Sensing and Productivity Solutions 1
Heavy Duty products. Built for the toughest applications.
Honeywell Sensing and Productivity Solutions (S&PS) offers
decades of experience in the heavy duty pressure products
industry. That’s why, industry-wide, our heavy duty pressure
sensors and transducers are known for enhanced quality,
reliability, and service – which adds up to outstanding value for
your applications.
Heavy Duty Pressure Sensors are small, allowing them to be
used on their own in tight packages or as the building block for
a complete transducer. The 13 mm Series and the 19 mm Series
were developed for potential use in pressure applications that
involve measurement of hostile media in harsh environments
FEATURES
HEAVY DUTY PRESSURE
SENSORS
13 mm Series.
Features: Rugged, isolated stainless steel
package • Accommodates media that will
not adversely affect 316L stainless steel
• Based on reliable semiconductor
technology • Calibrated and temperature
compensated • Voltage or current supply
options • Absolute and sealed gage
pressures • For potential applications from
500 psi to 5,000 psi
Benets: Used in high pressure potential
applications involving measurement of
hostile media in harsh environments.
Piezoresistive semiconductor sensor chip
in oil-isolated housing with or without
an integral ceramic for temperature
compensation and calibration is designed
to provide reliable, stable, and accurate
performance. Weld-ring collar and special
back support ring for enhanced cycle
life capability as well as further package
integration in OEM applications. Potential
applications include industrial and
Heavy Duty
Pressure Sensors/
Transducers Line Guide
continued on page 4
hydraulic controls, tank pressure, pressure
transmitters, and process control systems.
19 mm Series.
Features: Rugged, isolated stainless steel
package • Accommodates media that will
not adversely affect 316L stainless steel
• Small size • Based on reliable
semiconductor technology • Absolute and
gage pressures • Vacuum compatible,
isolated sensors • Calibrated and
temperature compensated (some listings)
• For potential applications up to 500 psi
Benets: Variety of pressure connections
allow use in wide range of OEM
equipment. Uncompensated version
for use in potential applications using
specialized circuit designs. Rugged
for use in potential applications where
corrosive liquids or gases are monitored
and may also be exposed to a vacuum
such as industrial controls, process control
systems, industrial automation and flow
control, and pressure calibrators.
compatible with 316 stainless steel, a type of steel that
increases corrosion resistance, improves resistance to pitting
from chloride ion solutions, and provides increased strength at
high temperatures.
Heavy Duty Pressure Transducers are complete amplified and
compensated pressure measurement solutions. With a choice
of ports, connectors, outputs and pressure ranges, the, MLH
Series, SPT Series, PX2 Series, and PX3 Series transducers can
be configured to meet the needs of the application. They are
engineered to be resistant to a wide variety of media for use in
most harsh environments.
HEAVY DUTY PRESSURE
TRANSDUCERS
SPT Series.
Features: Based on reliable
semiconductor technology • Rugged,
316L stainless steel wetted parts
• Calibrated and temperature
compensated • Absolute, gage, sealed
gage, and vacuum gage pressures
• For use in potential medical applications
where compatibility is a problem.
Benets: Variety of pressure
connections allows use in wide range
of OEM equipment. For use in potential
applications where corrosive liquids and
gases are monitored such as industrial
automation and flow control, pressure
instrumentation, hydraulic systems, and
process control.
MLH Series.
Features: All-metal wetted parts • No
internal elastomeric seals • Stable and
creep free • Input reverse voltage
2 Sensing and Productivity Solutions
13 mm Series 19 mm Series
Pressure connection weld ring with back support,
1/8-27 NPT, 1/4-18 NPT, 7/16 UNF
weld ring with body O-ring, flush mount,
flush mount with flange, 1/4-18 NPT, 1/8-
27 NPT, 7/16 UNF, 1/4 BSPP, Euro O-ring,
1/4 VCR (female nut)
Measurement type absolute, sealed gage absolute, gage, vacuum gage
Construction wetted parts 316L SS wetted parts 316L SS
Pressure range 0 psi to 500 psi through 0 psi to 5000 psi 0 psi to 3 psi through 0 psi to 500 psi
Output 0 mV to 100 mV (nominal) 0 mV to 100 mV (nominal)
Linearity ±0.25 %BFSL max. ±0.25 %BFSL max.
