CMF (Military RN and RL) Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES * Very low noise (- 40 dB) * Very low voltage coefficient (5 ppm/V) * Controlled temperature coefficient * Flame retardant epoxy coating * Commercial alternatives to military styles are available with higher power ratings. See appropriate catalog or web page. STANDARD ELECTRICAL SPECIFICATIONS POWER RESISTANCE RANGE RATING MAX. VISHAY MIL DIELECTRIC TOLERANCE WORKING MIL MIL-R-10509 DALE SPEC. STRENGTH MIL(1) % VOLTAGE STYLE MODEL SHEET P70 C P125 C VAC PRFV 100 ppm/C 50 ppm/C 25 ppm/C W W 22684 (D) (C) (E) CMF50 RN50 08 - 0.05 0.1, 0.25, 0.5, 1 200 - CMF55 RN55 07 0.125 0.10 0.1, 0.25, 0.5, 1 200 10 to 301K CMF60 RN60 01 0.25 0.125 0.1, 0.25, 0.5, 1 300 10 to 1M CMF65 RN65 02 0.50 0.25 0.1, 0.25, 0.5, 1 350 10 to 2M 49.9 to 1M CMF70 RN70 03 0.75 (2) 0.50 0.1, 0.25, 0.5, 1 500 10 to 2.49M CMF07 RL07 01 0.25 - 2, 5 250 CMF20 RL20 02 0.50 - 2, 5 350 10 to 100K 10 to 100K - 450 49.9 to 100K 49.9 to 100K - 450 49.9 to 499K 49.9 to 499K - 500 49.9 to 1M - 900 24.9 to 1M 24.9 to 1M - 900 - - - 51 to 150K 450 - - - 4.3 to 470K 700 Notes (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 Rev. D. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance 1010 min. dry; 108 min. after moisture test Operating Temperature Range C - 65/+ 175 (see derating curves for military range) Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others Solderability www.vishay.com 48 Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31027 Revision: 11-Mar-10 CMF (Military RN and RL) Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R MIL STYLE N 6 0 3 4 8 RESISTANCE VALUE 3 digit significant figure, followed by a multiplier Use "R" for values < 100 10R0 = 10 2152 = 21.5 k 2494 = 2.49 M CHARACTERISTIC RN50 RN55 RN60 RN65 RN70 D E = 25 ppm C = 50 ppm D = 100 ppm 3 F R TOLERANCE CODE B = 0.1 % C = 0.25 % D = 0.5 % F=1% 3 6 PACKAGING SPECIAL B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code Blank = Standard (Dash number) Historical Part Number example: RN60D3483F (will continue to be accepted) RN60 MIL STYLE D 3483 F CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE R36 PACKAGING New Global Part Numbering: RL07S471JR36 (preferred part numbering format) R L 0 MIL STYLE LEAD MATERIAL RL07 RL20 S = Solderable 7 S 4 7 RESISTANCE VALUE 2 digit significant figure, followed by a multiplier Use "R" for values < 10 4R3 = 4.3 202 = 2.0 k 474 = 470 k 1 J R TOLERANCE CODE G=2% J=5% 3 6 PACKAGING B14 = Tin/lead, bulk BSL = Tin/lead, bulk, single lot date code R36 = Tin/lead, T/R (full) RE6 = Tin/lead, T/R (1000 pieces) RSL = Tin/lead, T/R, single lot date code Historical Part Number example: RL07S471J (will continue to be accepted) RL07 S 471 J MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE R36 PACKAGING MATERIAL SPECIFICATIONS Element Nickel-chrome alloy Coating Flame retardant epoxy, formulated for superior moisture protection Core Termination CAGE CODE: 91637 Fire-cleaned high purity ceramic Standard lead material is solder-coated copper. Solderable and weldable. ENVIRONMENTAL SPECIFICATIONS General APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Shelf Life Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Resistance shifts due to storage at room temperature are negligible. