Emboss Tape LEB CONNECTOR 4.0mm pitch/For LED Lamp/Board-to-board, Disconnectable Crimp style connectors * Absorption misalignment mechanism (only connector pitch direction) * The PCB layout is in common with plug and receptacle connectors. * Mechanism for preventing wrong insertion * Crimp type socket that is mated with receptacle connector is available. Receptacle Plug Specifications ------------------- Crimp type socket <For board-to-board> * Current rating: 3A AC, DC * Voltage rating: 300V AC, DC * Temperature range: -55C to +105C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20m max. After environmental testing/ 40m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,700V AC/minute Receptacle Plug Crimp type socket <For disconnectable crimp style> Considering about luminescence property of LED device, this LEB connector is designed as low profile type connector (height: 2.7mm) for LED lighting, and achieves the space saving. The horizontal connection between PCBs enables and the mechanism of absorbing the PCB misalignment has been installed considering the parallel use for the connector. Fork type contact that has a high contact pressure (receptacle side) and enough mating stroke provide the stable contact performance even if the PCB expands and contracts due to heat. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 8.3 0.1 0 Connector outline 0 10.1 (11) 1.2 0.05 0.03 1.5 PC board edge (0.05) 0.2 0.03 (0.05) 0.1 0 0 0 4.05 3.05 -0.1 1.2 0.1 0 0.8 3.05 -0.1 0.1 0 0.05 1 1.5 0.1 0 0.8 0.05 4 0.05 0.1 0 4 0.05 4.05 8.30.05 0 0.2 0.1 * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Receptacle Plug PC board edge * Current rating: 3A AC, DC (AWG #22) * Voltage rating: 300V AC, DC * Temperature range: -55C to +105C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 20m max. After environmental testing/ 40m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,700V AC/minute * Applicable wire: Conductor size/ AWG #26 to #22 Insulation O.D./ 0.95 to 1.3mm Connector outline Note: 1. The above figure is the figure viewed from the connector mounting side. Note: 2. Tolerances are non-cumulative: 0.05mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. 1 LEB CONNECTOR Plug <2 circuits> 2.7 2.7 <Single circuit> 5.4 4.8 5.4 4 8.8 9 9 Circuits Model No. Q'ty / reel 1 01P-LEBSS-TF 2,000 2 02P-LEBSS-TF 2,000 Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 9T, UL94V-0, white Solder tab: Copper alloy, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. Receptacle <Single circuit> <2 circuits> 8.8 5.4 5.4 2.7 A JST JST 2.7 4 H H A 4.8 Circuits Model No. Q'ty / reel 1 01R-LEBSS-TB 2,000 2 02R-LEBSS-TB 2,000 Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Housing: PA 9T, UL94V-0, white Solder tab: Copper alloy, tin-plated (reflow treatment) RoHS compliance This product displays (LF)(SN) on a label. Note: The products listed above are supplied on embossed-tape. 2 LEB CONNECTOR Contact Model No. SLEB-001T-P0.2 0.130.33 6.15 2.2 0.8 Applicable wire AWG# Insulation O.D. (mm) mm2 2622 0.951.3 Q'ty / reel 15,000 Material and Finish 2.75 1.4 Copper alloy, tin-plated (reflow treatment) 1.15 RoHS compliance Applicator Dies Crimping machine Crimp applicator Contact SLEB-001T-P0.2 MKS-L AP-K2N Crimp applicator with dies MK/SLEB-001-02 APLMK SLEB001-02 Housing <Single circuit> <2 circuits> A A H JST H JST 7 3 8.05 8.05 4 3.25 2.5 2.5 3.25 Circuits Model No. Q'ty / bag 1 LEBRP-01V-S 2,000 2 LEBRP-02V-S 2,000 Material PBT, UL94V-0, natural RoHS compliance 3