Amplified no no
Compensated temperature
range 0 °C to 82 °C [32 °F to 180 °F] 0 °C to 82 °C [32 °F to 180 °F]
Termination ribbon cable ribbon cable
When reliability is
demanded, Honeywell
delivers.
Heavy Duty Pressure Sensors
and Transducers are found
in applications where they
cannot be easily replaced
— where supreme durability
is a top priority. That’s why
you’ll find Honeywell S&PS
heavy duty pressure products
performing expertly in many
potential applications, such
as compressors and hydraulic
controls, and in industries
as diverse as aerospace,
medical, transportation,
agriculture, refrigeration,
and industrial. Our full line of
products deliver enhanced
performance and reliability,
plus: absolute, gage and
sealed-gage measurement; a
wide array of pressure ranges,
port styles, termination types,
and outputs; package types
from miniature surface mount
sensors to high-end stainless
steel isolated (for stringent
process control); pressure
ranges from 3 psi to 8,000 psi;
and corrosion resistance.
Heavy Duty Pressure Sensors/Transducers Line
Guide
Heavy Duty
Pressure Sensors
SPT Series
Pressure connection 1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF, 1/4-19 BSPP, 1/4 VCR gland
Measurement type absolute, gage, sealed gage, vacuum gage pressures
Construction wetted parts 316L SS
Pressure range 0 psi to 3 psi through 0 psi to 5000 psi
Output 4 mA to 20 mA, 0 mV to 100 mV, 1 Vdc to 5 Vdc
Linearity ±0.25 %BFSL max.
Amplified yes, amplified and unamplified
Compensated temperature
range -10 °C to 85 °C [14 °F to 185 °F]
Termination bayonet connector, cable
Heavy Duty
Pressure
Transducers
Sensing and Productivity Solutions 3
MLH Series
Pressure connection
1/4-18 NPT, M12 x 1.5 (ISO 6149), M14 x 1.5 (ISO 6149), 3/8-24 UNF (SAE-3 O-ring boss), M18 x 1.5 (ISO 6149),
1/8 in-27 NPT, 1/2 in-20 UNF (SAE-5 O-ring boss), M10 x 1 (ISO 6149), 1/4 in SAE female Schrader (7/16-20 UNF-2B internal
thread), 7/16-20 UNF (SAE-4 O-ring boss), 1/2 in NPT; 9/16-18 UNF (SAE-6 O-ring boss), R 1/4-19 BSPT (ISO 7-1 tapered
thread), G 1/4-19 (DIN 3852-2), G 1/8 with O-ring groove, M16 x 1.5 (ISO 6149), G 1/4 with O-ring groove, G 1/8 (DIN 3852-2),
R 1/8-28 BSPT (ISO 7-1 tapered thread), M20 x 1.5 (ISO 6149), 1/2-20 (SAE J514)
Measurement type gage, sealed gage
Construction port: 304L stainless steel; diaphragm: Haynes 214 alloy
Pressure range 0 psi to 50 psi through 0 psi to 8000 psi
Output
ratiometric (from 5 Vdc excitation): 0.5 Vdc to 4.5 Vdc
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
Accuracy ±0.25 %FSS (±0.5 %FSS on ranges below 100 psi)
Amplified yes
Compensated temperature
range
ratiometric output: -40 °C to 125 °C [-40 °F to 257 °F]
regulated and current outputs: -40 °C to 125 °C [-40 °F to 257 °F]
(See product literature for operating and temperature compensated area graphics.)