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 V per V over a decade of frequency, with low and intermediate resistance values typically below 0.05 V per V. Document Number: 31027 Revision: 11-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 49 CMF (Military RN and RL) Vishay Dale Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL % OF RATED POWER Vishay Dale CMF resistors have an operating temperature range of - 65 C to + 175 C. They must be derated according to the following curves: 120 100 MIL-R-10509 Char. C and E Rating MIL-R-10509 Char. D Rating 80 60 40 20 MIL-PRF-22684 0 50 70 90 110 130 150 170 AMBIENT TEMPERATURE C DERATING DIMENSIONS in inches (millimeters) 1.50 0.125 [38.10 3.18] A D C (Max.) VISHAY DALE MODEL CMF50 CMF55 CMF60 CMF65 CMF70 CMF07 CMF20 B A B C (Max.) D 0.150 0.020 (3.81 0.51) 0.240 0.020 (6.10 0.51) 0.344 0.031 (8.74 0.79) 0.562 0.031 (14.27 0.79) 0.562 0.031 (14.27 0.79) 0.240 0.020 (6.10 0.51) 0.375 0.040 (9.53 1.02) 0.065 0.015 (1.65 0.38) 0.090 0.008 (2.29 0.20) 0.145 0.015 (3.68 0.38) 0.180 0.015 (4.57 0.38) 0.180 0.015 (4.57 0.38) 0.090 0.008 (2.29 0.20) 0.145 0.015 (3.68 0.38) 0.244 (6.20) 0.278 (7.06) (1) 0.425 (10.80) 0.687 (17.45) 0.687 (17.45) 0.278 (7.06) 0.425 (10.80) 0.016 0.002 (0.41 0.05) 0.025 0.002 (0.64 0.05) 0.025 0.002 (0.64 0.05) 0.025 0.002 (0.64 0.05) 0.032 0.002 (0.81 0.05) 0.025 0.002 (0.64 0.05) 0.032 0.002 (0.81 0.05) Note (1) 0.290" (7.37) for 0.25 % and 0.1 % resistance tolerances MILITARY POWER RATING MILITARY QUALIFIED WATTAGE 0.05 0.10 0.125 0.25 0.50 0.75 (1) MIL-R-10509 AT + 70 C (D) RN55 RN60 RN65 RN70 MIL-PRF-22684 AT + 125 C (C and E) RN50 RN55 RN60 RN65 RN70 - AT + 70 C RL07 RL20 - Notes * Commercial equivalents of military styles are available with higher power ratings. Consult factory. (1) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 Rev. D. www.vishay.com 50 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31027 Revision: 11-Mar-10 CMF (Military RN and RL) HEAT RISE (C ABOVE AMBIENT) Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL 120 CMF50 100 Vishay Dale CMF55 CMF07 CMF60 CMF20 80 CMF65, CMF70 60 40 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W MARKING Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = three significant figures and multiplier J = JAN (joint Army - Navy) brand RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines) J50D JAN, type, characteristic 1211 Value F137 Tolerance and 3 digit date code DALE Company logo 0137J 4 digit date code and JAN brand RN55D Type and characteristic 1211F Value and Tolerance Note * RL series are color banded per MIL-PRF-22684 PERFORMANCE MIL-R-10509 REQUIREMENT MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E + 200 ppm/C - 500 ppm/C 50 ppm/C 25 ppm/C 200 ppm/C 100 ppm/C 50 ppm/C 25 ppm/C 200 ppm/C MILmax. MILmax. MILmax. MILmax. Thermal Shock 0.50 % R 0.25 % R 0.25 % R 1.00 % R Short Time Overload 0.50 % R 0.25 % R 0.25 % R 0.50 % R Low Temperature Operation 0.50 % R 0.25 % R 0.25 % R 0.50 % R Moisture Resistance 1.50 % R 0.50 % R 0.50 % R 1.50 % R Shock 0.50 % R 0.25 % R 0.25 % R 0.50 % R Vibration 0.50 % R 0.25 % R 0.25 % R 0.50 % R Load Life 1.00 % R 0.50 % R 0.50 % R 2.00 % R Dielectric Withstanding Voltage 0.50 % R 0.25 % R 0.25 % R 0.50 % R Effect of Solder 0.50 % R 0.10 % R 0.10 % R 0.50 % R MIL Temperature Coefficient Applicable Vishay Dale Temperature Coefficient TEST Document Number: 31027 Revision: 11-Mar-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 51 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1