1.6X0.8mm SMD CHIP LED LAMP Part Number: KP-1608ZGC-G Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6mmX0.8mm SMT LED, 1.1mm thickness. The Green source color devices are made with InGaN Light z Low power consumption. Emitting Diode. z Wide viewing angle. Static electricity and surge damage the LEDS. z Ideal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic z Various colors and lens types available. glove when handling the LEDs. z Package: 2000pcs / reel. All devices, equipment and machinery must be electrically z Moisture sensitivity level : level 3. grounded. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.1(0.004") unless otherwise noted. 3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ9088 REV NO: V.5B DATE: DEC/13/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 1 OF 5 ERP: 1203010085 Selection Guide Part No. Dice KP-1608ZGC-G Iv (mcd) [2] @ 20mA Lens Type Green (InGaN) Viewing Angle [1] Min. Typ. 21/2 400 750 120 Water Clear Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4 V IF=20mA IR Reverse Current Green 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40C To +85C Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ9088 REV NO: V.5B DATE: DEC/13/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 2 OF 5 ERP: 1203010085 Green KP-1608ZGC-G SPEC NO: DSAJ9088 REV NO: V.5B DATE: DEC/13/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 3 OF 5 ERP: 1203010085 KP-1608ZGC-G Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ9088 REV NO: V.5B DATE: DEC/13/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 4 OF 5 ERP: 1203010085 PACKING & LABEL SPECIFICATIONS KP-1608ZGC-G SPEC NO: DSAJ9088 REV NO: V.5B DATE: DEC/13/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su PAGE: 5 OF 5 ERP: 1203010085