Termination Delphi Metri-Pack 150, Hirschmann (mates with G4W1F), M12 x 1 (Brad Harrison micro), DIN 43650-C, 8 mm-male, Amp
Superseal 1.5; cable (1 m), cable (3 m), flying leads (20 AWG – 6 in), Deutsch DTM04-3P (integral)
Heavy Duty
Pressure
Transducers
SPT Series
Pressure connection 1/8-27 NPT, 1/4-18 NPT, 7/16-20 UNF, 1/4-19 BSPP, 1/4 VCR gland
Measurement type absolute, gage, sealed gage, vacuum gage pressures
Construction wetted parts 316L SS
Pressure range 0 psi to 3 psi through 0 psi to 5000 psi
Output 4 mA to 20 mA, 0 mV to 100 mV, 1 Vdc to 5 Vdc
Linearity ±0.25 %BFSL max.
Amplified yes, amplified and unamplified
Compensated temperature
range -10 °C to 85 °C [14 °F to 185 °F]
Termination bayonet connector, cable
PX2 Series
Pressure connection
7/16-20 UNF 1/4 in 45° Flare Female Schrader (SAE J512), 7/16-20 UNF 45° Flare Male (SAE J513), 7/16-20 UNF 37° Flare
Male (SAE J514), G1/4 (ISO 1179-3), G1/8 (ISO 1179-3), M12 x 1.5 (ISO 6149-3), 1/4-18 NPT, 1/8-27 NPT, 9/16-18 UNF, (SAE
J1926-3), 7/16-20 UNF (SAE J1926-3)
Measurement type absolute, sealed gage, vented gage
Construction port and housing: 304 stainless steel; connector: PBT 30% GF
Pressure range 1 bar to 70 bar | 100 kPa to 7 MPa | 15 psi to 1000 psi
Output
ratiometric: 5.0 V, 10 %Vs to 90 %Vs; 5.0 V, 5 %Vs to 95 %Vs; 3.3 V, 10 %Vs to 90 %Vs; 3.3 V, 5 %Vs to 95 %Vs
regulated: 1 Vdc to 6 Vdc, 0.25 Vdc to 10.25 Vdc, 0.5 Vdc to 4.5 Vdc, 1 Vdc to 5 Vdc
current: 4 mA to 20 mA
Accuracy ±0.25 %FSS
Total Error Band ±2 %FSS at -40 °C to 125 °C [-40 °F to 257 °F]
Amplified yes
Compensated temperature
range -40 °C to 125 °C [-40 °F to 257 °F]
Termination Delphi Metri-Pack 150 (UL 94 HB or V-0 options), Micro M12, DIN, Deutsch, cable harness (1 m, 2 m, 3 m, or 5 m).
Heavy Duty
Pressure
Transducers
4 Sensing and Productivity Solutions
PX3 Series
Pressure connection 7/16-20 UNF 1/4 inch 45° Flare Female Schrader (SAE J512), G1/4 (ISO 1179-3), M12 x 1.5 (ISO 6149-3), 1/4-18 NPT,
1/8-27 NPT
Measurement type absolute, sealed gage
Construction port: brass C36000 (Pb content: 3.7% max.), connector: PBT 30% GF
Pressure range 1 bar to 46 bar | 15 psi to 667 psi
Output ratiometric: 0.5 Vdc to 4.5 Vdc
Accuracy ±0.25 %FSS
Total Error Band ±1.0 %FSS at -20 °C to 85 °C [-4 °F to 185 °F]
±2.0 %FSS at <-20 °C, >85 °C [<-4 °F, >185 °F]
Amplified yes
Compensated temperature
range -40 °C to 125 °C [-40 °F to 257 °F]
Termination Metri-Pack 150 (UL V-0)
Heavy Duty
Pressure
Transducers
protection • Less than 2 ms response
time • Easy customization • Rated IP65 or
better • Exceeds CE heavy industrial EMC
for use in areas of high RFI/EMI
• Amplified and temperature compensated
• Wide choice of connections and
terminations • Calibration for special
pressure ranges
Benets: Combines ASIC technology
with media isolated, metal diaphragm.
