SK24A - SK215A 2.0 Amp. Surface Mount Schottky Barrier Rectifier Current 2.0 A Voltage 40 V to 150 V DO-214AC (SMA) FEATURES Low profile package Ideal for automated placement Low power losses, high efficiency High surge current capability Guarding for overvoltage protection Low forward voltage drop Solder dip 260C, 10s AEC-Q101 qualified Component in accordance to RoHS 2011/65/EU and WEEE 2002/96/EC Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C MECHANICAL DATA Case: DO-214AC (SMA). Epoxy meets UL 94V-0 flammability rating. Polarity: Color band denotes cathode end. Terminals : Matte tin plated leads, solderable per MIL-STD-750 Method 2026, J-STD-002 and JESD22-B102. Consumer grade, meets JESD 201 class 1A whisker test. HE3 suffix for high reliability grade, meets JESD 201 class 2 whisker test. TYPICAL APPLICATIONS Used in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. Maximum Ratings and Electrical Characteristics at 25 C SK24A SK26A IL II IY IZ Marking code SK210A SK215A VRRM Maximum Recurrent Peak Reverse Voltage (V) 40 60 100 150 VRMS Maximum RMS Voltage (V) 28 42 70 105 VDC Maximum DC Blocking Voltage (V) 40 60 100 150 IF(AV) Maximum Average Forward Rectified Current at Tc (See graphic) 2.0 A IFSM Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) 50 A Tj Operating Temperature Range Tstg Storage Temperature Range -55C to +150C -55C to +125C -55C to +150C Electrical Characteristics at Tamb = 25 C VF IR Maximum Instantaneous Forward Voltage @ 2.0 A (Note 1) Maximum DC Reverse Current Tj = 25 C at Rated DC Blocking Voltage Tj =100C Cj Typical Junction Capacitance (Note 4) Rthj-a Typical Thermal Resistance (Note 2) 0.5 V (Note 3) 0.7 V 0.85 V 0.5 mA 0.95 V 0.1 mA 10 mA 5.0 mA 2.0 mA 190 pF 150 pF 120 pF 88 C/W Notes: 1. Pulse Test: 300 Pulse Width, 1% Duty Cycle 2. Thermal Resistance from Junction to Case per diode 3. Pulse test: Pulse width 40ms 4. Measured at 1.0MHz and Applies Reverse Voltage of 4.0V. D.C. www.fagorelectronica.com Document Name: sk2a Version: May-12 Page Number: 1/4 SK24A - SK215A 2.0 Amp. Surface Mount Schottky Barrier Rectifier Ordering information PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) SK26A TRTB TRTB 13" diameter tape and reel 7,500 0.060 SK26A TRTS TRTS 7" diameter tape and reel 1,800 0.060 SK26A HE3 TRTB TRTB 13" diameter tape and reel 7,500 0.060 Package Outline Dimensions: (mm) 1.050.2 DO-214AC (SMA) +0.1 0.2 -0.05 2.20.3 5.10.3 1.250.25 0.150.1 PREFERRED P/N 1.250.25 Mounting Pad Layout Year code Marking code www.fagorelectronica.com Document Name: sk2a 2 2.60.3 MC WW Y 1.4-0.1 +0.2 Week code 2 4.2 Version: May-12 Page Number: 2/4 SK24A - SK215A 2.0 Amp. Surface Mount Schottky Barrier Rectifier MAXIMUM FORWARD CURRENT DERATING CURVE 50 10 A 26 SK A 24 A 0.5 0.3 0.7 0.9 1.3 1.1 VF, forward voltage (V) 1.5 A 0.1 0 0.5 P.C.B. MOUNTED ON 5 x 5 mm COPPER PAD AREAS 0 50 60 70 80 90 100 110 120 130 140 150 160 Lead temperature (C) TYPICAL JUNCTION CAPACITANCE AT RATED TL 8.3 ms Single Half Sine Wave JEDEC Method 40 30 20 10 0 1 10 Number of cycles at 60 Hz Cj, junction capacitance (pF) IFSM, peak forward surge current (A) MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 100 TYPICAL REVERSE CHARACTERISTICS SK24A; Tj = 125 C SK26A; Tj = 125 C 1 SK26A; Tj = 75 C SK24A; Tj = 75 C 0.1 SK210-2154A; Tj = 125 C SK24A; Tj = 25 C 0.01 SK210-215A; Tj =75 C 0.001 SK210-215A; Tj =25 C SK26A; Tj =25 C 0 20 40 60 80 100 120 140 Percent of rated peak reverse voltage (%) www.fagorelectronica.com Document Name: sk2a 400 Tj = 25 C f = 1.0 MHz Vsig = 50mVp-p SK 24 100 SK 21 10 0.1 1 0A -SK A- SK 26 A 21 5A 10 VR, reverse voltage (V) 100 TYPICAL TRANSIENT THERMAL IMPEDANCE Transient thermal impedance (C/W) IR, Instantaneous reverse current (mA) 100 10 15 0.01 PULSE WIDTH = 300 S 1% DUTY CYCLE 1.0 K2 0.1 1.5 A-S 1 1 5A 2 SK RESISTIVE OR INDUCTIVE LOAD 26 210 SK 2.0 SK SK IF(AV), average forward Current (A) TYPICAL FORWARD CHARACTERISTIC 24A SK IF, instantaneous forward current (A) Ratings and Characteristics (Ta 25 C unless otherwise noted) 100 10 1 0.1 0.01 0.1 1 10 T, Pulse duration (sec) 100 Version: May-12 Page Number: 3/4 SK24A - SK215A 2.0 Amp. Surface Mount Schottky Barrier Rectifier Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electronica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. www.fagorelectronica.com Document Name: sk2a Version: May-12 Page Number: 4/4