(1/2)
002-01 / 20051130 / ea442_cxal0605.fm
• All specifications are subject to change without notice.
DC to AC Inverters
Connector type, Dimming, 4W, for 1 Bulb
CXA Series CXA-L0605-VSL
FEATURES
• For 1 bulb.
• Applicable panel size∗ : 5 to 15-inch
• With brightness control function (Pulse Wide Modulation mode).
• The high-voltage terminals and patterns are coated with silicone
so as to avoid the defects caused by dust.
• It is a product conforming to RoHS directive.
∗ The applicable panel size is for typical reference dimensions.
TEMPERATURE AND HUMIDITY RANGES
SHAPES AND DIMENSIONS
TERMINAL NUMBERS AND FUNCTIONS
CN1
∗ Brightness can be controlled by adjusting Vbr within a range of 0 to 3V.
CN2
Conformity to RoHS Directive
Temperature
range (°C)
Operating 0 to +60
Storage –20 to +85
Humidity range(%)RH 95max.
[Maximum wet-bulb temperature 38°C. No dew.]
Connector manufacturer's company and type Symbol
1 Input connector Molex Japan Co., Ltd. 53261-0571 CN1
2 Output connector Japan Solderless Terminal Co., Ltd. SM02B-BHSS-1 CN2
(4)82±0.2
1 2
2-ø2.2±0.1
∗1
95.5max.
20max.
12.8±0.2 (4.5)
45∗2
8max.
T1
1
CN2
CN1
1
∗1 Substrate(PWB: Printed wiring board): Flame retardant material UL94V-0(FR-4 or CEM-3) t=1mm
∗2 : High-voltage generator (The entire surface within a range of 45mm away from the end of the base in the output)
Weight: 13.7g typ.
Dimensions in mm
Terminal No. Function Symbol
CN1-1 Input voltage Edc: 4.75 to 5.25V/5V Vin
CN1-2 0V GND
CN1-3 Remote voltage Edc 0V: off/5 to 5.25V:on Vrmt
CN1-4 Brightness dimmer voltage ∗
Edc: 0 to 3V (Maximum brightness on 0V) Vbr
CN1-5 Used in the internal circuits, do not connect. N.C.
Terminal No. Function Symbol
CN2-1 Output [High voltage] Irms 3 to 6mA VHIGH
CN2-2 ——N.C.
CN2-3 Output [Low voltage] (2V) VLOW
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/2)
002-01 / 20051130 / ea442_cxal0605.fm
• All specifications are subject to change without notice.
CXA-L0605-VSL
ELECTRICAL CHARACTERISTICS
TYPICAL CONNECTIONS
EXAMPLE OF VOLTAGE DIMMER CONTROL
EXAMPLE OF POTENTIOMETER DIMMER CONTROL
NO DIMMER CONTROL(BRIGHTNESS MAX.)
∗ SW a:on, b:off
Item Unit Symbol Specification Condition Brightness
min. typ. max. Vin(V) Vbr(V) Ta(°C) RL(kΩ)
Output current Irms mA Iout
5.3 6 6.7 5±0.25 0 0 to +60 70 to 90 Maximum
5.4 6 6.6 5±0.25 0 23±5 80 Maximum
2.5 3 3.5 5±0.25 3 0 to +60 226 Minimum
Input current Idc A Iin —0.7 0.8 5±0.25 0 0 to +60 70 to 90
Oscillation frequency kHz FL 35 45 55 5±0.25 0 0 to +60 70 to 90
Open circuit output voltage Erms kV Vopen 1.5 1.7 —5±0.25 0 0 to +60 ∞
CN1-5
CN1-4
CN1-3
CN1-2
CN1-1
CN2-3
CN2-1
Vbr
0 to
3V
Vin
4.75 to
5.25V
RL
(CCFL)
aSW
∗
b
Vrmt
5 to
5.25V
CN1-5
CN1-4
CN1-3
CN1-2
CN1-1
CN2-3
CN2-1
Vin
4.75 to
5.25V
RL
(CCFL)
aSW
∗
b
Vrmt
5 to
5.25V Vbr
3V
50kΩ
ex.
CN1-5
CN1-4
CN1-3
CN1-2
CN1-1
CN2-3
CN2-1
Vin
4.75 to
5.25V
RL
(CCFL)
