
SE-169 27 Solna
Sweden
© 2016 Glenair, Inc. Printed in U.S.A.
CAT-152
Telephone:
+34-925-89-29-88
Facsimile:
+34-925-89-29-87
sales@glenair.es
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
Telephone:
203-741-1115
Facsimile:
203-741-0053
sales@glenair.com
Glenair Power
Products Group
860 N. Main Street Extension
Wallingford, CT
06492
Telephone:
+39-051-782811
Facsimile:
+39-051-782259
info@glenair.it
Telephone:
+82-31-8068-1090
Facsimile:
+82-31-8068-1092
sales@glenair.kr
Glenair Italia S.p.A.
Via Del Lavoro, 7
40057 Quarto Inferiore –
Granarolo dell’Emilia
Bologna, Italy
Glenair Korea
B-1304 Gunpo IT Valley
148 Gosan-Ro, Gunpo-Si
Kyunggi-Do, Korea
435-733
INTERCONNECT
SOLUTIONS
Out of This World
