57mm (2.3INCH) SINGLE DIGITNUMERIC DISPLAY P/N: SBC23-11EGWA Features HIGH EFFICIENCY RED GREEN Description 2.3 INCH DIGIT HEIGHT. The High Efficiency Red source color devices are LOW CURRENT OPERATION. made With Gallium Arsenide Phosphide on Gallium EXCELLENT CHARACTER APPEARANCE. Phosphide Orange Light Emitting Diode. HIGH LIGHT OUTPUT. The Green source color devices are made with Gallium EASY MOUNTING ON P.C. BOARDS OR SOCKETS. Phosphide Green Light Emitting Diode. MULTICOLOR AVAILABLE. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2332 REV NO: V.5 DATE:NOV/23/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1301000676 Selection Guide Part No. Dice Iv (ucd) @ 10mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) SBC23-11EGWA Description Min. Typ. 4700 18000 4700 24000 WHITE DIFFUSED GREEN (GaP) Common Cathode,Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red Green D Dominant Wavelength 1/2 Max. Units Test Conditions 627 565 nm IF=20mA High Efficiency Red Green 625 568 nm IF=20mA Spectral Line Half-width High Efficiency Red Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage Per Segment or (DP) High Efficiency Red Green 8(4) 8.8(4.4) 10(5) 10(5) V IF=20mA IR Reverse Current Per Segment or (DP) High Efficiency Red Green 10 10 uA VR = 20(10)V Absolute Maximum Ratings at TA=25C Parameter Power dissipation Per Segment or (DP) High Efficiency Red Green 300(150) 250(125) Units mW DC Forward Current Per Segment or (DP) 30 25 mA Peak Forward Current [1] Per Segment or (DP) 160 140 mA Reverse Voltage Per Segment or (DP) 20(10) Operating/storage Temperature V -40C To +85C Lead Solder Temperature [2] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAD2332 REV NO: V.5 DATE:NOV/23/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1301000676 SBC23-11EGWA High Efficiency Red SPEC NO: DSAD2332 REV NO: V.5 DATE:NOV/23/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1301000676 Green SPEC NO: DSAD2332 REV NO: V.5 DATE:NOV/23/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1301000676 PACKING & LABEL SPECIFICATIONS SBC23-11EGWA Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD2332 REV NO: V.5 DATE:NOV/23/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1301000676