https://www.phoenixcontact.com/us/products/2924210
10/27/2014Page1/5
Repeater power supply-MACX MCR-SL-RPSSI-I-UP-SP-2924210
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Repeater power supply for supplying 2 and 3-conductor transmitters with HART transmission and wide range
power supply, SIL, spring-cage connection
Product Features
250 Ω resistor that can be activated via DIP switches to increase HART impedance for low-resistance systems
Up to SIL 2 according to EN 61508
Installation in zone 2, protection type "n" (EN 60079-15) permitted
Bidirectional transmission of digital HART communication signals
Plug-in screw or spring-cage connection technology (Push-in technology), with integrated sockets for HART communicators
Wide-range power supply of 19.2 ... 253 V AC/DC
3-way electrical isolation
0/4 ... 20 mA output (active or passive), 0/1 ... 5 V, can be selected via DIP switches
0/4 ... 20 mA input (powered or not powered)
Key commercial data
Packing unit 1 pc
Weight per Piece (excluding packing) 140.0 GRM
Custom tariff number 85437090
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
https://www.phoenixcontact.com/us/products/2924210
10/27/2014Page2/5
Repeater power supply-MACX MCR-SL-RPSSI-I-UP-SP-2924210
Technical data
Dimensions
Width 17.5 mm
Height 99 mm
Depth 114.5 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport) -40 °C ... 80 °C
Maximum altitude ≤ 2000 m
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Degree of protection IP20
Input data
Current input signal 0 mA ... 20 mA
4 mA ... 20 mA
Transmitter supply voltage > 16 V (at 20 mA)
Voltage drop < 3.5 V (in input isolating amplifier operation)
Output data
Signal output Current output
Voltage output signal 0 V ... 5 V (internal resistance, 250 Ω, 0.1%)
Current output signal 0 mA ... 20 mA (active)
4 mA ... 20 mA (active)
0 mA ... 20 mA (14 ... 26 V ext. source voltage)
4 mA ... 20 mA (14 ... 26 V ext. source voltage)
Transmission Behavior 1:1 to input signal
Load/output load current output < 600 Ω (I output)
Output ripple < 20 mVrms
Power supply
Supply voltage range 24 V ... 230 V AC/DC (-20%/+10%, 50/60 Hz)
Max. current consumption < 75 mA (at 24 V DC)
Power consumption < 1.8 W
Connection data
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 16
https://www.phoenixcontact.com/us/products/2924210
10/27/2014Page3/5
Repeater power supply-MACX MCR-SL-RPSSI-I-UP-SP-2924210
Technical data
Connection data
Stripping length 8 mm
Connection method Spring-cage connection
General
No. of channels 1
Maximum transmission error < 0.1 % (of final value)
Transmission error, typical < 0.05 % (of final value)
Maximum temperature coefficient < 0.01 %/K
Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step)
Status display Green LED (supply voltage)
Inflammability class according to UL 94 V0
Pollution degree 2
Surge voltage category II
Housing material PA 66-FR
Color green
Designation Input/output/power supply
Electrical isolation 300 Vrms (Rated insulation voltage (surge voltage category II; pollution
degree 2, safe isolation as per EN 61010-1))
2.5 kV (50 Hz, 1 min., test voltage)
Conformance CE-compliant, additionally EN 61326
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada UL applied for
Functional Safety (SIL) SIL 2 according to EN 61508
Data communication (bypass)
HART function Yes
Protocols supported HART
Classifications
eCl@ss
eCl@ss 4.0 27210120
eCl@ss 4.1 27210120
eCl@ss 5.0 27210120
eCl@ss 5.1 27210120
eCl@ss 6.0 27210120
eCl@ss 7.0 27210120
eCl@ss 8.0 27210120
https://www.phoenixcontact.com/us/products/2924210
10/27/2014Page4/5
Repeater power supply-MACX MCR-SL-RPSSI-I-UP-SP-2924210
Classifications
ETIM
ETIM 2.0 EC001485
ETIM 3.0 EC001485
ETIM 4.0 EC001485
ETIM 5.0 EC002653
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 39121008
Approvals
Approvals
Approvals
Functional Safety
Ex Approvals
ATEX
Approvals submitted
Approval details
Functional Safety
Drawings
https://www.phoenixcontact.com/us/products/2924210
10/27/2014Page5/5
Repeater power supply-MACX MCR-SL-RPSSI-I-UP-SP-2924210
Block diagram
Zone 2
Div. 2
IN OUT
4.3
4.2
3.3
3.2
Power
24V ...230V AC/DC
250 Ω
4.1 3.1
1.2
1.1
250 Ω
S2
S1
–
~
–
~
–
~
PLC / DCS
passive
3.2
3.1
-
+
active
-
+
3.3
3.2
1.2
1.1
Sensor / Field
4.2
4.1
2-wire
4.3
4.2
4-wire
US
+
-
+
-
or
Connection example
Dimensioned drawing
114,5
17,5
99
112,5
116 (SP)
Block diagram
IN OUT
4.3
4.2
4.1
3.3
3.1
1.2
4.3
4.2
4.1
3.2
1.1
4.2
–
–
+
+
24...230
VAC/DC
≃
250 W
250 W
+
-
Source +
-Sink
S2
S1
Diagram
0
1200Hz
"1"
2200Hz
"0"
Approximately
+0.5mA
Approximately
–0.5mA
Analog
signal
Signal transmission analog and digital at the same time
Phoenix Contact 2014 © - all rights reserved
http://www.phoenixcontact.com