• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
M (U)
-
1W Serie
s
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1108, REV. -
DC-DC Converters
Fixed Input, 1000V Isolation, Unregulated, Single Output, Mini-Package
FEATURES:
• Isolation Voltage: 1000Vdc
• Isolation Resistance (1): 1000MΩ
• Short-Circuit Duration: 1 second
• Case Temperature Rise: Max. 25°C, Typ. 15°C
• Cooling Method: Free-Air Cooling
• Standby Power Dissipation:1W (100mW)
• Operating Temp.: -40°C ~ + 85°C
• Storage Temp.: -55°C ~ + 125°C
• Humidity: ≤ 95%
• Soldering Temp. (2): 300°C
• Case Material: Non-Flammable Material (UL94-V0)
• Mean Time Before Failure:> 1,000,000 hours (Operating Temp. 25°C)
M (U) Single Output Mini Package-1W Series Input Characteristics
Part Number Nominal Input Voltage Input Voltage Range Maximum Input Voltage*
M05XXHL/F1U 5Vdc 4.5~5.5Vdc 7Vdc
M12XXHL/F1U 12Vdc 10.8~13.2Vdc 15Vdc
M24XXHL/F1U24Vdc 21.6~26.4Vdc 28Vdc
* Voltage above this value may cause permanent damage to the device.
M (U) Single Output Mini Package-1W Series Output Characteristics
Parameter MIN TYP MAX Units
1W Output Power 0.25 1W
Line Regulation + 1.2 %
Efficiency at 100% Load 65 75 85 %
Temperature Coefficient ±0.03 %/°C
1W Ripple and Noise 75 150 mVp-p
Switching Frequency 80 100 150 kHz
1. All specifications at TA=25°C, 75% of the humidity, Nominal input voltage, full output load unless otherwise
specified.
2. Soldering for 10 seconds at 1.5mm away from the edge.
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1108, REV. -
M (U) Single Output Mini Package-1W Series Part Number List
Input Output Power SIP-1W DIP-1W
M0505HL1U M0505HF1U
M0509HL1U M0509HF1U
M0512HL1U M0512HF1U
5Vdc
M0515HL1U M0515HF1U
M1205HL1U M1205HF1U
M1209HL1U M1209HF1U
M1212HL1U M1212HF1U
12Vdc
M1215HL1U M1215HF1U
M2405HL1U M2405HF1U
M2409HL1U M2409HF1U
M2412HL1U M2412HF1U
24Vdc
5V/200m A
9V/112m A
12V/84m A
15V/67m A
1.00W
1.00W
1.00W
1.00W
M2415HL1U M2415HF1U
PIN CONFIGURATION
MxxyyHL1U PACKAGE DIMENSIONS MxxyyHF1U PACKAGE DIMENSIONS
M (U) – 1W Series
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
M (U) - 1W Series
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 1108, REV. -
Mechanical Dimension: in inches / (mm)
MxxyyHL1U PACKAGE DIMENSIONS MxxyyHF1U PACKAGE DIMENSIONS
DIMENSIONAL RECOMMENDATIONS FOR PCB LAYOUT
SIP PACKAGE DIMENSIONS DIP PACKAGE DIMENSIONS
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
