DATEFILEREV BY EDV NO
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE Basic material
Projection
Drawing.- No.
WS-TSS 5x5mm Tact Switch with ground terminal, J-Bend SMD version
4311x30158x6
4311x30158x6.dft
10-07-13 Jelisarow
SwTact
5:1
System :Solid Edge V20
WE
eiCan
CAD
Würth Elektronik
eiCan
.x = +/- 0,1
A4
SIZE
11-08-26
General Tolerance was +/- 0,2
a WJ
11-08-30
Stroke Tolerance was +/- 0,15
b WJ
11-10-28warning textc WJ
This electronic component is designed and developed with the intention for use in general electronics
equipments.
Before incorporating the components into any equipments in the field such as aerospace, aviation,
nuclear control, submarine, transportation, (automotive control, train control, ship control),
transportation signal, disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of direct damage or injury to
human body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when used in electrical
circuits that require high safety, reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user before usage.
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
20mA, 15VDC
>Contact Resistance:
Initial: 100mOHM max.
After Life Test: 2OHM max.
>Insulation Resistance:
min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 +0.05 / - 0.1mm
MATERIAL
>Cover:
Copper alloy
>Stem:
LCP UL 94V-0
>Frame
: LCP UL 94V-0, color Black
>Contact:
Stainless Steel with silver cladding
>Terminal:
Copper alloy with silver plating
>Tape:
Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
P.C.B. MOUNTING PLAN
SCHEMATIC
3,8
Scale - 5:1
2
1
4
3
3,1
4,3
4,6
5,5
1,0
2
1
4
3
0,8
1,2
1,5
5,1 ±0,3
0,5GND
2,5
0,45
0,05 ±0,07
2,0
O
3,4 ±0,2
q
0,4
0,5
3,7
5,0 ±0,15
5,0 ±0,15
5,4
2
1
4
3
Grounded Terminal
can be effective even if not soldered
W
W
GND
GND
GND
GND
PN Force Color of Stem Life cycle
431 183 015 816 160g ± 50gf Black 1.000.000
431 153 015 826 260g ± 50gf White 200.000
GND
GND