PACKAGING SPECIFICATION TABLE OF CONTENTS SECTION 1.0 SCOPE 2.0 PURPOSE .. 3.0 GENERAL 4.0 PACKAGING OF STANDARD HEADERS ... . 5.0 PACKAGING OF LOW-PROFILE HEADERS ..... . 6.0 LABELING .. .. ... REVISION: ECR/ECN INFORMATION: TITLE: C TUBE PACKAGING FOR PICOFLEX SMT HEADERS EC No: IPG2013-0094 DATE: 18-Sep-12 DOCUMENT NUMBER: PK-90814-001 PAGE .2 .2 . 2 .3 .4 5 SHEET No. 1 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D.BYRNES D. Waszkiewicz J. Dennehy TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC PACKAGING SPECIFICATION 1.0 SCOPE This standard specifies the general requirements for the tube packaging of Picoflex SMT Header Assemblies, series 90814/93405. 2.0 PURPOSE The purpose of this specification is to assure that all 90814/93405 product shipped from Molex arrives damage free and in a manner that allows ease of handling, storage and distribution. 3.0 GENERAL The shipping weight for a box from Molex should not exceed 15 kg. The recommended carton closure is tape. Bubble wrap may be used to fill up excess space in a carton if required. REVISION: ECR/ECN INFORMATION: TITLE: C TUBE PACKAGING FOR PICOFLEX SMT HEADERS EC No: IPG2013-0094 DATE: 18-Sep-12 DOCUMENT NUMBER: PK-90814-001 SHEET No. 2 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D.BYRNES D. Waszkiewicz J. Dennehy TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC PACKAGING SPECIFICATION 4.0 PACKAGING OF STANDARD HEADERS The Standard Headers are packaged in transparent antistatic u.P.V.C. tubes, part no. 99024-0053. The tubes are closed on each end with tape stops, part no. 96717-0002. The tape stops are not to be placed on the face where the tube part number is printed. The full tubes are placed in a cardboard carton, part no. 91687-0012, with the PCB pegs on the header facing upwards. The carton is closed with tape. See Table 1 for packaging quantities of each circuit size. See Table 2 for Bill Of Materials for Standard Headers. TABLE 1 Circuit Size 4 6 8 10 12 14 16 18 20 22 24 26 Quantity of Headers per Tube 60 46 38 32 28 25 22 20 18 16 15 14 TABLE 2 ITEM DESCRIPTION 1 2 3 4 CARTON TUBE TAPE STOPS HEADER 91687-0012 99024-0053 96717-0002 90814/93405-*0**/ -*3** 1 105 210 See TABLE 1 TUBE PACKAGING FOR PICOFLEX SMT HEADERS DATE: 18-Sep-12 PK-90814-001 105 QUANTITY EC No: IPG2013-0094 DOCUMENT NUMBER: Quantity of Tubes per Box PART NUMBER REVISION: ECR/ECN INFORMATION: TITLE: C Quantity of Headers per Box 6,300 4,830 3,990 3,360 2,940 2,625 2,310 2,100 1,890 1,680 1,575 1,470 SHEET No. 3 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D.BYRNES D. Waszkiewicz J. Dennehy TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC PACKAGING SPECIFICATION 5.0 PACKAGING OF LOW-PROFILE HEADERS The Low-Profile Headers are packaged in transparent antistatic u.P.V.C. tubes, part no. 99024-0048. The tubes are closed on each end with tape stops, part no. 96717-0002. The tape stops are not to be placed on the face where the tube part number is printed. The full tubes are placed in a cardboard carton, part no. 91687-0012, with the PCB pegs on the header facing upwards. The carton is closed with tape. See Table 3 for packaging quantities of each circuit size. See Table 4 for Bill Of Materials for Low-Profile Headers. TABLE 3 Circuit Size 4 6 8 10 12 14 16 18 20 22 24 26 Quantity of Headers per Tube 60 46 38 32 28 25 22 20 18 16 15 14 TABLE 4 DESCRIPTION ITEM 1 2 3 4 CARTON TUBE TAPE STOPS HEADER 91687-0012 99024-0048 96717-0002 90814/93405-*6**/ -8** 1 144 288 See TABLE 3 TUBE PACKAGING FOR PICOFLEX SMT HEADERS DATE: 18-Sep-12 PK-90814-001 144 QUANTITY EC No: IPG2013-0094 DOCUMENT NUMBER: Quantity of Tubes per Box PART NUMBER REVISION: ECR/ECN INFORMATION: TITLE: C Quantity of Headers per Box 8,640 6,624 5,472 4,608 4,032 3,600 3,168 2,880 2,592 2,304 2,160 2,016 SHEET No. 4 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D.BYRNES D. Waszkiewicz J. Dennehy TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC PACKAGING SPECIFICATION 6.0 LABELLING The labels used are standard Molex Ireland labels and measure 127.0 x 76.2 mm, see example in Fig.1. The label is placed on the carton. Fig.1 REVISION: ECR/ECN INFORMATION: TITLE: C TUBE PACKAGING FOR PICOFLEX SMT HEADERS EC No: IPG2013-0094 DATE: 18-Sep-12 DOCUMENT NUMBER: PK-90814-001 SHEET No. 5 of 5 CREATED / REVISED BY: CHECKED BY: APPROVED BY: D.BYRNES D. Waszkiewicz J. Dennehy TEMPLATE FILENAME: PACKAGING_SPEC[SIZE_A4](V.1).DOC