PW130 POE INJECTOR UNIVERSAL 20 WATT PW130 POWER OVER ETHERNET (POE) U N I V E R S A L 2 0 W AT T * PW130 Ault Part No. Voltage DC Max Amps Max Watts PW130RA4800_01 48V 0.42 20.16 Self-contained Injector * 100-250 VAC Universal Input * Desktop Style * Single Output up to 20W * Not compliant with IEEE 802.3af standard * Regulated Output With Low Ripple * Meets Safety Agency Requirements * Complies With EMI/RFI Regulations * CE Ault AultPart PartNo. No.Key Key PW130 R A 48 Product Family Name Design Revision Changes Voltage Connector DC Model Type Manufacturing Location (volume dependent) Compliant * Impact Resistant Polycarbonate Enclosure * Private Label Marking Available * 1 Year Warranty * Modified and Custom Designs Also Available A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com (c) Copyright 2004 Ault Inc. 00 _ 01 Input Configuration/ Model Type (see pg. 2) Standard (no modifications, or special packaging) PW130 POE INJECTOR UNIVERSAL 20 WATT Input Safety Approvals Voltage 100-250 VAC -10%, +6% Line Frequency Agency Listings cULus: UL/CSA60950; TUV: EN60950; CE: LVD, EMCD 47 - 63 Hz Current 0.5A max. at 90 VAC input Protection Internal primary current fuse, Inrush limiting Configuration Inlet type : IEC320-C14; IEC320-C8 Output Electrical Topology Switching - Fixed frequency flyback Dielectric Withstand 3000 VAC, 4250 VDC primary- secondary 500 VDC secondary-ground Spacing 6.4mm primary-secondary Leakage Current Less than 750 uA Combined Line and Load Voltage Regulation 1% excluding cord Efficiency Minimum 65% Ripple 1% V p-p max for output current of >0.175A EMI Complies with EMC Directives Transient Response 0.5 msec. for 50% load change typical CE CE Compliant Holdup Time 18 msec min. @120 VAC 60 msec min. @240 VAC MTBF 100,000 Calculated Hours Protection Foldback overcurrent protection Short Circuit Protection Environmental Cord and Connector Dual RJ45 jacks built into the enclosure Operating Temperature 0 to 40C with no derating Storage Temperature -30 to +85C Relative Humidity 5% to 95% non-condensing Altitude 0-10,000 feet Cooling Convectional - non vented case Mechanical 87654321 87654321 J1 J2 (Power and Data Out) (Data In) (Rear of Unit) J1 pins J2 pins 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 +power +power - power - power Note: Case Dimensions 107.9L x 66.5W x 38.6H (mm) Case Material Black, 94V0 Polycarbonate Weight 7 Ounces, 198 grams Input Configuration no connection no connection no connection no connection indicates connections between J1 and J2 IEC320 w/ground C14 (F) Shaver C8 (N) Specify the Input Configuration Code in your order. A U LT I N C O R P O R AT E D 7105 Northland Terrace | Minneapolis, Minnesota 55428 | USATEL (1) 763-592-1900 FAX (1) 763-592-1911 | E-MAIL info@aultinc.com | WEB www.aultinc.com (c) Copyright 2004 Ault Inc.