27
Buildout-Style Attenuators
Buildout-style attenuators provide superior performance for all single-mode in line attenu-
ation requirements. Standard attenuation values are 3, 5, 10, 15 and 20dB. Buildout
attenuators are available in SC, ST, LC, and FC connector styles. They use no air gap,
filters or light path discontinuities. Attenuation is achieved by controlled absorption of light
energy. This results in a polarization insensitive device with high power handling capability,
environmentally stable and exceptionally responsive across a wide bandpass range.
ULTRA FC SINGLE-MODE BOAS (MALE TO FEMALE)
CONFIG. PART NO. VALUE (DB) BACK REFL.
FC / UP C201004 1 > 55dB
FC / UP C201010 2 > 55dB
FC / UP C201013 3 > 55dB
FC / UP C201017 4 > 55dB
FC / UP C201022 5 > 55dB
FC / UP C203303 6 > 55dB
FC / UP C203308 7 > 55dB
FC / UP C203314 8 > 55dB
FC / UP C203317 9 > 55dB
FC / UP C201028 10 > 55dB
FC / UP C203321 11 > 55dB
FC / UP C203326 12 > 55dB
FC / UP C201031 15 > 55dB
FC / UP C201035 20 > 55dB
FC / UP C203332 25 > 55dB
FC / UP C203335 30 > 55dB
ANGLE FC SINGLE-MODE BOAS (MALE TO FEMALE)
CONFIG. PART NO. VALUE (DB) BACK REFL.
FC / AP C197878 5 > 60dB
FC / AP C197881 10 > 60dB
FC / AP C197885 15 > 60dB
FC / AP C197890 20 > 60dB
NOTE: Attenuators are available in 1dB increments. Contact customer service for ordering information.
Features
• Long-term reliability
• Excellent environmental stability
• Low ripple, wavelength independent
attenuation
• Certified to more than 125mw
continuous power handling capability
with no degradation in performance
• Polarization insensitive
• Telcordia™ approved
Application
• Broadband Network
• Video Distribution
• Long Haul Telecommunications
(CLEC, CAPS)
• Local Area Networks (LAN)
• Network Testing
• Passive Optical Networks
• Telco
• Fiber in the Loop
ULTRA SC SINGLE-MODE BOAS (MALE TO FEMALE)
CONFIG. PART NO. VALUE (DB) BACK REFL.
SC / UP C200938 1 > 55dB
SC / UP C200941 2 > 55dB
SC / UP C200945 3 > 55dB
SC / UP C200950 4 > 55dB
SC / UP C200956 5 > 55dB
SC / UP C200959 6 > 55dB
SC / UP C201946 7 > 55dB
SC / UP C200963 8 > 55dB
SC / UP C201949 9 > 55dB
SC / UP C200968 10 > 55dB
SC / UP C201953 11 > 55dB
SC / UP C201958 12 > 55dB
SC / UP C200974 15 > 55dB
SC / UP C200977 20 > 55dB
SC / UP C200981 25 > 55dB
SC / UP C200986 30 > 55dB
ANGLE SC SINGLE-MODE BOAS (MALE TO FEMALE)
CONFIG. PART NO. VALUE (DB) BACK REFL.
SC / AP C197899 5 > 60dB
SC / AP C197903 10 > 60dB
SC / AP C197908 15 > 60dB
SC / AP C197914 20 > 60dB
ULTRA ST SINGLE-MODE BOAS
CONFIG. PART NO. VALUE (DB) BACK REFL.
ST / UP C222113 5 > 55dB
ST / UP C222118 10 > 55dB
ST / UP C222124 15 > 55dB
ST / UP C222127 20 > 55dB
ULTRA LC SINGLE-MODE BOAS
CONFIG. PART NO. VALUE (DB) BACK REFL.
LC / UP CS000091 5 > 55dB
LC / UP CS000092 10 > 55dB
LC / UP CS000093 15 > 55dB
LC / UP CS000094 20 > 55dB
© 2002, AFL Telecommunications, all rights reserved. Revision 0, 4.01.05
Specifications are subject to change without notice.
Specifications
PARAMETER VALUE
Standard Attenuation Values 5, 10, 15 and 20dB
Attenuation Tolerance Standard at 10%
Operating Temperature Range: -40 to +75°C
Vibration resistance <0.1X attenuation value
Back Reflection -55dB in Ultra Polish (UPC); -60dB in Angle Polish (APC)
Operating Wavelength: 1310 & 1550nm +/-25nm
Ordering Information