MODEL: K17A-0101 17" OPEN FRAME MONITOR SPECIFICATION Version 1.0 Date 04/12/2013 17" Open Frame Monitor Specification V1.0 We are committed to continuous improvement of the TRuTM Projected Capacitive Multi-Touch Monitors product designs and performance. This document is therefore subject to change without notice. Please contact a customer representative to insure that you have the most current specification. Products are not intended for use in safety-critical or military/aerospace applications, and customer is responsible for all legal and regulatory requirements associated with use in such applications. 17" Open Frame Monitor Specification V1.0 TABLE OF CONTENTS 1 GENERAL SPECIFICATIONS ..............................................................................................1 1.1 Display Specifications ................................................................................................1 1.2 Physical Specifications...............................................................................................2 1.3 Electrical Specifications .............................................................................................2 1.4 Touch Specifications ..................................................................................................2 1.5 Environmental Specifications ....................................................................................3 1.6 Miscellaneous Specifications .....................................................................................3 2 MECHANICAL DRAWINGS .................................................................................................4 2.1 Overview Geometry ...................................................................................................4 2.2 Mounting Geometry ...................................................................................................4 1 GENERAL SPECIFICATIONS 1.1 DISPLAY SPECIFICATIONS Characteristic Value LCD Size/Type 17" Diagonal TFT Active Matrix Panel Aspect Ratio 5:4 Active Area Pixel Pitch Comment Horizontal 338.9 mm Vertical 271.3 mm Horizontal .264 mm Vertical .264 mm Panel Resolution 1280 X 1024 Native Display Modes VGA 640 X 480 (60/66/70/72/75 Hz) VGA 720 X 400 (70 Hz) SVGA 800 X 600 (60/70/72/75 Hz) XGA 1024 X 768 (60/70/75 Hz) SXGA 1280 X 1024 (60/70/75 Hz) Display Color 16.7 Million Contrast Ratio 1000:1 Brightness 225 nits Typical Response Time 5 ms Typical Viewing Angle Video Input Format 6 bits + HI-FRC Horizontal 160 Vertical 160 Typical RGB Analog 0.7V peak to peak Video Sync Format Separated H&V Sync / Composite Sync / Sync-on Green Video Signal Input D-sub 15 pin female (Analog) Page 1 of 5 1.2 PHYSICAL SPECIFICATIONS Characteristic Value Dimensions Width 394.0 mm Height 330.0 mm Depth 57.1 mm Net Weight 4.8 kg Shipping Weight 7.0 kg Box Dimensions 1.3 Length 480 mm Width 415 mm Height 160 mm See Drawings in Section 2.1 ELECTRICAL SPECIFICATIONS Characteristic Value Comment Power Supply DC 12V 4.16A Power Brick Included Power Consumption 1.4 Comment Operating 25 W Sleep 3W Off 1W Typical Value TOUCH SPECIFICATIONS Touch Technology Projected Capacitive Touch Interface USB (Type B) Multi-Touch Support At least 2 unambiguous points Maximum Report Rate 75 points per second OS Supported Native Support Driver Support Multi-Touch Windows 7 Single Touch Windows Vista and Prior Versions of Windows (HID) Multi-Touch All Windows, Linux (Ubuntu), Mac OS X, QNX Neutrino RTOS Page 2 of 5 1.5 ENVIRONMENTAL SPECIFICATIONS Condition Temperature Humidity 1.6 Specification Operating 0C ~ +40C Storage -20C ~ +60C Operating 20% ~ 80% Storage 10% ~ 90% MISCELLANEOUS SPECIFICATIONS OSD Keys Control Key Power On/Off, Select, Down, Up OSD Options Contrast, Brightness, Auto Adjust, Left/Right, Down/Up Horizontal Size, Fine, OSD Left/Right, OSD Down/Up OSD Timeout, Factory Reset, Language, RGB, Audio Remote Optional remote is available for controlling all OSD functions Audio Not Available in Slim Line Model Plug & Play DDC 2B Compatible Compliance TUV, CE, UL, CUL, FCC-B, RoHS Page 3 of 5 2 MECHANICAL DRAWINGS 2.1 OVERVIEW GEOMETRY Page 4 of 5 2.2 MOUNTING GEOMETRY Page 5 of 5