PADDED ZERO BIAS SCHOTTKY DETECTORS Detectors with internal attenuators are often requested. They are typically used in circuits where an improved RF match is needed or where the power levels applied are higher than is typical for low level detectors. Frequently, they are used in laboratory applications with associated instruments such as broadband power leveling or monitoring. These detectors are all zero bias, making them convenient to use. Features: * Superior Flatness vs. Frequency * Wide Frequency Range * Improved Return Loss * Higher Power Handling Applications: * Transmitter Monitoring * Missile Guidance Systems * Input to Low-Noise Amplifiers * Broadband Or Narrowband ECM Receivers * Power and Signal Monitors * Doppler Radar and Beacon Receivers * Matched units available for Multi-channel Receivers, Amplitude Comparator Systems and Discriminators * Laboratory Test Equipment Frequency Range (GHz) 2-4 0.01 - 8 7.9 - 8.4 7.9 - 8.4 0.01 - 12.4 0.01 - 18 0.01 - 18 5 - 18 0.01 - 20 0.01 - 20 Part (1) Number Flatness vs Frequency (+/-dB) ACSP2579NZ ACSP2539NZ ACSP2518NZ ACSP2519PZ ACSP2663NZ ACSP2544NZ ACSP2551NZ ACSP2521PZ ACSP2643NZ ACSP2644NZ 0.2 0.5 0.1 0.1 0.5/octave 0.5/octave 0.5/octave 0.5/octave 0.5/octave 1.0 TSS (dBm) Internal Attenuation (dB) Low Level Sensitivity (mV/mW)(2) Standard Case Styles Optional Case Styles -45 -45 -45 -48 -45 -45 -44 -44 -46 -44 6 6 6 3 6 6 7 6 3 7 500 500 500 1000 500 500 400 500 1000 500 C8 C3 C3 C3 C8 C3 C3 C3 C3 C15 C3,C15 C8,C15,C32,C74 C8,C15,C32 C8,C15,C32 C15,C32 C15,C32 C15,C32 C15,C32 C15,C32 C3,C32 NOTES: 1) 2) Standard output polarity is negative unless otherwise noted. If positive output is required, substitute "P" for "N" in part number. Measured into an open circuit load (>10k ohm). 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com ENVIRONMENTAL SPECIFICATIONS: MIL-E-5400, MIL-STD-202, MIL-E-16400 Storage Temp: -65C to +150C Humidity: MIL-STD-202F, M103, Cond B Shock: MIL-STD-202F, M213, Cond B Altitude: MIL-STD-202F, M105, Cond B Vibration : MIL-STD-202F, M204, Cond B Thermal Shock: MIL-STD-202F, M107, Cond A Temperature Cycle: MIL-STD-202F, M105C, Cond D Maximum Input Power: +23dBm SCREENING : Standard Screening: Internal Visual per MIL-STD-883, Method 2017 Temperature Cycle: -65C to +100C, 10 cycles Optional High-Rel Screening (Ref MIL-PRF-38534): Internal Visual per MIL-STD-883, Method 2017 Stabilization Bake per MIL-STD-883, Method 1008 Temperature Cycle per MIL-STD-883, Method 1010 Constant Acceleration per MIL-STD-883, Method 2001 Burn-in per MIL-STD-883, Method 1015 Leak Test per MIL-STD-883, Method 1014 External Visual per MIL-STD-883, Method 2009 TYPE-N MALE (INPUT) SMA MALE (INPUT) 1.320.020 2.800.020 O0.625 O0.312 BNC FEMALE (OUTPUT) SMA FEMALE (OUTPUT) CASE STYLE C3 CASE STYLE C8 O.380.02 0.42 SMA MALE (INPUT) 2.00 O0.500 1.160.020 SMA MALE (INPUT) O0.312 0.43 SMA MALE 0.250-36UNS-2B (OUTPUT) 1.550.02 SMA FEMALE (OUTPUT) BNC FEMALE (OUTPUT) SMA MALE 0.250-36UNS-2B (INPUT) CASE STYLE C15 Part Number Ordering Information: CASE STYLE C32 CASE STYLE C74 Example: ACSP2663NZC3 ACSP2663: Padded Zero Bias Schottky Detector, 0.01 - 12.4GHz N: Negative output polarity Z: Zero bias C3: Package type SP-0205 611 Industrial Way West, Eatontown, NJ 07724 tel: 732-460-0212 fax: 732-460-0214 sales@advanced-control.com www.advanced-control.com