11000 AND 12000 SERIES
PROFESSIONAL TOGGLE SWITCHES
Specifications
B-56
B
APEM
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D: solid gold rivet
X910 : silver/nickel alloy (for
peak current, see section G)
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin plated PC terminals available,
see "Special options".
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
Contacts Max. current/voltage rating 2 positions 3 positions
A 2A 250VAC - 4A 125VAC - 4A 30VDC 50.000 50.000
AD2 2A 250VAC - 4A 125 VAC - 4A 30VDC 20.000 20.000
X780 Under 100mA 30VDC without damaging
the gold plating
D 200mA 250VAC - 400mA 125VAC 80.000 50.000
Low level or mechanical life 150.000 100.000
For peak current, refer to section G.
GENERAL SPECIFICATIONS
• Torque :
- 11000 = 1,25 Nm (.92 Ft.lb) max. applied between the 2 nuts
- 12000 = 1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness :
- 11000 = 2,5 mm (.098) max.
- 12000 = 4,5 mm (.177) max.
• Operating temperature : -40°C to +85°C
RELIABILITY - RUN-IN TEST
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
Number of cycles
AGENCY APPROVALS/PREFERENTIAL LISTS
QPL (Europe only)
MUAHAG
Designed to MIL specifications (12000 only)
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format.
Preferential lists do not appear on the switches.
CECC 96201-005
CECC 96201-008