LM101AJ-14/883 - National Semiconductor

Original Creation Date: 06/21/95

Last Update Date: 03/17/97

Last Major Revision Date: 02/18/97

MNLM101A-X REV 0A0 MICROCIRCUIT DATA SHEET

OPERATION AMPLIFIER

General Description

The LM101A is a general purpose operational amplifier which features improved performance

over industry standards such as the LM709. Advanced processing techniques make possible an

order of magnitude reduction in input currents, and a redesign of the biasing circuitry

reduces the temperature drift of input current. Improved specifications include:

- Offset voltage 3 mV maximum over temperature

- Input current 100 nA maximum over temperture

- Offset current 20 nA maximum over temperature

- Offsets guaranteed over entire common mode and supply voltage ranges

- Slew rate of 10V/uS as a summing amplifier

This amplifier offers many features which make its application nearly foolproof: overload

protection on the input and output, no latch-up when the common mode range is exceeded,

and freedom from oscillations and compensation with a single 30 pF capacitor. It has

advantages over internally compensated amplifiers in that the frequency compensation can

be tailored to the particular application. For example, in low frequency circuits it can

be overcompensated for increased stability margin. Or the compensation can be optimized to

give more than a factor of ten improvement in high frequency performance for most

applications.

In addition, the device provides better accuracy and lower noise in high impedance

circuitry. The low input currents also make it particularly well suited for long interval

integrators or timers, sample and hold circuits, and low frequency waveform generators.

Further, replacing circuits where matched transistor pairs buffer the inputs of

conventional IC op amps, it can give lower offset voltage and a drift at a lower cost.

NS Part Numbers

LM101AH/883

LM101AJ-14/883

LM101AJ/883

LM101AW/883

Industry Part Number

LM101A

Prime Die

LM101F

Processing

MIL-STD-883, Method 5004

Quality Conformance Inspection

MIL-STD-883, Method 5005

Subgrp Description Temp ( C)

1 Static tests at +25

2 Static tests at +125

3 Static tests at -55

4 Dynamic tests at +25

5 Dynamic tests at +125

6 Dynamic tests at -55

7 Functional tests at +25

8A Functional tests at +125

8B Functional tests at -55

9 Switching tests at +25

10 Switching tests at +125

11 Switching tests at -55

MICROCIRCUIT DATA SHEET

MNLM101A-X REV 0A0

(Absolute Maximum Ratings)

(Note 1)

Supply Voltage +22V

Differential Input Voltage +30V

Input Voltage

(Note 3) +15V

Ouput Short Circuit Duration

(Note 4) Continuous

Operating Ambient Temperature Range -55 C to +125 C

Maximum Junction Temperature 150 C

Power Dissipation at TA = 25C

(Note 2) 500 mWH-Package (Still Air) 1200 mWH-Package (500LF/Min Air Flow) 1000 mWJ-Package TBDJ-14-Package TBDW-Package

Thermal Resistance

ThetaJA 165 C/W H-Pkg (Still Air) 67 C/W H-Pkg (500LF/Min Air flow) 110 C/W J-Pkg (Still Air) TBD J-Pkg (500LF/Min Air flow) TBD J-14-Pkg (Still Air) TBD J-14-Pkg (500LF/Min Air flow) 233 C/W W-Pkg (Still Air) 155 C/W W-Pkg (500LF/Min Air flow)

ThetaJC 25 C/W H-Pkg TBD J-Pkg TBD J-14-Pkg 26 C/W W-Pkg

Storage Temperature Range -65 C to +150 C

Lead Temperature 300 C(Soldering, 10 seconds)

ESD Tolerance

(Note 5) 2000V

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur.

Operating Ratings indicate conditions for which the device is functional, but do not

guarantee specific performance limits. For guaranteed specifications and test

conditions, see the Electrical Characteristics. The guaranteed specifications apply

only for the test conditions listed. Some performance characteristics may degrade

when the device is not operated under the listed test conditions.

Note 2: The maximum power dissipation must be derated at elevated temperatures and is

dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to

ambient thermal resistance), and TA (ambient temperature). The maximum allowable

power dissipation at any temperature is Pdmax = (Tjmax - TA)/ThetaJA or the number

given in the Absolute Maximum Ratings, whichever is lower.

Note 3: For supply voltages less than +15V, the absolute maximum input voltage is equal to

the supply voltage.

Note 4: Continuous short circuit is allowed for case temperatures to 125 C and ambient

temperatures to 75 C for LM101A.