All-metal wetted parts for use in a variety
of potential fluid applications. Amplified
outputs often eliminate cost of external
amplifiers. Wide selection of industry-
standard connectors and process
ports for enhanced reliability and user
flexibility. Potential applications include
compressors, refrigeration and HVAC/R,
general industrial and hydraulics, multiple
transportation applications including
braking and alternate fuels, medical.
PX2 Series.
Features: Cost-effective • Designed for
configurability • Application expertise
• Global support • Wide selection of
options • Short lead time • Small Total
Error Band (TEB) • Fast response time
• Application life • Six Sigma design
standards • Environmentally tough • Wide
operating temperature range • Shock and
vibration resistant • Good EMC protection
Benets: Precise pressure measurement
solution optimizes system performance
at a competitive cost. Over 60,000
standard configurations. Honeywell’s
knowledgeable application engineers are
available to answer customer’s specific
design questions during the development
of their product. Honeywell’s global
presence offers immediate product
and application support throughout the
development cycle, from design to global
manufacturing. Numerous standard or and
warranty requirements. Fast response time
maximizes system performance. 10 million
cycles (minimum) to operating pressure
provides enhanced life in the application.
AC and AD output transfer functions
offer a 3.3 V ratiometric output with a
<7 ms turn-on time to enable use when
energy efficiency is a key requirement.
Six Sigma design standards result in
a high level of quality, performance,
and consistency so that customers are
assured that the transducer will perform
to specification. Compatibility with a
wide variety of harsh media, including
brake fluid, common hydrofluorocarbon
refrigerants, engine oil, tap water,
hydraulic fluids, and compressed air, up
to IP69K ingress protection sealing, and
100 V/m radiated immunity allow for use in
tough environments. Wide compensated
operating temperature range allows
Sensing and Productivity Solutions 5
Sensing and Productivity Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
008154-12-EN IL50
March 2016
Copyright © 2016 Honeywell International Inc. All rights reserved.
Warranty. Honeywell warrants goods of
its manufacture as being free of defective
materials and faulty workmanship.
Honeywell’s standard product warranty
applies unless agreed to otherwise by
Honeywell in writing; please refer to your
order acknowledgement or consult your
local sales office for specific warranty
details. If warranted goods are returned to
Honeywell during the period of coverage,
Honeywell will repair or replace, at its
option, without charge those items it finds
defective. The foregoing is buyers sole
remedy and is in lieu of all warranties,
expressed or implied, including those
of merchantability and tness for a
particular purpose. In no event shall
Honeywell be liable for consequential,
special, or indirect damages.
While we provide application assistance
personally, through our literature and
the Honeywell web site, it is up to the
customer to determine the suitability of the
product in the application.
Specifications may change without notice.
The information we supply is believed to
be accurate and reliable as of this printing.
However, we assume no responsibility for
its use.
To learn more about Honeywell Sensing
and Productivity Solutions’ products, call
+1-815-235-6847 or 1-800-537-6945,
visit sensing.honeywell.com, or e-mail
inquiries to info.sc@honeywell.com
customers to design the same sensor
into a variety of applications. Shock and
vibration resistance increase flexibility
of use within the application. Good EMC
protection means that the transducer
will not be damaged by environmental
electromagnetic interference. Potential
applications include industrial HVAC/R
and air compressors, as well as a wide
variety of general system and factory
automation pump, valve and fluid pressure
applications.
PX3 Series.
