Standard Force Sensor TPE-500 SERIES DATA SHEET v1.8 | Apr 2018 www.tangio.ca 1 Standard Force Sensor CONTENTS Force Sensing Resistor TPE-500 TPE-501 TPE-502 TPE-503 TPE-506 TPE-508 TPE-510 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Force Sensing Potentiometer (FSP) TPE-520 TPE-521 TPE-530 Tangio TPE-500 Series Standard Force Sensor Data Sheet Page 10 Page 11 Page 12 v1.8 | Apr 2018 www.tangio.ca 2 TPE-500 / TPE-500s Force Sensing Resistor Mechanical data o7.62 o5.60 Active area Active area Thickness (inc. 0.05mm adhesive) o5.60mm Trace width 0.25mm 0.325 / 0.250mm Trace pitch 0.50mm Mode 15.80 Top view Shunt Spacer height 0.125 / 0.050mm Sensor overall width 7.62mm Tail length 9.00mm Sensor overall length 15.80mm Tail width 6.35mm Scale 2:1 6.35 Interconnect options and part numbers TPE-500A / TPE-500sA Stacked view A B C D E F Adhesive PET FSR Spacer Tail carbon Silver conductive TPE-500B / TPE-500sB Exposed carbon traces TPE-500C / TPE-500sC YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 8% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 4% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 8% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 7% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 30g / < 10g Up to 5kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Device characteristics and mechanical data stated in orange text refer to TPE-500s. All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 3 o7.62 o5.60 Active area TPE-501 / TPE-501s Force Sensing o7.62 Resistor o5.60 Active area o7.62 o5.60 Active area Mechanical data 38.10 Active area 38.10 Thickness (inc. 0.050mm adhesive) 38.10 o5.60mm Trace width 0.25mm 0.325 / 0.250mm Trace pitch 0.50mm Mode Top view Shunt Spacer height 0.125 / 0.050mm Sensor overall width 7.62mm Tail length 30.00mm Sensor overall length 38.10mm Tail width 6.35mm Scale 2:1 6.35 Interconnect options and part numbers 6.35 TPE-501A / TPE-501sA Stacked view A B C D E F G Adhesive PET FSR Spacer Dielectric Tail carbon Silver conductive 6.35 TPE-501B / TPE-501sB Exposed carbon traces TPE-501C / TPE-501sC YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F G B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 8% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 4% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 8% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 7% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 30g / < 10g Up to 5kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Device characteristics and mechanical data stated in orange text refer to TPE-501s. Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 4 TPE-502 Force Sensing Resistor Mechanical data o18.00 o14.70 Active area Active area o14.70mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode 25.00 Top view Shunt Spacer height 0.125mm Sensor overall width 18.00mm Tail length 9.00mm Sensor overall length 25.00mm Tail width 7.62mm Scale 1:1 7.62 Interconnect options and part numbers TPE-502A Stacked view A B C D E F Adhesive PET FSR Spacer Tail carbon Silver conductive TPE-502B Exposed carbon traces TPE-502C YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 7% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 3% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 12% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 3% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 15g Up to 5kg < 1% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 5 TPE-503 Force Sensing Resistor o18.00 o14.70 Active area Mechanical data Active area 56.34 o14.70mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode Top view Shunt Spacer height 0.125mm Sensor overall width 18.00mm Tail length 38.00mm Sensor overall length 56.34mm Tail width 7.62mm Scale 1:1 7.62 Interconnect options and part numbers TPE-503A Stacked view A B C D E F G Adhesive PET FSR Spacer Dielectric Tail carbon Silver conductive TPE-503B Exposed carbon traces TPE-503C YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F G B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 7% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 3% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 12% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 3% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 15g Up to 5kg < 1% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 6 TPE-506 Force Sensing Resistor 43.69 x 43.69 39.70 x 39.70 Active area Mechanical data Active area 39.70 x 39.70mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) 83.09 Mode Top view Shunt Spacer height 0.125mm Sensor overall width 43.69mm Tail length 39.40mm Sensor overall length 83.09mm Tail width 7.62mm Scale 1:2 7.62 Interconnect options and part numbers TPE-506A Stacked view A B C D E F G Adhesive PET FSR Spacer Tail dielectric and dots Tail carbon Silver conductive TPE-506B Exposed carbon traces TPE-506C YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F G B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 8% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 4% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 8% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 7% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 20g Up to 5kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependant on actuation interface, mechanics, touch location, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 7 TPE-508 Force Sensing Resistor 15.20 604.60 x 10.20 Active area Mechanical data 622.30 Active area 604.60 x 10.20mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode Top view Shunt Spacer height 0.125mm Sensor overall width 15.20mm Tail length 12.70mm Sensor overall length 622.30mm Tail width 7.60mm Scale 1:1 Interconnect options and part numbers 7.60 TPE-508A Stacked view A B C D E F G Adhesive PET FSR Spacer Dielectric Tail carbon Silver conductive TPE-508B Exposed carbon traces TPE-508C YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F G B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 7% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 3% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 12% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 12% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg Operational temp. range 100 cycles at 0.5kg < 20g Up to 5kg < 1% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean 5% Avg. change in resistance of 100 samples -20 to +85C Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 8 TPE-510 Force Sensing Resistor o30.50 o25.42 Active area Mechanical data Active area 69.00 o25.42mm Trace width 0.25mm 0.425mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode Top view Shunt Spacer height 0.125mm Sensor overall width 30.50mm Tail length 38.00mm Sensor overall length 69.00mm Tail width 7.62mm Scale 1:1 Interconnect options and part numbers 7.62 TPE-510A Stacked view A B C D E F G Adhesive PET FSR Spacer Dielectric Tail carbon Silver conductive TPE-510B Exposed carbon traces TPE-510C YIDA. bronze/tin plated solder tab P/N# YD-1-254-10 A CNT female phos. bronze/tin plated termination pins P/N# 3043-001-00 w/HX standard housing P/N# HX-25406-2Y B C D E F G B Device characteristics Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 7% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 3% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 8% Avg. change in resistance of 5 sensors Lifecycle durability (10M) 1kg force at 3Hz 3% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg < 10g Up to 5kg < 1% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 2% 1 standard deviation/mean +/- 4% 1 standard deviation/mean -20 to +85C Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependent on actuation interface, mechanics, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 9 Force Sensing Potentiometer 20.00 x 109.00 13.00 x 100.00 Active area 2.00 x 98.00 Dead front window TPE-520 Mechanical data Active area 13.00 x 100.00mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode Thru Spacer height 0.125mm Sensor overall width 20.00mm Tail length 75.00mm Sensor overall length 184.00mm Tail width 10.00mm Interconnect option and part number 109.00 TPE-520C Nicomatic crimp P/N# 14106-12 with Nicomatic housing P/N# OF03 Device characteristics 75.00 6.00 Top view Scale 1:1 10.00 Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 2% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 9% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 10% Avg. change in resistance of 5 sensors Lifecycle durability (1M) 1kg force at 3Hz 4% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg Linear resistance Resistance between pins 1 and 2 < 20g Up to 1kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 5% 1 standard deviation/mean +/- 10% 1 standard deviation/mean -20 to +60C 1.25k +/- 15% Average of 100 parts same batch Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependant on actuation interface, mechanics, touch location, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 10 Force Sensing Potentiometer 20.00 x 59.00 13.00 x 50.00 Active area 2.00 x 48.00 Dead front window TPE-521 Mechanical data Active area 13.00 x 50.00mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode 59.00 Thru Spacer height 0.125mm Sensor overall width 20.00mm Tail length 75.00mm Sensor overall length 134.00mm Tail width 10.00mm Interconnect option and part number TPE-521C Nicomatic crimp P/N# 14106-12 with Nicomatic housing P/N# OF03 Device characteristics 75.00 6.00 Top view Scale 1:1 10.00 Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 2% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 9% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 10% Avg. change in resistance of 5 sensors Lifecycle durability (1M) 1kg force at 3Hz 4% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg Linear resistance Resistance between pins 1 and 2 < 20g Up to 1kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 5% 1 standard deviation/mean +/- 10% 1 standard deviation/mean -20 to +60C 0.76k +/- 15% Average of 100 parts same batch Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependant on actuation interface, mechanics, touch location, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 11 Force Sensing Potentiometer o46.00 o12.00 o36.00 Active area o42.50 Dead front window TPE-530 Mechanical data Active area (inner / outer) o16.00 / o36.00mm Trace width 0.25mm 0.375mm Trace pitch 0.50mm Thickness (inc. 0.05mm adhesive) Mode 1.25 Thru Spacer height 0.125mm Sensor overall width 46.00mm Tail length 49.80mm Sensor overall length 95.80mm Tail width 11.00mm 10.00 Interconnect option and part number TPE-530C 6.00 Nicomatic crimp P/N# 14106-12 with Nicomatic housing P/N# OF04 Device characteristics Top view Scale 1:1 8.00 11.00 Characteristic Description Value Notes Actuation force Force to reach 10M Force range linear region of log/log Long term drift 1kg for 48hrs Single part repeatability 100 actuations of 1kg Part to part repeatability 100 sensors same batch Low temp. storage -20C for 250hrs 2% Avg. change in resistance of 5 sensors High temp. storage +85C for 250hrs 9% Avg. change in resistance of 5 sensors High humidity storage +85C/85%RH for 250hrs 10% Avg. change in resistance of 5 sensors Lifecycle durability (1M) 1kg force at 3Hz 4% Avg. change in resistance of 4 sensors Hysteresis 100 actuations of 1kg 5% Avg. change in resistance of 100 samples Operational temp. range 100 cycles at 0.5kg Linear resistance Resistance between pins 1 and 2 < 20g Up to 1kg < 2% Average of 100 samples Higher forces can be achieved with custom sensor and actuation methods Per log time 5% 1 standard deviation/mean +/- 10% 1 standard deviation/mean -20 to +60C +/- 15% Average of 100 parts same batch Note: All values typical, and quoted at 10N applied force unless otherwise stated. Force dependant on actuation interface, mechanics, touch location, and measurement electronics. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 12 CONTACT Tangio Printed Electronics 100-55 Gostick Place North Vancouver, BC Canada V7M 3N2 +1.800.567.9835 +1.604.988.1125 - Toll free (US & Canada) - Direct dial www.tangio.ca General info@tangio.ca Regional americas@tangio.ca emea@tangio.ca apac@tangio.ca - The Americas - Europe, Middle East & Africa - Asia Pacific (c) Tangio Printed Electronics, a division of Sytek Enterprises Inc. Tangio reserves all rights in this information and in it's commercial use. This information is supplied for reference only and is not warranted. Tangio TPE-500 Series Standard Force Sensor Data Sheet v1.8 | Apr 2018 www.tangio.ca 13