Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 6 mm General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Note, technical data Note, accessories PT OKIECEx/ATEX rating data EU-type examination certificate Download, German Download English ATEX voltage ATEX current ATEX conductor cross-section Voltage when using cross-connections Operating temperature range 0380580000 SAK 6/35 PA/BL Feed-through terminal, 6 mm, Screw connection, PA 66, blue, TS 35 4008190029050 100 pc(s). With AWG 6 and H07V-R10 conductors, an increased MD torque of 1.4 to1.6 Nm should be used. For AWG 8-7 and AWG 8-19, tightening torque is 1.21.4 Nm When used with twin ferrules ZH 0.5 - ZH 4, the rated voltage is 690 V. Marking EN 60079-7 Marking ATEX Directive 94/9/EC KEMA97ATEX1798U KEMA97ATEX1798U_d.pdf KEMA97ATEX1798U_e.pdf 550 V 36 A 6 mm CrossConnectionGuide.pdf Einsatztemperaturbereich siehe EGBaumusterprufbescheinigung/IECEx-Certificate of Conformity Ex e II Ex II 2 G D Additional technical data Colour of insulating material Connection direction End plate required Explosion-tested version "Ex e" Installation advice Insulating material Levels cross-connected internally No. of identical terminals No. of levels No. of terminal strips per level Open sides Operating temperature range Type of connection Type of mounting UL 94 flammability rating of insulation material Version blue on side Yes Yes TS 35 PA 66 No 1 1 2 right - 50 C, + 100 C Screwed Snap-on V2 Feed-through terminal CSA rating data Voltage (CSA) 600 V -1- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 6 mm CSA rating data CSA current Min. cross-section (CSA) Max. cross-section (CSA) 47 A AWG 20 AWG 8 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) Flexible with ferrule, max. (DIN 46228 pt 1) 0.5 mm 6 mm Conductors for clamping (rated connection) Clamping range, min. Clamping range, max. Type of connection 2nd type of connection Connection direction No. of connections Stripping length Clamping screw Blade size Tightening torque range Torque level with DMS electric screwdriver Gauge to IEC 60947-1 Solid, min. Solid, max. Stranded, min. Stranded, max. Flexible, min. Flexible, max. Flexible with ferrule, min. (DIN 46228/1) Flexible with ferrule, max. (DIN 46228/1) Flexible, min., ferrule with plastic collar (DIN 46228 pt 4) Flexible, max., ferrule with plastic collar (DIN 46228 pt 4) Twin wire-end ferrule, min. Twin wire end ferrule, max. AWG conductor size, min. AWG conductor size, max. AWG conductor size, min. AWG conductor size, max. 0.33 mm 10 mm Screw connection screwed on side 2 12 mm M 3.5 4.0 x 0.8 mm 0.8...1.6 Nm 3 A5 0.5 mm 10 mm 0.5 mm 6 mm 0.5 mm 10 mm 0.5 mm 6 mm 0.5 mm 6 mm 0.5 mm 4 mm AWG 22 AWG 8 0.33 mm 8.37 mm Dimensions Width Height of lowest version Length TS 35 offset 8 mm 44 mm 45 mm 22.5 mm Disconnect terminals Torque level with DMS electric screwdriver 3 -2- Product catalogue | Terminals | Screwing technology | SAK-series modular terminals | TS 35 | Polyamide PA 6.6 | Modular feed-through terminals | 6 mm Rating data Rated cross-section Rated voltage Rated impulse voltage Rated current Standards Current with max. conductor Pollution severity 6 mm 800 V 8 kV 41 A IEC 60947-7-1 57 A 3 UL rating data Voltage (UL) Current (UL) Min. cross-section (UL) Max. cross-section (UL) 600 V 40 A AWG 22 AWG 8 Approvals Approvals institutes Classifications ETIM 2.0 ETIM 3.0 eClass 4.1 eClass 5.0 eClass 5.1 EC000897 EC000897 27-14-11-20 27-14-11-20 27-14-11-20 Similar products Order No. 0380560000 Part designation SAK 6/35 Version Feed-through terminal, 6 mm, Screw connection, PA 66, beige, TS 35 -3-