Features: Pressure range: 1 bar to
46 bar | 15 psi to 667 psi (absolute and
sealed gage) • Ratiometric output: 0.5
Vdc to 4.5 Vdc • Fully calibrated and
temperature compensated • Total Error
Band: ±1.0 %FSS from -20 °C to 85 °C
[-4 °F to 185 °F] • External freeze/thaw
resistance: 6 cycles from -30 °C to 50
°C [-22 °F to 122 °F] • High insulation
resistance: >100 MOhm, 1500 Vdc
• Dielectric strength: AC1500V, 1 min. or
AC1800, 1 s • Current consumption: 3.5
mA max. • EMC Radiated Immunity: 200
V/m per ISO 11452-2 • Ingress protection
up to IP67 • Response time: <2 ms
• RoHS, REACH, and CE compliant
Benets: Total Error Band provides
the most comprehensive, clear and
meaningful indication of the sensor’s
true measurement performance over a
specified temperature range; small error
promotes system uptime and efficiency.
Survives exposure to frost, commonly
found in refrigeration systems. Protects
the user and sensor in high over-voltage
situations, and ensures that the device
is compliant with industry standards.
Operates reliably in the presence of
electro-magnetic fields, such as near
wireless signals, RF communication, and
electrical devices. Helps to reduce energy
costs, and enhances product life if used
in battery driven systems. Compatible
with common HFC (hydrofluorocarbon)
refrigerants, next generation low global
warming potential (GWP) refrigerants such
as R32 and R1234ZE, petroleum oils,
lubricants, hydraulic fluids, brake fluids,
air and water. (For ammonia and other
corrosive media, see Honeywell’s MLH
Series and SPT Series.) Potential industrial
applications include refrigerant pressure
monitoring in HVAC/R systems and air
compressor system pressure. Potential
transportation applications include air
system monitoring and hydraulic oil
pressure monitoring.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Honeywell:
MLH300PSD01A MLH040BSG17B MLH02KPSD01A MLH016BGL06B MLH100PGD14B MLH010BGM06B
MLH040BSG13B MLH125PGB06A MLH100PSC06A MLH01KPST04A MLH100PGP01A MLH100BSB10A
MLH02KPSB10A MLH150PGD01E MLH250BSB11D MLH350BSB14D MLH750PSP09B MLH100BSG02B
MLH03KPSL06G MLH250BSB10A MLH016BGG02B MLH016BSM14B MLH160BSH08A MLH250BST12E
MLH02KPSL06A MLH050PGL06A MLH150PGP01E MLH300PGL06A MLH150PGL06G MLH006BGG11E
MLH500PSD13B MLH050PGG20B MLH100PGP10A MLH250BSB14D MLH250BGB10A MLH300PGL01B
MLH016BGB06B MLH250PSM01B MLH300PSG01G MLH100BSG13B MLH050PGT01B MLH400BSB01D
MLH100PGB06C MLH150BSH08A MLH016BGG13B MLH400BSB01B MLH010BGB20B MLH100BST14A
MLH016BGB20B MLH100PSB06G MLH050PGB20B MLH010BSG17B MLH016BSH14A MLH350PSB09A
MLH125PGB06B MLH100PGB06E MLH550BSB01A MLH02KPSB01A MLH010BGG20B MLH050PGD01B
MLH100BSL14E MLH040BSL14A MLH02KPSG06A MLH01KPGB06C MLH006BGG20B MLH200PGT06B
MLH03KPGL01C MLH010BGD01C MLH016BGG01B MLH150PGL06A MLH010BSC17G MLH004BGG01B
MLH02KPST10E MLH550BST01A MLH700PSB09D MLH025BSB01A MLH025BGG02B MLH350BST12E
MLH150PGT12E MLH01KPSC06A MLH01KPSB06G MLH03KPSB01C MLH004BGT14E MLH300PSB06B
MLH250BSM17D MLH500PST12E MLH500BSH08A MLH010BGP01B MLH350BST13E MLH100PSB10A
MLH01KPSB21A MLH500PST02A MLH05KPST10A MLH250BSG13B MLH350BSB01E MLH016BSM05G
MLH100PSCDJ1230 MLH300PGB01B MLH350BSL07E MLH200PGB06A