V A C U U M S C H M E L Z E
DATENBLATT
/ Specification
Sach Nr.:
Item no.:
T60405-R6131-X402
K-Nr.:
K-no.:
23973 Stromkompensierte Funkentstördrossel / Common Mode Choke Datum:
Date:
27.08.2015
Kunde:
Customer
Typenelement / Standard Type Kd. Sach Nr.:
Customers part no.:
Seite 1 von 2
Page of
Hrsg.:
KB-E
editor
Bearb:
designer
Bi
KB-PM: FS
check
freig.: HS
released
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten
Copying of this document, disclosing it to third parties or using the contents there for any
purposes without express written authorization by use illegally forbidden.
Any offenders are liable to pay all relevant damages.
Maßbild (mm): Freimaßtoleranz DIN ISO 2768-c
Mechanical outline General tolerances
3
Beschriftung:
(marking)
3,5
+0
-0,5
1
5Toleranz der Stiftabstände ±0,3mm
(Tolerances grid distance)
DC = Date Code
F = Factory
4
8
15,24
18
22
10
12
0,35
7,62
25
0,2 DC
F
Anschlußschema:
Schematic diagram
4
5N1
18 N2
Betriebsdaten/Charakteristische Daten (Typische Werte):
Operational data/characteristic data (typical values):
L
s
/
L
leak
10 µH
and
f = 100 kHz
( Eine Wicklung kurzgeschlossen / one winding shorted)
Bemessungsisolationsspannung /
rated insulation voltage
:
U
is
= 300 V
RMS
(424 V
peak
) (Netzstromkreis /
connected to the mains
)
600 V
RMS
(848 V
peak
) (Nicht-Netzstromkreis /
not connected to the mains
)
I
N
= 2 × 2.0 A m 6.7 g*
Max. Betriebstemperatur
/
max.operating
temperature
T
op
= +130°C
Umgebungstemperatur /
ambient temperature:
T
a
= -40°C...+70°C
Lagertemperatur /
storage temperature:
T
st
= -40°C...+85°C
Prüfung /
Inspection
:
(V: 100%-Test; AQL...: DIN ISO 2859-Teil1)
1) (V) M3014: U
p,eff
= 1,65 kV, 1 s , N gegen/
to
N
2) (AQL 0,25) L
1
= 2.82 mH -30/+50% f = 100 kHz, U
AC,eff
= 1.1 V
3) (V) Polarität / Übersetzungsverhältnis: Toleranz ± 3% (±0Wdg.)
Polarity /
Turns ratio: Tolerance
4) (AQL 1/S4) R
Cu
120 m* für jede Wicklung /
for each winding
5) (Fix05) M3290: Lötbarkeitstest nach Abschnitt 1 /
solderability test acc. to chapter 1
6) (AQL 1/S4) M3200: Mechanische Prüfung /
mechanical test
Typprüfung /
Type test :
1) M3064: Stoßspannungsprüfung /
surge voltage test
: N gegen/
to
N
Einstellwerte /
Settings
: 1,2 µs / 50 µs Kurvenform
(waveform),
U
P,peak
= 4,0 kV
3 Impulse im Abstand t = 1s mit wechselnder Polarität
3 pulses in a cycle of with changing polarity
2) M3014: U
P,eff
= 1,65 kV, t = 5 s, N gegen/
to
N
Messungen nach Temperaturangleich der Prüflinge an Raumtemperatur *vorläufig/
preliminary
Measurements after temperature balance of the test samples at room temperature
Weitere Vorschriften:
Applicable documents:
Siehe Seite 2
See page 2
Datum Name Index Änderung
27.08.15 FS 82 Operational data. Updated unbalanced currents.UL-file no updated. CN-15-508.
Anschlüsse:
Connections:
Cu-verzinnt ca. 1,5 mm
Cu-tinned
X402
F DC
Beschriftung:
marking
ü = 1 : 1
f=10kHz f=100kHz DC
L
[mH] 12.1 2.82
|Z| [
900 3000
I
unbal.
[mA] 12 25 11
V A C U U M S C H M E L Z E
DATENBLATT
/ Specification
Sach Nr.:
Item no.:
T60405-R6131-X402
K-Nr.:
K-no.:
23973 Stromkompensierte Funkentstördrossel / Common Mode Choke Datum:
Date:
27.08.2015
Kunde:
Customer
Typenelement / Standard Type Kd. Sach Nr.:
Customers part no.:
Seite 2 von 2
Page of
Hrsg.:
KB-E
editor
Bearb:
designer
Bi
KB-PM: FS
check
freig.: HS
released
Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts
nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu
Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten
Copying of this document, disclosing it to third parties or using the contents there for any
purposes without express written authorization by use illegally forbidden.
Any offenders are liable to pay all relevant damages.
Weitere Vorschriften:
Applicable documents:
Konstruiert, gefertigt und geprüft nach EN 50178:1998-4 und erfüllt die Vorschriften.
Constructed, manufactured and tested in accordance with EN 50178:1998-4 and agrees with the standards.
Parameter /
Parameters:
:
Basisisolation /
Basic insulation
: N gegen/
to
N Verschmutzungsgrad 2 /
pollution degree 2
a) Netzstromkreis /
connected to the mains
Überspannungskategorie /
overvoltage category
: III
Bemessungsisolationsspannung /
rated insulation voltage
: U
is,eff
/
U
is,RMS
= 300 V (424 V
peak
)
Prüfspannung /
test voltage
: U
P,eff
/
U
P,RMS
1,2 kV
Stoßspanng. /
surge volt.age
:
U
P,max
/
U
P,peak
4,0 kV Kurvenform
(waveform):
1,2 µs / 50 µs
Kriechstrecke /
creepage
: N gegen/
to
N 3,0 (1,5) mm Isolierstoffklasse 1 (auf Bodenplatte)
Insulation material group 1 (on base plate)
3,0 (1,5) mm Isolierstoffklasse 1 (auf Kern)
Insulation material group 1 (on core)
Luftstrecke /
clearance
: N gegen/
to
N 3,0 mm
b) Nicht-Netzstromkreis /
not connected to the mains
Überspannungskategorie /
overvoltage category
: II
Bemessungsisolationsspannung /
rated insulation voltage
: U
is,eff
/
U
is,RMS
= 600 V (848 V
peak
)
Prüfspannung /
test voltage
: U
P,eff
/
U
P,RMS
1,65 kV
Stoßspanng. /
surge volt.age
:
U
P,max
/
U
P,peak
4,0 kV Kurvenform
(waveform):
1,2 µs / 50 µs
Kriechstrecke /
creepage
: N gegen/
to
N 3,0 mm Isolierstoffklasse 1 (auf Bodenplatte)
Insulation material group 1 (on base plate)
3,0 mm Isolierstoffklasse 1 (auf Kern)
Insulation material group 1 (on core)
Luftstrecke /
clearance
: N gegen/
to
N 3,0 mm
Design: Isoliersystem gemäß UL 1446 /
insulation system compliant to UL 1446
: File No.: E329745, 130°C (classB)
Bauelement-Träger, Draht und Isoliermaterialien /
component fixture, wire and insulation materials
: UL-gelistet
/ UL-listed
Typische Kurven /
Typical characteristics
100
1000
10000
100000
0.001 0.01 0.1 1 10 100 1000
frequency [MHz]
impedance |Z| [ ]
CMC 2A (1 phase)
5-R6131X402; K23973
0
10
20
30
40
0.001 0.01 0.1 1 10 100 1000
frequency [MHz]
insertion loss aE [dB]
(50 Ohm-System)
CMC 2A (1 phase)
5-R6131X402; K23973