NL17SZ02 2-Input NOR Gate The NL17SZ02 is a single 2-input NOR Gate in two tiny footprint packages. The device performs much as LCX multi-gate products in speed and drive. Features * * * * * * * * * Tiny SOT-353 and SOT-553 Packages 2.4 ns TPD at 5 V (typ) Source/Sink 24 mA at 3.0 V Over-Voltage Tolerant Inputs Pin For Pin with NC7SZ02P5X, TC7SZ02FU and TC7SZ02AFE Chip Complexity: FETs = 20 Designed for 1.65 V to 5.5 V VCC Operation These Devices are Pb-Free and are RoHS Compliant NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable http://onsemi.com MARKING DIAGRAMS 5 1 SOT-353/SC70-5/SC-88A DF SUFFIX CASE 419A L3 = Specific Device Marking M = Date Code G = Pb-Free Package (Note: Microdot may be in either location) 5 B 1 A 2 GND 3 5 L3 M B w1 L3 M 1 = Specific Device Marking = Date Code PIN ASSIGNMENT Y Figure 1. Pinout (Top View) A 5 1 SOT-553 XV5 SUFFIX CASE 463B VCC 4 L3 MG G Y Pin Function 1 A 2 B 3 GND 4 Y 5 VCC FUNCTION TABLE Figure 2. Logic Symbol Output Input Y=A)B A B Y L L H L H L H L L H H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. (c) Semiconductor Components Industries, LLC, 2011 April, 2012 - Rev. 5 1 Publication Order Number: NL17SZ02/D NL17SZ02 MAXIMUM RATINGS Symbol Parameter Value Unit VCC DC Supply Voltage *0.5 to )7.0 V VIN DC Input Voltage *0.5 to )7.0 V *0.5 to VCC + 0.5 V VOUT DC Output Voltage IIK DC Input Diode Current *50 mA IOK DC Output Diode Current *50 mA IOUT DC Output Sink Current $50 mA ICC DC Supply Current per Supply Pin $100 mA *65 to )150 C 260 C TSTG Storage Temperature Range TL Lead Temperature, 1 mm from Case for 10 Seconds TJ Junction Temperature Under Bias qJA Thermal Resistance PD Power Dissipation in Still Air at 85C MSL Moisture Sensitivity FR Flammability Rating ESD ESD Classification )150 C SOT-353 (Note 1) SOT-553 350 496 C/W SOT-353 SOT-553 186 135 mW Level 1 Oxygen Index: 28 to 34 UL 94 V-0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Class Z Class A N/A Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2-ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A, rated to EIA/JESD22-A114-B. 3. Tested to EIA/JESD22-A115-A, rated to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 1.65 5.5 V VCC DC Supply Voltage VIN DC Input Voltage 0 5.5 V DC Output Voltage 0 5.5 V -55 +125 C 0 0 100 20 ns/V VOUT TA Operating Temperature Range tr, tf Input Rise and Fall Time VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V http://onsemi.com 2 NL17SZ02 DC ELECTRICAL CHARACTERISTICS Symbol Parameter Condition TA = 255C VCC (V) Min 0.75 VCC 0.7 VCC VIH High-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VIL Low-Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VOH High-Level Output Voltage VIN = VIL or VIH IOH = 100 mA IOH = -3 mA IOH = -8 mA IOH = -12 mA IOH = -16 mA IOH = -24 mA IOH = -32 mA 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 VOL Low-Level Output Voltage VIN = VIH or VOH IOL = 100 mA IOL = 3 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 Input Leakage Current VIN = 5.5 V or GND IOFF Power Off Leakage Current VIN = 5.5 V or VOUT = 5.5 V ICC Quiescent Supply Current VIN = 5.5 V or GND IIN -555C v TA v 1255C Typ Max Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 Max VCC 1.52 2.1 2.4 2.7 2.5 4.0 Unit V 0.25 VCC 0.3 VCC VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 V V 0.1 0.24 0.3 0.4 0.4 0.55 0.55 0.1 0.24 0.3 0.4 0.4 0.55 0.55 V 0 to 5.5 $0.1 $1.0 mA 0 1 10 mA 5.5 1 10 mA 0.08 0.20 0.22 0.28 0.38 0.42 AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns VCC Symbol tPLH tPHL -555C v TA v 1255C Condition Min Typ Max Min Max Unit RL = 1 MW, CL = 15 pF 1.65 2.0 5.3 11.5 2.0 12.0 ns RL = 1 MW, CL = 15 pF 1.8 2.0 4.4 9.5 2.0 10.0 RL = 1 MW, CL = 15 pF 2.5 $ 0.2 0.8 2.9 6.5 0.8 7.0 RL = 1 MW, CL = 15 pF 3.3 $ 0.3 0.5 2.3 4.5 0.5 4.7 1.5 2.9 5.0 1.5 5.2 0.5 1.9 3.9 0.5 4.1 0.8 2.4 4.3 0.8 4.5 Parameter Propagation Delay (Figure 3 and 4) TA = 255C (V) RL = 500 W, CL = 50 pF RL = 1 MW, CL = 15 pF 5.0 $ 0.5 RL = 500 W, CL = 50 pF CAPACITIVE CHARACTERISTICS Symbol Typical Unit CIN Input Capacitance Parameter VCC = 5.5 V, VI = 0 V or VCC Condition u4 pF CPD Power Dissipation Capacitance (Note 5) 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 30 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. http://onsemi.com 3 NL17SZ02 tf = 3 ns tf = 3 ns 90% INPUT A and B VCC 90% 50% 50% 10% 10% tPHL INPUT GND OUTPUT RL tPLH CL VOH OUTPUT Y 50% 50% A 1-MHz square input wave is recommended for propagation delay tests. VOL Figure 3. Switching Waveform Figure 4. Test Circuit ORDERING INFORMATION Package Shipping NL17SZ02DFT2G SC-88A/SOT-353/SC-70-5 (Pb-Free) 3000 / Tape & Reel NLV17SZ02DFT2G* SC-88A/SOT-353/SC-70-5 (Pb-Free) 3000 / Tape & Reel NL17SZ02XV5T2G SOT-553 (Pb-Free) 4000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q100 Qualified and PPAP Capable. http://onsemi.com 4 NL17SZ02 PACKAGE DIMENSIONS SOT-353 (SC-88A, SC-70) DF SUFFIX CASE 419A-02 ISSUE J A G 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 4 -B- S 1 2 3 D 5 PL 0.2 (0.008) B M DIM A B C D G H J K N S M N J INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 C K H SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NL17SZ02 PACKAGE DIMENSIONS SOT-553 XV5 SUFFIX CASE 463B ISSUE B D -X- 5 A 4 1 e 2 E -Y- 3 b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. L DIM A b c D E e L HE HE c 5 PL 0.08 (0.003) M X Y MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL17SZ02/D