Note 5: Human body model, 100 pF discharged through 1.5K Ohms.

MNLM101A-X REV 0A0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: Vcc = +20V, Vcm = 0

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

Vio Input Offset

Voltage Vcm = -15V, Rs = 50 Ohms -2 2 mV 1

-3 3 mV 2, 3

Vcm = 15V, Rs = 50 Ohms -2 2 mV 1

-3 3 mV 2, 3

Rs = 50 Ohms -2 2 mV 1

-3 3 mV 2, 3

Vcc = +5V, Rs = 50 Ohms -2 2 mV 1

Vcc = +5V, Rs = 50 Ohms -3 3 mV 2, 3

Iio Input Offset

Current Vcm = -15V -10 10 nA 1

-20 20 nA 2, 3

Vcm = 15V -10 10 nA 1

-20 20 nA 2, 3

-10 10 nA 1

-20 20 nA 2, 3

Vcc = +5V -10 10 nA 1

Vcc = +5V -20 20 nA 2, 3

Iib+ Input Bias

Current Vcm = -15V 1 75 nA 1

1 100 nA 2, 3

Vcm = 15V 1 75 nA 1

1 100 nA 2, 3

175nA1

1 100 nA 2, 3

Vcc = +5V 175nA1

Vcc = +5V 1 100 nA 2, 3

MNLM101A-X REV 0A0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: Vcc = +20V, Vcm = 0

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

Iib- Input Bias

Current Vcm = -15V 1 75 nA 1

1 100 nA 2, 3

Vcm = 15V 1 75 nA 1

1 100 nA 2, 3

175nA1

1 100 nA 2, 3

Vcc = +5V 175nA1

Vcc = +5V 1 100 nA 2, 3

PSRR+ Power Supply

Rejection Ratio +Vcc=+20V and +5V, -Vcc=-20V,

Rs=50 Ohms 80 dB 1, 2,

PSRR- Power Supply

Rejection Ratio +Vcc=+20V, -Vcc=-20V and -5V,

Rs=50 Ohms 80 dB 1, 2,

CMRR Common Mode

Rejection Ratio -15V <=Vcm <=15V, Rs = 50 Ohms 80 dB 1, 2,

Icc Supply Current 3mA1

2.5 mA 2

3.5 mA 3

VioAdj+ Input Offset

Voltage Adjust 4 mV 1, 2,

VioAdj- Input Offset

Voltage Adjust -4 mV 1, 2,

Ios+ Short Circuit

Current -45 -7 mA 1, 2,

Ios- Short Circuit

Current 7 45 mA 1, 2,

Vin Input Voltage

Range Vcc = +20V 1 -15 15 V 1, 2,

Avs+ Large Signal Gain Vcc = +15V, Rs = 0, Rl=2K Ohms, Vo=10V 50 V/mV 4

Vcc = +15V, Rs = 0, Rl=2K Ohms, Vo=10V 25 V/mV 5, 6

Avs- Large Signal Gain Vcc = +15V, Rs = 0, Rl=2K Ohms,

Vo=-10V 50 V/mV 4

Vcc = +15V, Rs = 0, Rl=2K Ohms,

Vo=-10V 25 V/mV 5, 6

Rin Input Resistance 2 1.5 MOhms 4

2 0.5 MOhms 5, 6

MNLM101A-X REV 0A0 MICROCIRCUIT DATA SHEET

Electrical Characteristics

DC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: Vcc = +20V, Vcm = 0

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

Vop+ Output Voltage

Swing Rl = 10K Ohms 16 V 4, 5,

Rl = 2K Ohms 15 V 4, 5,

Rl = 10K Ohms, Vcc = +15V 12 V 4, 5,

Rl = 2K Ohms, Vcc = +15V 10 V 4, 5,

Vop- Output Voltage

Swing Rl = 10K Ohms -16 V 4, 5,

Rl = 2K Ohms -15 V 4, 5,

Rl = 10K Ohms, Vcc = +15V -12 V 4, 5,

Rl = 2K Ohms, Vcc = +15V -10 V 4, 5,

AC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: Vcc = +20V, Rl = 2K Ohms, Av = 1

Sr+ Slew Rate Vin = -5V to 5V 0.2 V/uS 7

Sr- Slew Rate Vin = 5V to -5V 0.2 V/uS 7

Gbw Gain Bandwidth Vin = 50mVrms, f = 20KHz 0.25 MHz 7

Note 1: Parameter guaranteed by the input conditions of several DC parameters.

Note 2: Parameter guaranteed, not tested.