89 Compensated * 316L SS Pressure Sensor * High Pressure * 0 - 100mV Output * Absolute and Sealed Gage DESCRIPTION The 89 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 89 compensated features 5/16-32 UNEF threads and can be welded in place. It can also be packaged in a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as well as custom process fittings. Contact factory for threaded fitting options. The 89 compensated is designed for high pressure OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensated and offset correction. An additional laser trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within 1%. Please refer to the 89 uncompensated and constant voltage datasheets for more information on different features of the 89. FEATURES * * * * APPLICATIONS Threaded Process Fittings or O-Ring Mount -40C to +125C Operating Temperature Range 0.25% Pressure Non Linearity Solid State Reliability * * * * Hydraulic Controls Process Control Pressure Calibrators Refrigeration/Compressors STANDARD RANGES Range 0 to 1000 0 to 3000 0 to 5000 0 to 10K 89C psia * * * * psis * * * * www.meas-spec.com 1/4 September 2012 89 Compensated PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Full Scale Output Span 75 125 210 mV 1 Zero Pressure Output -1.0 1.0 mV Pressure Non Linearity -0.25 0.25 %Span Pressure Hysteresis -0.1 0.1 %Span Input Resistance 3000 Output Resistance 4000 4000 5000 6000 2 Temperature Error - Span -0.75 0.75 %Span 3 Temperature Error - Zero Thermal Hysteresis - Span -0.75 0.75 %Span 3 -0.25 0.25 %Span 3 Thermal Hysteresis - Zero -.025 0.25 %Span 3 Long Term Stability - Zero/Span Supply Current Output Load Resistance Insulation Resistance (50Vdc) 0.1 0.5 1.5 %Span/yr 2.0 mA 5 M 50 M 4 5 Pressure Overload 3X Rated 6 Pressure Burst 4X Rated 7 Operating Temperature -40 +125 C 8 Compensated Temperature Range -20 +85 C 3 Storage Temperature -50 +125 C 8 9 grams Weight Media - Pressure Port Liquids and Gases compatible with 316/316L Stainless Steel Notes 1. Calculated at FSP, 3000psi and 5000psi parts are tested at 2500psi. 2. Best fit straight line between 0 and FSP. 3. Over the compensated temperature range with respect to +25C. 4. Load resistance to reduce measurement errors due to output loading. 5. Between case and sensing element. 6. 3X or 20,000psi, whichever is less. 7. 4X or 30,000psi, whichever is less. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 8. Maximum temperature range for this product with standard cable and connector is -20C to +105C. 89C www.meas-spec.com 2/4 September 2012 89 Compensated DIMENSIONS CONNECTIONS 89C www.meas-spec.com 3/4 September 2012 89 Compensated ORDERING INFORMATION 89 - 01K A - 0 P Electrical (P = Solder Pads, R = Ribbon Cable, C = Cable w/ Connector) Fitting Type Type (A = Absolute, S = Sealed Gage) Pressure Range Model NORTH AMERICA EUROPE Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel: 1-800-767-1888 Fax: 1-510-498-1578 Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel: +33 (0) 130 79 33 00 Fax: +33 (0) 134 81 03 59 Sales: pfg.cs.emea@meas-spec.com ASIA Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer's technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 89C www.meas-spec.com 4/4 September 2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 89-05KS-4R 89-01KA-4R 89-03KS-4R