2 of 5
FEATURES
- 1300/1550 NM Wavelength - Low power consumption
- For Singlemode Applications - Standard +5V or -5V Power Supply
- Data Rate upto 622 Mb/s - 20 Pin Dip Package with FC,ST or Pigtail
- Sonet Compatible - Standard ECL Interface
TRANSMITTER CHARACTERISTICS ( T= -40°C TO +85°C)
Parameter Symbol Minimum Typical Maximum Unit
Wavelength λ1273 1310 1355 nm
Spectral Width ∆λ 2.5 nm
Output Power ( Average ) P0SEE CHART BELOW
Wavelength λ1480 1550 1580 nm
Spectral Width ∆λ NA nm
Output Power ( Average ) P0SEE CHART BELOW
Transmit Disable Voltage Vd Vcc-2.0 Vcc V
Extinction Ratio 8dB
Supply Voltage Vcc-Vee 4.75 5.0 5.5 V
Supply Current Iee 70 140 mA
Input Data Voltage-High VIH Vcc-1.18 Vcc-0.75 V
Input Data Voltage-Low VIL Vcc-1.94 Vcc-1.5 V
Laser Bias Monitor Voltage 0.001 0.95 V
Back Facet Monitor Voltage 0.015 0.7 V
Eye Diagram Per CCITT G.957
NOTE: All Parameters are specified at OC-12
AVERAGE OUTPUT POWER ( T= -40°C to +85°C, 50% DUTY CYCLE )
Part Number
1300 nm Singlemode Min Typ Max Unit Part Number
1550 nm Singlemode Min Typ Max Unit
MRTLxx0003(IR) .03 .05 .16 mW MRTLXX50003(IR) .03 .05 .16 mW
MRTLXX001 0.1 0.2 0.4 mW MRTLxx5001 0.1 0.2 0.4 mW
MRTLXX003 0.3 0.5 1.0 mW MRTLXX5003 0.3 0.5 1.0 mW
MRTLXX005(LR) 0.5 1.0 1.6 mW MRTLXX5005(LR) 0.5 1.0 1.6 mW
MRTLXX010 1.0 1.5 2.0 mW
XX = SP- Singlemode Pigtail, ST- Singlemode ST, FC- Singlemode FC,
3 of 5
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL RATING UNIT
Supply Voltage Vcc-Vee 6.0 VOLTS
Lead Soldering Temp 260 °C
Lead Soldering Time 10 SECONDS
Operating Temp -40 to +85 °C
Storage Temp -40 to +85 °C
Pinout Diagram Top View
Application Circuit
R = 10KΩ, R1 = R1* = 1.6 Z0 , R2 = R2* = 2.6 Z0, ( For Short Line Z0 = 50Ω ) C= 0.1µF
4 of 5
Package Style “ST”
Package Style “FC”
Package Style “SP”
Package Style “SC”
5 of 5
Ordering Information
Part Number(1310nm) Termination Temperature Rating
MRTLSPxxx-7L12-A None 0°C to +65°C
MRTLSPxxx-7L12-B None -40°C to +85°C
MRTLSPxxx-7L12-C ST 0°C to +65°C
MRTLSPxxx-7L12-D ST -40°C to +85°C
MRTLSPxxx-7L12-E FC 0°C to +65°C
MRTLSPxxx-7L12-F FC -40°C to +85°C
MRTLSPxxx-7L12-G SC 0°C to +65°C
MRTLSPxxx-7L12-H SC -40°C to +85°C
MRTLSTxxx-7L12-I None 0°C to +65°C
MRTLSTxxx-7L12-J None -40°C to +85°C
MRTLFCxxx-7L12-K None 0°C to +65°C
MRTLFCxxx-7L12-L None -40°C to +85°C
MRTLSPxxx-7L12-M DIN 0°C to +65°C
MRTLSPxxx-7L12-N DIN -40°C to +85°C
MRTLSCxxx-7L12-O None 0°C to +65°C
MRTLSCxxx-7L12-P None -40°C to +85°C
Part Number(1550nm) Termination Temperature Rating
MRTLSP5xxx-7L12-A None 0°C to +65°C
MRTLSP5xxx-7L12-B None -40°C to +85°C
MRTLSP5xxx-7L12-C ST 0°C to +65°C
MRTLSP5xxx-7L12-D ST -40°C to +85°C
MRTLSP5xxx-7L12-E FC 0°C to +65°C
MRTLSP5xxx-7L12-F FC -40°C to +85°C
MRTLSP5xxx-7L12-G SC 0°C to +65°C
MRTLSP5xxx-7L12-H SC -40°C to +85°C
MRTLST5xxx-7L12-I None 0°C to +65°C
MRTLST5xxx-7L12-J None -40°C to +85°C
MRTLFC5xxx-7L12-K None 0°C to +65°C
MRTLFC5xxx-7L12-L None -40°C to +85°C
MRTLSP5xxx-7L12-M DIN 0°C to +65°C
MRTLSP5xxx-7L12-N DIN -40°C to +85°C
MRTLSC5xxx-7L12-O None 0°C to +65°C
MRTLSC5xxx-7L12-P None -40°C to +85°C
xxx = Output Power from Chart
CLASS 1 DEVICE. THIS PRODUCT CONFORMS TO APPLICABLE REQUIREMENTS OF 21
CFR 1040 AT THE DATE OF MANUFACTURE(CDRH). THIS PRODUCT ALSO MEETS THE
REQUIREMENTS OF EN 60950 AND EN 60825 (TUV). APPLICABLE TO DEVICES WITH
MAXIMUM OUTPUT POWER OF 1MW.
Tx-7l12.doc 6/10/97
